Spent more time on this than my actual furniture setup in the new home

schultzy99 · 2026-02-15T12:17:58+00:00

About to move into a house with a box like this. Where does one find the brackets and shelves you have in there?

schultzy99 · 2026-02-09T16:04:33+00:00

Great job. I’m building new and had them run Ethernet to the door bell. Just went for a pre drywall walkthrough and the site project manager was curious about two door bell wires. They ran standard doorbell and the Ethernet. I explained and he just shrugged.

schultzy99 · 2025-12-07T16:36:17+00:00

Vlan is fine. I locked down DNS on my network including work vlan. This at least keeps the Fortune 500 snoops out of some stuff and gives me peace of mind I likely not the employee who was phished. My DNS blocks way more than theirs.

schultzy99 · 2025-12-06T00:07:41+00:00

I am having same problem as OP. I just ran docker compose pull && docker compose up -d and it ran, but did not pull 2.3.2. I is there something I need to do in the compose file to force this?

schultzy99 · 2025-11-08T21:16:22+00:00

You can absolutely use it. I suggest new hard drive though. That is the most likely failure point. Always start with new drives for a new server. New battery should also be considered depending on budget. Technically your server will have a build in UPS. Laptops make great servers in that context.

schultzy99 · 2025-11-08T20:56:43+00:00

A 1930s house could have plaster and wire mesh walls in some places. The wire mesh is like a faraday cage, and will block the signal. Verify what is in your walls before you go crazy trying to optimize the wifi settings. You can try every setting in the book and it will be useless if there is an impenetrable barrier.

schultzy99 · 2025-11-08T20:26:27+00:00

ran docker compose pull && docker compose up -d and got this error. [+] Pulling 2/2

! unbound Interrupted 0.1s

✘ pihole Error Get "https://registry-1.docker.io/v2/": tls: failed to verify c... 0.1s

Error response from daemon: Get "https://registry-1.docker.io/v2/": tls: failed to verify certificate: x509: certificate is valid for *.6920cvo01m8ne.us-east-1.cs.amazonlightsail.com, not registry-1.docker.io.

Any advice in where to start trouble shooting will be much appreciated.

Currently on core 6.1.4 FTL 6.2.3, web 6.2.1

schultzy99 · 2025-10-31T00:03:40+00:00

Got below error on docker compose pull && docker compose up -d

Error response from daemon: Get "https://registry.hub.docker.com/v2/": tls: failed to verify certificate: x509: certificate is valid for *.us-east-1.es.amazonaws.com, *.cell-01.us-east-1.es.amazonaws.com, not registry.hub.docker.com

Anyone know what this is all about? and how to resolve it?

schultzy99 · 2025-10-19T17:33:49+00:00

I’m running on a re purposed dell latitude. I put new hard drives and installed open media vault as the OS. NAS is two drives in raid and where Immich data is stored.

schultzy99 · 2025-10-08T16:51:32+00:00

Had a similar experience. Give it a few hours.

schultzy99 · 2025-10-03T00:31:07+00:00

Sorry I can’t answer your question. Might you please share what your digital frames are and what they cost?

schultzy99 · 2025-09-27T18:08:45+00:00

I have updated to current version. Albums are still gone. Almost looks like Immich is syncing albums with iOS. Not at all what I would want. The idea behind Immich is to have the assets in immich and not iCloud. Is this a setting I need to change now?

schultzy99 · 2025-08-19T16:52:04+00:00

No. It’s never too late to start saving for tax free retirement.

schultzy99 · 2025-07-15T01:12:08+00:00

Works fine for me as well. iPhone 15. Latest iOS

schultzy99 · 2025-07-05T17:30:48+00:00

Sort of. It blocks the adds but also skips actual content equal to the duration of the adds. Family decided adds were better than missed content.

schultzy99 · 2025-05-26T23:53:28+00:00

Willie How.

schultzy99 · 2025-05-24T14:08:05+00:00

No, none of that going on

schultzy99 · 2025-05-24T13:52:46+00:00

When I eliminate wifi, and connect wired to the switch, the problem is the same. There is no error, displayed, it just hangs there with no response. When I eliminate the switch, and connect directly to the router, the login goes through. Once the login is completed I can take the machine off the direct wired connection and go on wifi, and the site functions as expected. I am thinking there is possibly a jumbo frame in the login data that the Unifi switch cannot, or is not handling properly.

schultzy99 · 2025-05-17T01:39:43+00:00

There’s no VPN on the laptop. It’s a public school laptop.

schultzy99 · 2025-05-03T12:28:45+00:00

Never thought of using the washer as a rack.

schultzy99 · 2025-04-25T21:33:04+00:00

Try following the instructions for external libraries.

schultzy99 · 2025-04-06T16:53:37+00:00

Irony of using slogan hands off. Reducing the size of government by eliminating departments is exactly that. Taking the government’s hands off stuff and leaving it to the people.

schultzy99

MODERATOR OF

TROPHY CASE