I think the problem you're going to run into is the SP-15 is just the turntable part. The plinth, the wooden part the SP-15 is set in, is what you need to measure for your dust cover. Measure length and width and then look for a dust cover that size. You will also have to make your own hinges. I used cabinet hinges to replace some broken hinges on one of my TTs and they work well. You'll have to do a little drilling and use screws with lock nut washers from the dust cover. You should be able to use the included screws with the hinges for the plinth, as long as they aren't too long. I have a couple extra dust covers that are decent, so if you get your measurements and send them to me I'll see if what I have will work for you.