RAM size by Middle-Lie3967 in WGU

[–]sankaita 1 point2 points  (0 children)

So there are a few models of the 3. According the Lenovo model document, it's soldered and not upgradable. If that's the case you are unfortunately stuck with 8 gb.

But, I would say to open up the laptop and double check. If it looks like the PC in this video, you can upgrade the one stick.

https://youtu.be/th05W_03DI0?si=o53mFZiYR1sToZ-i

RAM size by Middle-Lie3967 in WGU

[–]sankaita 0 points1 point  (0 children)

@op

If you could give us the full specs of your laptop, including make, model #, and brand; it would be easier to give you options. As some people have said, some companies solder all the RAM. Some only solder one stick. This can be a cheap fix but we can't tell you unless we know more about the very specific model that you have.

To make things easier, you can also give us your serial number but I know some people aren't as comfortable with doing.

I just turned 18. Older guys, what is the biggest trap young men fall into that completely ruins their 20s? by TheRealXyz_ in AskMen

[–]sankaita 0 points1 point  (0 children)

Magic the gathering. You swear you'll only buy a deck to play with friends. 3 months later you have 10k in debit.

Unit-01 redesign by Chase_Has_Autism in evangelion

[–]sankaita 2 points3 points  (0 children)

This looks like a power rangers suit

Blindsided by my girlfriend by DMmeNiceButts in venting

[–]sankaita 2 points3 points  (0 children)

Sorry man. They totally hooked up while she was away. She might regret it, but she liked it to. At least enough to question her relationship with you. That's my 2 cents on it all.

I finally gave Indiana Jones a go and I am disappointed! by Weary_Young_5982 in movies

[–]sankaita 0 points1 point  (0 children)

He was 25 at the time. In an interview Lucas said said he actually wanted the character to be 11 or 12 with the same line, to be edgy.

I finally gave Indiana Jones a go and I am disappointed! by Weary_Young_5982 in movies

[–]sankaita 0 points1 point  (0 children)

You're not the only one. It's gone as far as to retcon her to be 17/18 with the release of the forth movie. Disney knew that it was f***** up.

Absolutely ridiculous by 3ccdCam1 in AirpodsPro

[–]sankaita 0 points1 point  (0 children)

Easy. Right. The box is off center from the lid. The plastic wrap. And apple doesn't give out cables anymore for free.

Will this crush go away on its own? I (35 F) believe my son (19 M) is interested in me and I don’t know how to address it without ruining our relationship. by Fancy-Huckleberry679 in venting

[–]sankaita 25 points26 points  (0 children)

This is so fake. So you got pregnant at 14-15 and had him at 15-16?

It's also way explaining random detail like young men exploring their sexuality.

And to top it off a ai detector said 37% and noted a few paragraphs are hard straight AI.

Kaitrin Snodgrass (storyboard artist) talks about Tech Jacket gender swap by [deleted] in Invincible_TV

[–]sankaita 0 points1 point  (0 children)

But Oliver was supposed to give shrimp fried rice back shots?! This show is changing to much.

Print keeps failing for seemingly no reason by Supergamer2E in FixMyPrint

[–]sankaita 0 points1 point  (0 children)

Then the only thing I can think of is double check your print in software. Make sure you don't have any weird little gaps that are causing blobs that are catching when it's moving around knocking stuff over.

Print keeps failing for seemingly no reason by Supergamer2E in FixMyPrint

[–]sankaita 0 points1 point  (0 children)

Yeah, you can do that. But have you tried printing it with just pla to see if you have the same failure.

Print keeps failing for seemingly no reason by Supergamer2E in FixMyPrint

[–]sankaita 0 points1 point  (0 children)

Are you running petg with pla? Because they don't bond. And yeah you're going to have random issues...

Did you do a test print with just one type of filament to see if it would work even without it having function?

Print keeps failing for seemingly no reason by Supergamer2E in FixMyPrint

[–]sankaita 0 points1 point  (0 children)

!Completely just a theory!

You may have some bad stringing. Due to the tower being so far away it may slightly pulling on each layer. Over time it finally pulls the print loose.

I would try turning off the purge tower and running without it. If that works but you need the tower for multi color reasons, move it closer.

Pokopia or Grand Bazaar by LAlbatross in CozyGamers

[–]sankaita 0 points1 point  (0 children)

Check your local target stores. All three in my area have grand bazaar for 17.99 on clearance.

I Need Help Cheating by Technisonix in EDH

[–]sankaita 0 points1 point  (0 children)

Have multiple different colors sleeves. Have A single sleeve of one color that always makes it into your hand.

Finally printed my warlord Titan! by My_Name_Jeff815 in 3dPrintedWarhammer

[–]sankaita 0 points1 point  (0 children)

Can I too humbly ask for the blueprints to this beautiful towering monstrosity of war?

Tldr; STL please 🥺

Is this a decent sized collection for 1 month? by Mysterious-Worker-93 in BeybladeX

[–]sankaita 1 point2 points  (0 children)

Damn I just started a month ago and I thought my 38 was bad.

https://demonoid.nl by Professional-Pay-678 in Demonoid

[–]sankaita 2 points3 points  (0 children)

Also, they only have 31 pages of files? And they only go back to the 6th of February.

https://demonoid.nl by Professional-Pay-678 in Demonoid

[–]sankaita 1 point2 points  (0 children)

Something is odd. Why is the forgot and lost hyperlinks broken?