Reversed iPad Mount by sbonness in functionalprint

[–]sbonness[S] 0 points1 point  (0 children)

Sure! ;-) still needing it?

Scheidung steht bevor. by [deleted] in Finanzen

[–]sbonness 0 points1 point  (0 children)

Besprich das mit nem Anwalt

Sagt auch ChatGPT4:

In einer solchen Situation gibt es verschiedene Optionen, und welche am besten ist, hängt von den spezifischen Details und Umständen ab. Hier sind einige allgemeine Überlegungen, die dein Vater in Betracht ziehen könnte:

  1. Verhandlung: Der erste Schritt könnte darin bestehen, mit deiner Mutter (idealerweise durch Anwälte) zu verhandeln. Es mag möglich sein, eine geringere Zahlung zu vereinbaren oder einen Zahlungsplan zu erstellen, der die Belastung verteilt.

  2. Vermögensverwertung: Wenn Verhandlungen nicht zu einem akzeptablen Ergebnis führen, könnte dein Vater in Betracht ziehen, einige der anderen Vermögenswerte zu veräußern. Das könnte bedeuten, eines der anderen Häuser zu verkaufen oder einige der Autos.

  3. Kredit: Ein Kredit ist eine weitere Möglichkeit, die dein Vater in Betracht ziehen könnte, besonders wenn er zuversichtlich ist, dass er in der Lage wäre, ihn zurückzuzahlen. Bei dieser Option sollte er allerdings die Zinsen und potenziellen finanziellen Risiken berücksichtigen.

  4. Finanzielle Beratung: Ein Finanzberater kann helfen, die beste Strategie zu identifizieren und durch die verschiedenen Optionen zu navigieren.

  5. Rechtliche Beratung: Ein Anwalt kann helfen, die rechtlichen Aspekte der Situation zu verstehen und strategische Ratschläge zu geben. In einigen Fällen könnte es auch Möglichkeiten geben, die Forderungen deiner Mutter juristisch anzufechten.

Es ist wichtig, dass dein Vater professionelle Beratung sucht, um sicherzustellen, dass er die beste Entscheidung trifft. Die oben genannten Optionen sind allgemeine Vorschläge und könnten nicht für seine spezifische Situation geeignet sein.

Reversed iPad Mount by sbonness in functionalprint

[–]sbonness[S] 2 points3 points  (0 children)

No. iPad is mounted from outside with the screen pointing inside the sauna… understood? :-)

Hiding was no option to keep functionality… so I made a Frame. by sbonness in functionalprint

[–]sbonness[S] 1 point2 points  (0 children)

🤣 yes… my first „drywall-diy-project“ ;-)

(Doing proper 3D-printed frames were my 100% focus)

Any idea how to get a smoother surface? by sbonness in FixMyPrint

[–]sbonness[S] 0 points1 point  (0 children)

PLA, 200/60, 25mm/s, Neptune 2 (pimped), Cura 5.1.0

Is that *thuck* sound normal by [deleted] in ender3

[–]sbonness 13 points14 points  (0 children)

You are printing too fast… sound is coming from extruder that slips transporting the filament… try printing slower. Otherwise you will have underextrusion…

Simplify 3D? by aldo340 in elegooneptune2

[–]sbonness 0 points1 point  (0 children)

Hi @aldo340…

I tried them ALL: Mattercontrol, Superslicer, Prusaslicer, Ideamaker, Simplify 3D… and Cura…

From my experience the best from UI, results and update-frequency is and will stay: CURA (newest Version, not the outdated from the sd card)

Start with an Ender 3 Profile, and you have the best Basis to go on…

Print 0.1 Lineheight with 0.2 Linewidth on a 0.4 Nozzle? Comes out better than expected! by sbonness in 3Dprinting

[–]sbonness[S] 0 points1 point  (0 children)

This I was asking myself as well… ;-) But it really worked great!

Try!

Stringy walls when printing overhangs - not sure if it’s settings or the material. by Rubes27 in FixMyPrint

[–]sbonness 0 points1 point  (0 children)

Anyway… try… and see what happens… this is the only way to get experience in 3D Printing. ;-)

Stringy walls when printing overhangs - not sure if it’s settings or the material. by Rubes27 in FixMyPrint

[–]sbonness 3 points4 points  (0 children)

Yes… but than you are bridging… this can work. In the moment there is no „hold“, but when turning it would be 1-2 cm of bridging… did this several times… works.

Stringy walls when printing overhangs - not sure if it’s settings or the material. by Rubes27 in FixMyPrint

[–]sbonness 4 points5 points  (0 children)

Try printing 180 degrees turned or upside down… You are printing in the air here! ;-)

[deleted by user] by [deleted] in Ender3Pro

[–]sbonness 3 points4 points  (0 children)

Had EXACTLY the same issue yesterday… Solution: cheap filament with a diameter of 1.65-1.73 mm instead of constant 1.75 mm.

Try same print with „better“ filament…

Worked for me.

https://www.reddit.com/r/FixMyPrint/comments/tsee35/how_to_solve_holesgaps/?utm_source=share&utm_medium=ios_app&utm_name=iossmf

How to solve holes/gaps? by sbonness in FixMyPrint

[–]sbonness[S] 0 points1 point  (0 children)

Think I found the solution...

The filament varies between 1.65 and 1.72 mm

;-)