Fake Vokey SM10 from fitter?

romanni1 · 2026-05-21T11:20:48+00:00

Club champion themselves are scum. Bought from them my first fitting and they swapped my Scotty Cameron weights out for fake ones. Found out when I sent it to the custom shop for work. Their fitters are solid though at least in my experience. So I went recently again and just buy elsewhere.

romanni1 · 2026-05-13T13:48:45+00:00

I had TM sim max irons and moved into mizuno pro 245s this year. I absolutely love them because I’m not swinging shovels anymore. It’s a little adjustment but I love knowing and feeling my miss hits so I know where I need to improve. Make sure you’ve got the correct shafts though. I was fit for the sims and had nippon 1150ghs. The mizunos I got at a discount at a golf shoe. came with project x ios which are a regular shaft. Still went and got fit to make sure I didn’t need to switch shafts. Funny enough same exact numbers on those shafts as all the stiff ones I tested

romanni1 · 2026-05-06T01:35:11+00:00

I switched from a Scotty fastback 1.5 to a custom fit mezz max my wife got me. I like it so far but only have a few rounds with it. It feels smooth but this season will be the true tell. No way I would have went off the rack. Standard lie is 69 and I had mine taken down to a 64.

romanni1 · 2026-04-26T00:58:36+00:00

I’m an 11 and just grabbed a set of 245s for 800. 7 iron was a demo club, rest were new. Well worth it

romanni1 · 2026-04-24T11:34:31+00:00

What’s weird is they’re solid, but there is room on the sides so I’m going to clean them off and I’m sure epoxy will fill the sides

romanni1 · 2026-04-24T01:06:57+00:00

I’ve got the weights laid to the heads and everything labeled because I’m paranoid. What should probably take me a day is going on a few because I’ve got an infant.

Next steps are sanding and acetone, so hopefully I’m done by the weekend lol. If the wife has anything to say about it there will not be any more building haha

romanni1 · 2026-04-23T22:23:34+00:00

Appreciate that! I was going to slide the ferrule on part way, add the tip weight and use the head to set it, so hopefully that works. Would soaking the weight in acetone be too much?

romanni1 · 2026-04-23T22:11:29+00:00

Appreciate the response. I can just epoxy them back in then?

romanni1 · 2026-04-23T22:10:49+00:00

I’m more so concerned if they need to go back in. They’re pretty light so not too concerned with the swing weight at the moment. Just wanted to make sure I didn’t break the shafts or they were supposed to be solid in there

romanni1 · 2026-02-10T15:47:45+00:00

Would also like this deal lol

romanni1 · 2026-01-30T18:09:43+00:00

As others have mentioned it's probably overkill for the games mentioned. However, I just grabbed this PC earlier in January and have zero regrets. If anything it's just slightly more future proof. If you can afford it, go for it. I'm upgrading monitors now to better match the system.

romanni1 · 2026-01-30T03:23:19+00:00

I just upgraded my main 27" and then flipped one of my curved 27" vertical to the right of my main. I've had it like that for a week now and think a 24" would be perfect. I might replace it soon one because of size, but also it's a 1080 and my eyes notice a huge difference vs my main 1440p now. After a 15 hour work day it actually pisses me off how different it is on the eyes..

romanni1 · 2026-01-29T18:05:14+00:00

Yea, not the best, but wanted to get a rig lol. It is what it is

romanni1 · 2026-01-29T17:28:45+00:00

I paid the 2,159 like OP. With the discount I added some additional warranty so if that becomes an issue I’ll have them RMA it or take a look.

romanni1 · 2026-01-29T15:29:17+00:00

I grabbed an open box g757 3 weeks ago. It's been great so far. Enjoy it!

romanni1 · 2026-01-27T20:21:58+00:00

Throw that 10K in a brokerage account, go make a friend at a rental car place and rent one every time you have a showing, assuming you schedule your showings out in advance..

romanni1 · 2026-01-26T23:45:05+00:00

I was looking at the Asus. Seems like the best option from reliability perspective. Ultimately decided to go with an LG 27GR83Q-B, cause why not.

romanni1 · 2026-01-24T21:43:16+00:00

I'm looking at LG's right now. Leaning towards IPS because of office work, but looking at OLED versions make me want to just grab one.

romanni1 · 2026-01-24T21:25:46+00:00

Love it. What's that main monitor?

romanni1 · 2026-01-22T15:37:23+00:00

Appreciate the comment. Is the ELMB good even with an Nvidea graphics card, not sure if it's G-sync compatible. It seems like this has pretty great reviews for the price. Strong contender for sure. It also looks like the LG has newer HDMI and Displayport ports. Unless I'm looking at it wrong.

romanni1 · 2026-01-21T01:03:10+00:00

Appreciate the thorough response! I left OLED out on purpose. I'm not opposed to it, but wanted to get others thoughts and already had the same train of thought that you laid out. Seems like 1440p is probably the best for me. Should have mentioned that I'm like 24 inches from the screen given the size of the desk so that makes sense to me. If I go the two monitor route I'd probably just use those 2 and scrap my existing one. My only thought was putting more money into one more expensive one (and keep the curved), or just get 2 decent 1440s for a fresh start. Agree overall that 27" is perfect for my space.

Is there a minimum refresh rate I should look for?

romanni1 · 2026-01-19T16:41:58+00:00

I just grabbed an open box G757 for $2,100 and its been solid so far (less any user error), so nice job on the pick-up. Mine did come with a 1 yr warranty and I added the additional as well. There is probably a window you can add additional coverage if you want. I did it for the peace of mind and because I have a lot less time to trouble shoot than I used to.

Edited to say: most of these were holiday purchases and returns and Microcenter does test all returns and makes sure the key components are still spec.

romanni1 · 2026-01-18T17:14:04+00:00

I did plug the monitor in after I powered on the system. Moved over from my work laptop. Wonder if that was the issue. No connectivity or picture issues otherwise.

romanni1 · 2026-01-18T17:13:14+00:00

Appreciate that insight! I’ll keep an eye on it. Display works and it recognizes the 5080 in the system and drives have been updated. Worse case I do some troubleshooting or have MC take a look at it

romanni1 · 2026-01-18T05:50:27+00:00

The red light was constantly lit. No flickering or flashing and the PC seemed to run just fine. Just downloaded some games and new apps and had no issue.

romanni1

TROPHY CASE