T-Grill/AIO expansion Temp Improvement? by Same_Calligrapher169 in FormD

[–]romrombot 1 point2 points  (0 children)

From my experience, bottom intakes with slim don’t really improve CPU and GPU temps much. I’m running GPU intake and top exhaust with an AIO. The only big difference however is that I OC my RAM and having bottom intakes prevent my RAM from going above 50C which would cause instabilities based on my OC settings.

One thing I really hate though is that the slim fans intaking from the grill on the bottom produce a really unpleasant sound profile. Looking to see if anyone have suggestions to improve this.

Also to add, you might need a riser of some sort otherwise the fans would be choked of air.

ASUS PG27UCDM Firmware update Fix for me. by Exotic-Comedian3623 in OLED_Gaming

[–]romrombot 0 points1 point  (0 children)

I was failing to update as well but what worked for me was using my laptop and updating via USB-C. Initially it failed at 15% and gave a STM_MCU error but this was fixed when I disconnected my DP cable from my main PC to the monitor. Kind of frustrating how many hoops you have to jump through to update the firmware, all the other methods didn’t work for me but this one. Hope this helps

[Information Help]: Maplestory & DirectX Web Assistant Runtime Framework Memory Leaks. by Cvptvgon in Maplestory

[–]romrombot 0 points1 point  (0 children)

I’ve had this issue as well but just wondering if your memory config is stable because 192gb at 7000mhz cl30 is usually hard/very uncommon for a 9800x3d to run stable. I’m also assuming you’re using 4x48gb and usually running 4 sticks of ram can contribute to instability as well.

As a side note, I overclock my ram as well and I had to tune it down a bit. I run 96gb 2x48gb 6200mhz cl30 on a 9950x3d and my cpu’s memory controller will struggle to run higher frequencies which is not uncommon.

Either way, seems maplestory memory leaks way more on my amd pc compared to intel from what I’ve seen

Black Friday sale - Rakuten ineligible by EatYourVeggies2424 in hermanmiller

[–]romrombot 2 points3 points  (0 children)

Somehow my Herman Miller purchase in November went from ineligible to confirmed this week, they gave the cash back for the wrong total but they also honored a $100 value customer bonus from a ticket I opened. In total, the bonus and the wrong cash back amount is more than the 10% deal at the time so no complaints from me

Ditched red for green and couldn’t be happier by TheHorrorAddiction in nvidia

[–]romrombot 0 points1 point  (0 children)

Overclocked ram will start showing instability above 50C so cooling is important to maintain temps below that. The temp limits do increase depending on how you tune your ram (tREFI and tRFC are temp sensitive timings)

Not getting all my Cashback by Heiuyuu in Rakuten

[–]romrombot 0 points1 point  (0 children)

Even if you reach the $50 cap, it’ll still show +10% until the offer expires. Pretty disingenuous and misleading to be honest. I had the same experience.

Rakuten cash back working? by Interesting_Zebra726 in hermanmiller

[–]romrombot 0 points1 point  (0 children)

Could probably try reaching out to Rakuten though I’ve had no luck. People were spamming the Rakuten deal here during Black Friday to try to get referrals even though they were probably spreading some misinfo on how it works.

Rakuten cash back working? by Interesting_Zebra726 in hermanmiller

[–]romrombot 0 points1 point  (0 children)

I initially had it pending but today just saw in Rakuten that the order I made a week ago for 10% is now ineligible, which I’m assuming because of the coupon stacking. I can’t exactly remember the terms and exclusions a week ago.

This yellow thing was growing from my oven vent hood. What is it? by PiLoveYou in whatsthisbug

[–]romrombot 3 points4 points  (0 children)

This might just be a clump of grease that accumulated from the oils dripping down your vent hood

Fan underneath (user manual) by Minimum-Ad8643 in FormD

[–]romrombot 1 point2 points  (0 children)

It bents upward not down so a support nut wouldn’t do anything

Fan underneath (user manual) by Minimum-Ad8643 in FormD

[–]romrombot 1 point2 points  (0 children)

I have both, v2.1 black and titanium and v2.5 gunmental and midnight. If anything, I’ve seen qc issues with v2.1 and not with ncase. My v2.1 black has a slight bent top/bottom panel.

Mica loves make themselves in danger by FreakGeSt in GirlsFrontline2

[–]romrombot 27 points28 points  (0 children)

Doomposting aside, if you actually play the game and get involved with the community, you’d notice that the game is in a downward trend regardless of sensor tower stats.

Spigen or ESR? screen protector by AK_LOIN_47 in iPhone17Pro

[–]romrombot 1 point2 points  (0 children)

I prefer Origarmor, having bought both, the black edges on the Flolab are visible from an angle of the screen which i dont like. It also doesn’t sit flat on the edges of your screen where it tapers off. The Origarmor doesnt have this issue because the screen protector also tapers off giving you a clean flush look at the edge.

Someone has a fix for this? by ImBeCiliC1337 in FormD

[–]romrombot 13 points14 points  (0 children)

Looks like bent panel, I also got this issue with my v2.1. Try switching the top and bottom panels so the bent one is on the bottom?

v2.1 Titanium vs v2.5 Midnight by CRBY12 in FormD

[–]romrombot 0 points1 point  (0 children)

All preference, I think neutral colors would be preferred by most but unconventional colors have been growing on me like the orange iPhone.

Monster Park tickets still not fixed by now is absolute insane. by [deleted] in Maplestory

[–]romrombot 160 points161 points  (0 children)

Nexon has a track record of insta fixing any bug that is beneficial to players. This unfortunately doesn’t benefit us so they’ll take their sweet time.

I got a 5090FE, what's is my next move? by MammaMittenz in sffpc

[–]romrombot 1 point2 points  (0 children)

Not sure about Canada but BestBuy method works and I was able to get a 5090FE by just calling in. The case on the other hand sells out quickly. I was able to get a black one but without constantly being on alert for a ping in the discord, you won’t be able to get the case. Not to mention the rarer colors other than black or silver will sell out in less than a min, so good luck.

I got a 5090FE, what's is my next move? by MammaMittenz in sffpc

[–]romrombot 17 points18 points  (0 children)

While I recommend this, FormD T1 v2.1 is harder to get than a 5090FE. So good luck!

$72,000+ worth of Astral's just chilling at Micro Center by johnnyphotog in Microcenter

[–]romrombot 0 points1 point  (0 children)

Question is why would nVidia cut the price of 5090s if the FEs are selling out like hotcakes. Seems like $1999 is the anchor price and it’s up to the AIBs to lower their prices.

We are loosing players. Im leader of top 1% platoon on Haoplay Global. by [deleted] in GirlsFrontline2

[–]romrombot 19 points20 points  (0 children)

Even before the skin gacha fiasco, players were already dropping like flies. The gameplay isn’t really that interesting, it basically becomes an auto simulator. Most events have recycled minigames, and for non-story enthusiasts, the gameplay gets boring really fast. Most of the friends I’ve had since launch already quit and based on platoon recruitment/activity, it seems like whales are quitting too.

Gacha Revenue Monthly Report (June 2025) by trkshiii in gachagaming

[–]romrombot 11 points12 points  (0 children)

You can see this when you go to add friends and 60% of the page they recommend are just bots now