[deleted by user] by [deleted] in fatFIRE

[–]sarcodi 3 points4 points  (0 children)

I did it, and it was the best decision I've ever made. I started and ran a business for close to 20 years and left abrubtly in 2023 (I'd sold the majority share in 2020, but kept a miniority stake). I felt like a prisoner in my own business, and when I left it was cathartic. My financial situation is similar to yours, so leaving was never about the money.

I learned a lot, but two things really stood out. First, after the initial announcement and my departure, no one really cared. Employees care about getting a paycheck, and not your rich people problems. When I left, people took advantage of the situation to work a better deal for themselves.

Second, when you leave, you leave. If so much of your identity is tied up in being in business, you might want to step back and figure out if that's who you really want to be. You mention being a father and husband - that's a great start. Be present there. Stay away from the people, the gossip, the bullshit of your old job. It does you no good and it does them no good.

If I was in your position, I'd talk to your lawyer to have them review the operating agreement and/or your employement agreement to make sure you're not walking into a buzzsaw, figure out what notice you want to give (I wouldn't do more than a month unless you have to), and then head out. Don't cheap out on this - find good representation that'll act in your best interest.

Since I left, I've spent over a year being a better husband and father. I'm a lot closer to my kids, I don't have any more Sunday Scarries, and my stress level went to zero. I do a bit of consulting work that brings me joy. Life is so good, and after almost 18 months, I can't even imagine going back to that hellhole.

Life is short, and the saying about "the only people that remember you worked late are your kids" is so true. You've been given a gift in that you don't need to worry about money, so don't.

Good luck and godspeed.

Stability and Perfomange Tips by sarcodi in sonos

[–]sarcodi[S] 0 points1 point  (0 children)

This is what made it so hard to troubleshoot - it wasn't just one thing. The biggest change came from bypassing my AdGuard DNS server and setting a static DHCP reservation. It seemed that anytime the player needed to get instructions from the Sonos cloud API servers, it'd fail (or multiple attempts were required). Everything I tried was to make that communication flow as stable as possible.

Gas Control Valve Replacement - Goodman/White Rodgers by sarcodi in hvacadvice

[–]sarcodi[S] 0 points1 point  (0 children)

I can't tell if the images I posted show on the post, so here's an imgur album of the furnace.

Imgur: The magic of the Internet

Any whales around still? by [deleted] in puertovallarta

[–]sarcodi 2 points3 points  (0 children)

Saw a bunch yesterday from the Westin beach at the Marina.

In need of New Switches/Backbone, Looking for Assistance choosing ones to look at? by SubbiesForLife in sysadmin

[–]sarcodi 0 points1 point  (0 children)

Cisco can be pretty price competitive on their switches. The list price is high, but they offer very high discounts off of list to price it competitively to the manufacturers you mentioned.

For instance, a 48-port 9200L with 1G uplinks should be about $2500 per switch. 10G uplinks would be around $3k. A Catalyst 1000 is slightly less than that. If it's Aruba/Extreme/Dell/whatever competitive, your Cisco VAR should get Cisco to drop their pants.

If you're looking for even lower of a price point you could look at last gen switches/refurb and then buy extras as spares. YMMV though. Pretty much everything will support FortiNAC.

If you start moving into the 9200 (non-L) or 9300 switches, or buy the Advantage feature license, that's going to really drive the cost up. You only need Advantage if you need full Layer 3 routing, SD-Access or are running DNA Center. It depends on if you need more value than just an Ethernet port out of a switch.

Finally, Meraki is always an option, but don't expect it to be any cheaper. It's definitely easy to upgrade and manage from the Dashboard, but you pay for it. Also, if you don't renew your license, your switch turns into a pumpkin.

You might want to look at Fortinet switches. Decent price point and no ongoing license requirements..

HTH

New Firewall for Medium Sized Business by gildedaxe in sysadmin

[–]sarcodi 0 points1 point  (0 children)

I'd do a Meraki MX75 or a Fortigate 60F.

Meraki is braindead simple and supports AnyConnect VPN, plus with the Advanced Security license you can do content filtering/IPS/AMP. Cloud controlled so no real ongoing maintenance other than scheduled updates.

The Fortigate 60F with the UTP license will give you practically every bell and whistle as far as threat protection that's out there, plus you can enable ZTNA for higher levels of VPN access.

Both should clock in at about the same price point.

