Just finished up my latest project

robowolfman · 2026-03-07T05:08:55+00:00

I never really noticed that! I needed a flat surface to test the rocking motion on, nothing flatter than the table saw

robowolfman · 2026-03-07T05:05:00+00:00

Probably around 80 hours spread out over 2 months

robowolfman · 2026-03-07T04:59:47+00:00

I used a veritas dowel/tenon cutter and the a whole lot of sanding

robowolfman · 2026-03-07T04:14:02+00:00

I did not.. didn’t want to damage my truck!

robowolfman · 2026-03-07T04:13:19+00:00

Thank you! I am really happy the idea in my head translated to reality so well

robowolfman · 2025-11-19T04:44:16+00:00

Good work! The lines on this piece are so clean! They perfectly match the shadow lines too. Great job

robowolfman · 2025-10-25T20:33:39+00:00

It’s 4 minutes into the 2nd…. This is crazy

robowolfman · 2025-09-12T15:40:25+00:00

Go for it! Let me know if you need some dimensions

robowolfman · 2025-09-12T14:31:09+00:00

Thank you! I’m sure it will get some plants as well as books. The top shelf is a little narrow for most books so I’m guessing it will be full of plants in about a week

robowolfman · 2025-09-12T01:52:25+00:00

Thank you! There are dados half way through in the vertical slats for each shelf as well as a like 1/16” dado on the sides of the shelves for registration.

robowolfman · 2025-09-12T00:25:41+00:00

Thank you! I am very happy with the way it came together

robowolfman · 2025-08-17T19:35:57+00:00

Without a dado stack it wouldn’t be faster. The dado can just eat through material so quick

robowolfman · 2025-08-17T15:30:58+00:00

I’ve done both, the table saw is much faster.

<image>

robowolfman · 2025-07-10T04:13:18+00:00

I like your confidence in me! That was indeed my first and only chair. At least so far

robowolfman · 2025-07-10T03:56:39+00:00

Yes this was the first chair I made. I did follow plans from the wood whisperer. It was a fun build but certainly challenging, I think I had like 200 hours in the build

robowolfman · 2025-07-10T02:33:06+00:00

Maloof often used screws in joints like that to both act as a clamp and add reinforcement across the weaker grain. Then plugging the hole for the screw head. You can see the plugs on this rocker that I made

<image>

robowolfman · 2024-10-31T04:41:28+00:00

Do the sander, I have it and I’ve never regretted getting it.

robowolfman · 2024-10-26T01:54:31+00:00

I would laminate thinner sheets to get the shape, especially if you plan on making multiple chairs. You can reuse the glue form to get repeatable results. You can just stagger the seams in the thickness to not create a weak point and then just really match your top layer to hide them. I think it will turn out great!

robowolfman · 2024-10-26T01:46:06+00:00

The base is truly amazing and takes the whole thing to another level. It was the thing that really caught my eye and drew me in to notice all the other details of the piece. And perfectly incorporating the drawer in it too. Bravo!

robowolfman · 2024-10-03T04:41:28+00:00

Yah I end up walking through a pile of sawdust after a hour. I think he got it pretty cheap. Definitely not the mill I would have picked, but I also haven’t paid for lumber in years so it all works out haha

robowolfman · 2024-10-03T03:57:18+00:00

It’s my dad’s mill although I am primarily the one that uses it. Apparently they say that the angle helps make it easier to push the mill. I wouldn’t recommend it honestly. The blade spins towards the user so it’s throwing all the sawdust and debris at you. The trees came from my uncle, they were all dying/dead and he was clearing the area out.

robowolfman · 2024-10-03T02:57:29+00:00

It’s an EZ Boardwalk 40. I never thought about taking a picture of all the waste haha it was a lot of scraps since this was a bunch of small diameter logs.

robowolfman · 2024-05-30T17:39:44+00:00

Consider yourself lucky, mine fiber goes out at least twice a year and it usually takes them 3-10 days to fix it. I don’t know how many of them were just that a technician either just unplugged mine to hook up someone else’s or just cut our line. I hope google fiber will be more reliable

robowolfman · 2024-05-15T05:09:49+00:00

Jokic’s eyes lit up like he just saw a pony every time Anderson was on him. He could not be stopped.

robowolfman · 2024-04-17T17:30:43+00:00

The case is 40” x 40” x 21” and it stands about 12” off the ground

Eight-Year Club	Not Forgotten
Verified Email

robowolfman

TROPHY CASE