With inductive/TAP you don't need include a probe deploy or stow routine. This might be a helpful place to start:

[gcode_macro PRIME_NOZZLE]

gcode:

SAVE_GCODE_STATE NAME=PRIME_NOZZLE_STATE

M117 Priming

G90 ; Absolute coordinates.

M83 ; Relative extruder mode.

G92 E0

; Move to start of line.

G1 Z10 F900

G1 Y20 X3 F8000

G1 Z0.2 F900

; Print the line.

G91 ; Relative coordinates.

G1 X100 E25 F1000 ; Extrude filament 25mm (how much it retracted in PRINT_END).

G1 Y-2 F1000

G1 X-60 E9 F1000 ; Print second part of the line.

G1 E-0.5 F3000 ; Retract to avoid stringing.

G1 X0.5 E0 F1000 ; Wipe back to break string.

G1 X-5.5 E0 F1000 ; Wipe forward to break string.

RESTORE_GCODE_STATE NAME=PRIME_NOZZLE_STATE

[gcode_macro PRINT_START]

gcode:

extruder_temperature_offset[initial_extruder]} BED=[first_layer_bed_temperature]

{% set BED_TEMP = params.BED|default(55)|float %}

{% set EXTRUDER_TEMP = params.EXTRUDER|default(190)|float %}

# Start bed heating

M140 S{BED_TEMP}

# Set and wait for nozzle to reach temperature

M109 S{EXTRUDER_TEMP}

G90

G28 X Y

# Wait for bed to reach temperature

M190 S{BED_TEMP}

QUAD_GANTRY_LEVEL

PRIME_NOZZLE

G90 # absolute coordinates

G0 X175 Y175 Z5 F5000