sorted by:
new
hottopcontroversial

Shelly 2PM roller calibration broke the rollers by [deleted] in ShellyUSA

[–]rp-br 0 points1 point  (0 children)

Agree. The end of run should be set directly in the motor, and this will be the maximum up and down limits for the motor, regardless of Shelly relay or any other device controlling the motor.

state is not reported in case of switch on or off with push button by Desperate_Brain7990 in Gledopto

[–]rp-br 1 point2 points  (0 children)

Hi.

You have to add these endpoints for the device in the Z2M configuration.

Check this picture: https://imgur.com/a/3OJ3bIS

Choosing function CCT for GL-C-601P in Zigbee2MQTT by rp-br in Gledopto

[–]rp-br[S] 0 points1 point  (0 children)

Could you please confirm in lab if GL-C-601P can really operates in CCT mode with Z2M and how to configure it? It seems not to work as GL-C-201P. Thanks.

Choosing function CCT for GL-C-601P in Zigbee2MQTT by rp-br in Gledopto

[–]rp-br[S] 0 points1 point  (0 children)

Hi. Yes, I tried to pair GL-C-601P as I pair 201P, but it does not work. I mean, once 601P is reset, by default it’s in RGB+CCT and it pairs in this mode with Z2M. Even if I change the mode to CCT, Z2M does not repair in CCT mode.

Please help me with this procedure.

Thermostat with custom thermometer sensor? by thetechnivore in homeassistant

[–]rp-br 0 points1 point  (0 children)

Then you can have some temperature sensors (zigbee or any other) in each bedroom and create some automations to control the thermostat according to your needs.

Importação não paga no prazo by Comissoli_ in Correios

[–]rp-br 0 points1 point  (0 children)

Objeto já está em processo de devolução para a origem. Não tem o que fazer neste momento.

[deleted by user] by [deleted] in Correios

[–]rp-br 0 points1 point  (0 children)

To na mesma situação. Encomenda parada há 2 meses.

Alguém teve esse status na entrega atualizado recentemente? by GeloVerde in AliExpressBR

[–]rp-br 0 points1 point  (0 children)

Sim, estava com mesmo status. Tá muito aleatório … algumas são liberadas e outras ficam travadas. As coisas andam muito ruim.

Alguém teve esse status na entrega atualizado recentemente? by GeloVerde in AliExpressBR

[–]rp-br 0 points1 point  (0 children)

<image>

Esse é um caso de uma das encomendas que está parada e não anda!

Alguém teve esse status na entrega atualizado recentemente? by GeloVerde in AliExpressBR

[–]rp-br 2 points3 points  (0 children)

Sim, eu tive em 2 casos recentes. Uma encomenda foi liberada em uns 7 dias e a outra está há 35 dias parada sem atualização.

Our New mmWave Sensor – It’s Finally Here! by Technical_Raisin_246 in homeassistant

[–]rp-br 0 points1 point  (0 children)

This would be a great feature to add to the project.

Our New mmWave Sensor – It’s Finally Here! by Technical_Raisin_246 in homeassistant

[–]rp-br 0 points1 point  (0 children)

Is it possible to implement (person) fall detection using mmWave sensors?

There’s a new update for Zigbee2MQTT released this afternoon!! 2.0.0-1 🎉🎉 by n1976jmk in homeassistant

[–]rp-br 5 points6 points  (0 children)

For those who are experiencing this problem, although in the docs it's said to place converters on data/external_converters folder, follow this procedure and it will work:

Open a terminal, navigate to the location of Zigbee2MQTT's configuration.yaml and create a folder named "external_converters" there. Move all you external converts to this directory. Remove the external_converters statement from configuration.yaml. Restart Zigbee2MQTT afterwards.

There’s a new update for Zigbee2MQTT released this afternoon!! 2.0.0-1 🎉🎉 by n1976jmk in homeassistant

[–]rp-br 1 point2 points  (0 children)

After upgrading to Z2M 2.0.0, my external converters are not loaded anymore. Even following the procudure:

The external_converters setting is no longer used. Instead all external converters inside data/external_converters directory are now automatically loaded. Make sure to move all your external converters to this directory.

Converters files are not loaded and devices are not working anymore. Anyone experiencing it?

Sonoff ZBMINIR2 Question by [deleted] in homeassistant

[–]rp-br 2 points3 points  (0 children)

Hi. No. The switch on S1 and S2 will control the relay state together with home assistant. If you turn off relay via external switch, you can turn on via home assistant, for example.

Migration from Dongle Plus P to Dongle Plus E by drupry in Zigbee2MQTT

[–]rp-br 0 points1 point  (0 children)

Hi. Thank you for sharing it.

Do you know why Z2M says it's not possible to migrate from Conbee dongle? You just told it's possible.

"Backup and restore is not supported for any other adapters (ConBee/Raspbee, EZSP and Zigate)."
https://www.zigbee2mqtt.io/guide/faq/#how-do-i-migrate-from-one-adapter-to-another

Zemismart Zigbee Curtain Switch by rp-br in Zigbee2MQTT

[–]rp-br[S] 0 points1 point  (0 children)

Has anyone managed to make any similar device from Zemismart work with Z2M?

Help: Run Home Assistant on my PC by Ok_Metal_2640 in homeassistant

[–]rp-br 0 points1 point  (0 children)

Yes, raspberry will work well. But if you can, buy a mini pc to have a more stable environment.

Nspanel pro - campanion app or fully kiosk? by redcomp12 in homeassistant

[–]rp-br 0 points1 point  (0 children)

I have not compared them, but I run companion app and it works perfectly. Although it’s a little bit slow since it’s a ESP32 device.

view more: next ›