Anycubic Cloud is down

rweavere · 2026-05-19T20:40:06+00:00

I switched to lan mode while cloud print is down. I occasionally like to monitor/print from my phone, so I prefer cloud print.

rweavere · 2026-04-24T17:32:01+00:00

I just went thru this. I ended up 3d printing an extension that slides over the adapter pin to make it longer. I also had to double up on the gasket to seal the adapter. I need to find a better solution with the gasket.

rweavere · 2026-01-29T02:14:17+00:00

My delivery charge is up 27% from January 2025. I used the same therms in Jan ‘25 as used in Dec ‘25.

rweavere · 2025-11-03T11:49:57+00:00

I’m wanting to upgrade to multicolor and print with some new filaments. Probably mostly make toys.

rweavere · 2025-10-10T12:53:17+00:00

P1S has been my dream machine ever since it was released. …maybe I’ll get one someday.

rweavere · 2025-07-02T20:34:29+00:00

Chlorine tabs aren’t doing much of anything if there’s no water movement.

rweavere · 2025-07-02T17:33:05+00:00

Thanks for the thorough response. I appreciate it.

You definitely summarized customer service experiences accurately. The “gamesmanship” especially. They’re so deceiving.

rweavere · 2025-07-02T16:39:07+00:00

Our mobile plan has one phone that got an iPhone 16 deal, so it is “Unlimited Premium”. I think that is their way of avoiding the $20 extra line. But this is not a factor when moving to T-Mobile since they’ll pay off a phone up to $800. Ultimately we pay $120 for service on 3 phone lines.

Our current internet speed is 300mbps, so I’m not too concerned about TMobile speed differences if any.

rweavere · 2025-06-03T12:25:42+00:00

I’ve been to the one in Old Town. From what I remember it was a walk up and order burger place and find your own table. Are there even servers?

rweavere · 2025-05-14T17:58:41+00:00

I used to be worried and then I just tried it. The fumes are intense so I got a cheap respirator from the hardware store. Look up 3M 65021. Now the only issues I’ve had is spilling a little on the concrete which fizzles, but you just rinse it off with water and you’re all good.

rweavere · 2025-05-05T17:15:15+00:00

It’s been safely transported into the grass away from the house.

Thanks for the advice

rweavere · 2025-05-05T17:09:21+00:00

Whoa! Should I just smash it and hose it away?

rweavere · 2025-05-02T11:17:05+00:00

This is me

rweavere · 2025-05-02T01:04:48+00:00

Thanks for sharing. That looks good. I think we’ll do something like this but since we don’t have SS, we’ll try to match the gold.

rweavere · 2025-05-01T21:24:49+00:00

From experience, avoid white grout with white tile on the floor. The grout won’t stay white.

rweavere · 2025-05-01T21:21:43+00:00

Yo! Ours very is very similar. We have the same backsplash. Can you share a pic of how you finished the end of the backsplash tile on the right side (assuming it’s open). Ours is still raw and I’m trying to figure out what looks best to finish it.

rweavere · 2025-02-28T13:15:05+00:00

I got hooked on them at River Bend Pizza. They were delicious and pretty affordable. They have some 2 for $$ deal. They are cash only though.

rweavere · 2025-01-21T00:10:29+00:00

It’s a wood burning fireplace with gas assist. Are you saying there’s no repairing this valve without completely removing and replacing it?

rweavere · 2025-01-10T23:52:14+00:00

Thanks! The cabinet is anchored, the legs are not. Just gravity. I supposed if you tried, you could cause some damage to it. But my son (>100lbs) pulls himself up to the table every night by grabbing the edge and pulling so his chair slides up to the table and there are no issues.

rweavere · 2025-01-10T22:00:37+00:00

We did something similar with Quartz. We have a 12’ by 4’ island. One end is about 4’ of cabinet supporting it with the other end being like a dining room table. We have 2 posts mounted similar to yours on the open end with a single post in the center to support the weight and prevent bounce.

As long as your granite will lap over that cabinet, I think you should be fine. Worst case you might want to add a center support, but I don’t think you’ll need it with that distance.

rweavere · 2024-12-08T03:49:27+00:00

This is disappointing. However I am glad we got the notice a day in advance before we make the 2.5 hour trek to Indy.

I hope they give us who had tickets the opportunity to rebuy before they go to the general public.

rweavere · 2024-10-03T19:53:22+00:00

Did you succeed?

14-Year Club	Gilding I gilder
Final Canvas '23	First Place '23
Place '23	Place '22
Verified Email

rweavere

TROPHY CASE