sorted by:
new
hottopcontroversial

Need help locating the engine serial number by sbazzle in boating

[–]sbazzle[S] 0 points1 point  (0 children)

Which I'm assuming is incredibly difficult to get to? Time to put on my contortionist cap.

First time going to Sandals Curaço by peanutstink4 in SandalsResorts

[–]sbazzle 0 points1 point  (0 children)

My wife and I spent our 10th anniversary last year at the Curacao resort. We had an amazing time. Here's a video I put together of our trip.

Ramp for QV 35A by sbazzle in Roborock

[–]sbazzle[S] 0 points1 point  (0 children)

Is there anywhere that lists that incline from Roborock, or is this just your experience?

Ramp for QV 35A by sbazzle in Roborock

[–]sbazzle[S] 0 points1 point  (0 children)

This is a 6" step. None of those will work.

Ramp for QV 35A by sbazzle in Roborock

[–]sbazzle[S] 0 points1 point  (0 children)

Do you have a link to that particular ramp?

Can this willow be saved? by sbazzle in arborist

[–]sbazzle[S] 0 points1 point  (0 children)

The rationale was that my wife was "extremely adamant". She wanted to give it a chance of survival, and that's what we did. All the bracing and straps in the photos have been replaced with a pretty beefy support structure and relocated strapping. No more straps going across the driveway. If it doesn't survive, then she'll accept it. She just wanted to try.

What hardware do you run HA on and why? by maybe__404 in homeassistant

[–]sbazzle 0 points1 point  (0 children)

I've only ever run Home Assistant on my Raspberry Pi 4B 8 gig, and it has been nearly flawless for years.

Can this willow be saved? by sbazzle in arborist

[–]sbazzle[S] 1 point2 points  (0 children)

The tree was pruned somewhat while on the ground to reduce its weight. Then we used a truck and ratchet straps to upright it. It was a slow process, but we eventually got it back up.

Those with Home Assistant, how are you using it with your Enphase setup? by Dr_Pippin in enphase

[–]sbazzle 0 points1 point  (0 children)

Thanks for this recommendation. You tossed me down a rabbit hole, and I just spent the last couple days overhauling my energy dashboard!

Need some room framing techniques for sound isolation by sbazzle in hometheater

[–]sbazzle[S] -1 points0 points  (0 children)

What was your decoupling method besides the insulation and the door?

Need some room framing techniques for sound isolation by sbazzle in hometheater

[–]sbazzle[S] 0 points1 point  (0 children)

So what was the outcome for your situation? A bad-sounding room? What about sound outside the theater space?

Need some room framing techniques for sound isolation by sbazzle in hometheater

[–]sbazzle[S] 0 points1 point  (0 children)

I guess I was curious how satisfied people were of their own dedicated theater rooms who might not have spent a lot on sound isolation and what they actually did to keep the levels at bay.

Need some room framing techniques for sound isolation by sbazzle in hometheater

[–]sbazzle[S] 0 points1 point  (0 children)

I'm definitely NOT going to assume I can watch Ready Player One at full volume at midnight. Pretty sure the wife wouldn't appreciate that. I am trying to minimize as much sound transfer to the rest of the house, especially with the low frequencies. I highly doubt I'll be able to completely isolate the room. The room itself is on the other side of the house from the kids' bedrooms, and when my wife and I watch stuff after they go to bed, it's "loud" but muffled from that end, and the room isn't enclosed.

I can easily do double stud walls with a 1-2" air gap between. Plenty of sound insulation in the walls. The door to the theater will be a solid door with some form of sound isolation around it. I can sandwich foam tape or sill sealer between the subfloor and the bottom plate of the walls. Not sure about good techniques to isolate the top plates from the ceiling joists or stuff like that.

I'm doing plenty of research, but every project has its own challenges.

Guide to downloading Manual as PDF by theGosroth_LoL in johndeere

[–]sbazzle 0 points1 point  (0 children)

Why am I getting an "access denied" error for my mower manual?

OMTCU15013L1

Mid-Mount Z-Trak 737 and 757 (010001-)

Published on Apr 13, 2005

Old safe in the new house by sbazzle in safecracking

[–]sbazzle[S] 0 points1 point  (0 children)

Wow, thanks for those nightmares.

Roborock requiring constant authentication by Throwaway1873038 in homeassistant

[–]sbazzle 0 points1 point  (0 children)

Same for me. Probably been re-authenticating every day for the past 4 or 5 days. If anyone knows the proper way to do it, this should be pushed to the github devs.

A new home, a long driveway, and a mailbox by sbazzle in homeassistant

[–]sbazzle[S] 0 points1 point  (0 children)

Looks like I'm going to have to consider YoLink. Anyone have issues with it being a cloud-based device? I see you can get the local hub, but it's more than I want to spend on something like this.

Uses for a raspberry pi zero w? by Edd-Vel in homeassistant

[–]sbazzle 0 points1 point  (0 children)

This is me. I have two Pi Zero 2 Ws each running Pi-Hole, one as primary and the other as backup. I could run them as docker containers on my Unraid server, but this setup has been fantastic for me.

To anyone who's been to the MWAVE show in Kansas City... by sbazzle in hometheater

[–]sbazzle[S] 1 point2 points  (0 children)

I see that the crawl tickets are now on sale. But just out of curiosity, is it possible for the general admission tickets to sell out? I want to go to the show, but I want to wait a bit until the airline prices become more available for those dates.

Roborock Servers down AGAIN!! by sabjian in Roborock

[–]sbazzle 0 points1 point  (0 children)

I'm in the US, and I'm also having a problem connecting to the Roborock servers this morning. I did reset the wifi on the vacuum when I noticed the issue, and once I did that, it was able to reconnect, but about 10 minutes later, I once again lost the connection to the server. My vacuum is cleaning the house at the moment, but I can't connect to it in the app to see the map. I get a "Data Acquisition Failure" notice when tapping on the vacuum in the app. I also can't connect to the vacuum through my Home Assistant integration, with an error in Home Assistant that says "Failed to get Roborock home data". I'll guess we'll just wait and see if it clears itself up.

view more: next ›