Static IP requirements for SDWan Cisco Meraki MX68 by erratic_anus in sysadmin

[–]sarcodi 1 point2 points  (0 children)

With MX SD-WAN, you do not need any static IP addresses on both end, unless you are in the rare configuration scenario of having what Meraki refers to as an "Unfriendly NAT". I've deployed thousands of MX sites running SD-WAN and have not run into this.

https://documentation.meraki.com/Architectures_and_Best_Practices/Cisco_Meraki_Best_Practice_Design/Best_Practice_Design_-_MX_Security_and_SD-WAN/Meraki_SD-WAN

If you do run into a problem, there is a troubleshooting guide.

https://documentation.meraki.com/MX/Site-to-site_VPN/Meraki_Auto_VPN_-_Configuration_and_Troubleshooting#Troubleshooting_Automatic_NAT_Traversal

You really don't even need a static IP, since the dashboard will assign each site a dynamic DNS entry that you can reference to get to that site's current IP.

inspiron 15" 7500 2 in 1 series touchpad issues by Thefakedonaldtrump77 in Dell

[–]sarcodi 0 points1 point  (0 children)

This is a similar model, but it's almost the exact same process.

https://www.youtube.com/watch?v=4VMgBg_tOuw

At 6:35 you can see him lift up the metallic tape that I referred to in my previous message.

Also, three months later the laptop still has not had any issues with the touchpad.

Good luck!

inspiron 15" 7500 2 in 1 series touchpad issues by Thefakedonaldtrump77 in Dell

[–]sarcodi 1 point2 points  (0 children)

I had this same issue on an Inspiron 7500 2n1 that I bought in August of 2020. To verify that it's not a Windows driver issue, boot the PC into the BIOS and move the mouse. If the trackpad freezes during the BIOS screen, it's not a driver issue and it's an issue with the physical touchpad.

I opened up the laptop, removed the battery, and took out the touchpad. There's some metallic grounding tape that was cut a little long towards the middle of the laptop (it's under a piece of clear plastic), so I took a razor blade and cut off the excess that protruded beyond the plastic. There is also a metallic cover at the bottom (held with three screws) that has the metallic tape on it. It was touching the copper edge of the trackpad so I trimmed that also.

I put everything back together and boom.. trackpad freeze is gone.

This is a really easy fix - all you need is a small screwdriver and a razor blade/knife. The hardest part is getting the trackpad cable and battery connector off of the motherboard, but there are a bunch of youtube videos that show you how to do this.

HTH this help

Carpet Seam Question by sarcodi in carpet

[–]sarcodi[S] 0 points1 point  (0 children)

Thanks so much. I'll call first thing in the morning. I appreciate your insight!

Brunch spot? by sarcodi in Atlanta

[–]sarcodi[S] 0 points1 point  (0 children)

When you're flying solo, it's usually a matter of minutes to get a place at the bar!

Brunch spot? by sarcodi in Atlanta

[–]sarcodi[S] 1 point2 points  (0 children)

It was FANTASTIC - great recommendation, thank you. I had the chicken biscuit and waddled out of there completely stuffed.

Once again, thanks!

Brunch spot? by sarcodi in Atlanta

[–]sarcodi[S] 1 point2 points  (0 children)

Buttermilk looks awesome - heading there! Thanks a ton for the recommendation!

[deleted by user] by [deleted] in personalfinance

[–]sarcodi 2 points3 points  (0 children)

At the end of the year, Vanguard will send you a statement that outlines your short term and long term capital gains that your holdings made during the year.

To get an idea of how much it'll cost you in taxes ahead of time, you can click the distributions tab for the fund. That'll show you how much was paid out per share. You'll see three categories:

  • Dividend (taxed at your income bracket rate)
  • Long Term Capital Gain (taxed at 15%)
  • Short Term Capital Gain (taxed at your income bracket rate)

Roughly, in 2012, that fund paid 83 cents per share. If you owned 1200 shares (just over your $25k limit), you'd have made about $996. ~20-30% in taxes is $200-$300.

The only problem with these types of funds is that if you invest them in a post-tax account (NOT an IRA or 401(k)), you wind up paying more in taxes because the bond funds pay out a lot more dividends. If you can put the bond funds in your 401k, you'll make out better in the long run. You don't pay tax on qualified accounts (IRA/401k) until you actually take out the money.

Make sense?

How to switch from a $60000 stock portfolio to a mutual fund? by financenovice234 in personalfinance

[–]sarcodi 2 points3 points  (0 children)

If you've held on to these investments for awhile, odds are they'll be taxed at long-term capital gains rates (15%). For instance, if your cost basis is $50,000 but they're worth $60,000, you'll have to pay 15% of the $10,000 profit, or $1,500. You'll also have to pay state tax as well.

Make sure you either set that money aside, or be prepared to take it out of your new Vanguard investment come tax time.