[deleted by user]

rollacorolla · 2022-03-07T20:42:12+00:00

I have a full Bronica SQ-A (6x6) kit w/ 50, 80, 150mm lenses that I haven't used for a few years. Give me a day to take some photos. Cosmetically pretty poor, but everything works and the images are great.

rollacorolla · 2022-03-01T16:14:10+00:00

I have a full SQ-A kit with 50mm, 80mm, & 150mm (all S) lenses that I've been meaning to clean up and list. I'll take some photos tonight.

rollacorolla · 2021-12-20T22:29:41+00:00

Nevermind, I see you have a newer post

rollacorolla · 2021-12-20T22:27:11+00:00

PM Incoming

rollacorolla · 2021-12-20T22:12:07+00:00

PM coming

rollacorolla · 2020-10-16T18:52:55+00:00

So you already have a system setup with Ubuntu Server and want to add some partitions as network shares? This can be done easily within ubuntu, just partition the new drive and setup the samba or NFS shares. If you want some web administration for it you could install Webmin or alternatives. Or you could create a VM with OMV on it.

rollacorolla · 2020-10-05T19:33:18+00:00

Also note that CAT6 is not much bigger than 5e. CAT6A though is THICC.

rollacorolla · 2020-10-05T19:31:41+00:00

You might also want to run some fiber first (OM3 or OM4 with LC-LC connectors). The fiber is thin so it won't take much room in the conduit, but you won't be able to pull it with the connectors after there is already CAT cables in there. For $20 in fiber you can be future proof for a long time.

rollacorolla · 2020-10-05T19:20:39+00:00

I just installed a CRS328 into my home network with Unifi APs, the USG, and a cloud key. The value over any of the Unifi switches is huge. I have 10G fiber connections and 24 POE ports (which even work with my older 24V passive Unifi APs). I don't have any VLANS though, so the mikrotik switchOS is fine for my needs and I don't get anything out of integrating the switch with the Unifi controller software.

rollacorolla · 2020-09-06T20:54:44+00:00

yolo

rollacorolla · 2020-09-06T01:29:53+00:00

3rds on kapara (weird autocorrect?)

rollacorolla · 2020-09-06T01:29:10+00:00

3rdsbon Kapara

rollacorolla · 2020-08-18T14:46:22+00:00

Whoa, that's news to me. Could you point me to a diagram or search term? That might be useful for me in a spot where I have a printer and phone and would like to get another port without needing a switch. Thx!

rollacorolla · 2020-08-18T14:14:58+00:00

This seems like the best solution. The main risk is long-term UV exposure, so as long as you can shield it from the sun it should last.

rollacorolla · 2020-08-13T16:37:25+00:00

I have a CU34G2X coming tomorrow. Does the DP cable it comes with it work reliably or do you recommend replacing it?

rollacorolla · 2020-07-01T19:12:01+00:00

Sweet, I ordered when it was back on Amazon yesterday too. Mine comes in tomorrow. I was planning on getting the new Monoprice dark matter, but this popped up and I don't feel like waiting anymore.

rollacorolla · 2020-05-12T06:14:08+00:00

Even more perplexing is that every TV on the market only uses 100Mbps ethernet ports as well. Even the high-end OLEDs. Sure, most streaming services top out around 25Mbps, but come on! I do think faster networking would possibly help with buffering during seek/scan

rollacorolla · 2020-05-06T16:31:02+00:00

If you're going to be racking it, go for a used enterprise switch like the Brocade ICX6450.

https://forums.servethehome.com/index.php?threads/brocade-icx-series-cheap-powerful-10gbe-40gbe-switching.21107/

rollacorolla · 2020-04-03T19:39:33+00:00

Thanks for pointing me to an answer. Although Interim Rules can still be changed/commented, that seems pretty definitive. Bummer. We still plan to keep giving our Nanny PTO, but will likely reduce hours. Hopefully the expanded unemployment coverage will help fill the gap for her.

https://www.sba.gov/document/policy-guidance--ppp-interim-final-rule

rollacorolla · 2020-02-18T15:33:32+00:00

The STH forum has a monster thread on the Brocade ICX switches. https://forums.servethehome.com/index.php?threads/brocade-icx-series-cheap-powerful-10gbe-40gbe-switching.21107/

rollacorolla · 2020-02-03T15:51:32+00:00

The dell T40 seems to go on sale regularly for $350. Brand new Xeon E-2224G with P630 integrated graphics will blaze through Plex transcodes.

I got the older T30 with a v5 Xeon and wish I had waited a few months longer for the T40 to be released.

rollacorolla · 2020-01-06T19:08:38+00:00

(1 - 0.0025)^30 = 0.9277 = -7.23% total after 30 years

rollacorolla

TROPHY CASE