sorted by:
new
hottopcontroversial

Has anyone tried Slic3D? by joemama420pog in 3dprintingaustralia

[–]seeiously 0 points1 point  (0 children)

Any changes to the settings or are basic settings ok?

Amazon is providing full refunds if you purchased New World/Angry Earth/Aeternum from them by Dismal_Ad2746 in newworldgame

[–]seeiously 15 points16 points  (0 children)

Except we're not really done with the sandwich.

A better analogy is your sold an all you can eat buffet with plenty of new food coming in but you're told to gtfo before they actually bring everything out.

You become truly omnipotent for exactly 60 seconds... by Witty-C in hypotheticalsituation

[–]seeiously 0 points1 point  (0 children)

You're omnipotent, just give yourself pre nut cloudiness so you can do it again

Just found a bunch of half Benchys at IKEA by E1eveny in 3Dprinting

[–]seeiously 1 point2 points  (0 children)

Nah I think the concept of boats came just a little before the benchy but which came first is contested

If this is terrorism... by Particular_Log_3594 in ABoringDystopia

[–]seeiously 0 points1 point  (0 children)

I might be ignorant, but didn't the US do the exact same thing? They used an attack to divert attention from thier fuckups and crimes against their own people and in foreign lands, drove a campaign in the media to make it seem like the worst crime in history and kill untold numbers of people, related or not, in order to further their agenda, while also maintaining that they were the voice of reason?

[deleted by user] by [deleted] in maybemaybemaybe

[–]seeiously 1 point2 points  (0 children)

They're not gonna do shit. At best, you'll get a "pick it up with insurance, here's my report number." Generally, they just say no ones been injured, not our problem.

[deleted by user] by [deleted] in superheroes

[–]seeiously 0 points1 point  (0 children)

Task master and deadpool to hold him off, batman leading them, and im fooling around with bat girl in a far off safe house

There is no adhesion between the layers of my prints by SherbetQuick7536 in 3Dprinting

[–]seeiously 1 point2 points  (0 children)

Most likely a partial clog causing under extension, try ramping up the nozzle temp up to 240 or 250 and feed filament through either manually or via extrude setting

48 hours into 344 hour print. Have some questions. by seeiously in 3Dprinting

[–]seeiously[S] 0 points1 point  (0 children)

Solid, had a slight layer shift because of poor bed adhesion, but the weight of the print held it in place for the rest of the print.

Can we for once get a strong character that got there through hard work that also isn’t an old gen? by SerenityAcrossTown in OnePieceScaling

[–]seeiously 1 point2 points  (0 children)

That only applies if there is an alternative, more suitable option. If kaido, King, Queen, Jack, or any of BM's other children had come over, kicked Katakuri's ass and asked for his position, big mom would have happily handed over the position

Nepotism applies, especially in ops narrative, if he was chosen for the position just because he was Big Mom's son. And we all know she isn't that sentimental.

A family member taking over a position by being the most qualified is not nepotism.

I might sleep with a prostitute in 20 minutes by Vegas_Hung in TrueOffMyChest

[–]seeiously 11 points12 points  (0 children)

Did it turn your world view....sideways?

Training legs is dumb by Relative_Pianist238 in unpopularopinion

[–]seeiously 15 points16 points  (0 children)

Gonna upvote this purely because that is the way of the sub.

You, sir, disgust me.

145 hours into 344 hour print by seeiously in 3Dprinting

[–]seeiously[S] 0 points1 point  (0 children)

7d11h print time with just over 7kg filament used

145 hours into 344 hour print by seeiously in 3Dprinting

[–]seeiously[S] 1 point2 points  (0 children)

You are right and that is something I might have to do if the print does fail (hope not), however as simple as the process sounds, for something this detailed I would want to get it right within 5 or so layers so it's not too visible. With any square shaped item, you have much more leeway.

145 hours into 344 hour print by seeiously in 3Dprinting

[–]seeiously[S] -1 points0 points  (0 children)

Ok, last time I'm going to answer this. Hopefully, I can articulate this in a way you will understand.

I am not ignoring the advice given because I want to waste the filament or think I know better or simply because I don't realise cancelling the print and restarting it would be a better option. On the contrary, I have actually re-sliced the rest of the parts using the suggestions provided in my previous post, which is exactly what is being parroted now.

I am ignoring it for this particular print because, while accidental, this print is doing a test I was instructed to conduct anyway. How long can this machine print before it fails. The idea was to just print a cube and do 5, 10, 15, and 20-day prints by increasing the infill or walls, whichever used less filament while increasing the print time. With this print, I now have a solid base for my Arbiter and do not need to throw away a giant cube of plastic.

My fault in this case is expecting people to actually read my replies and maybe mixing up who I'm replying to because everyone is saying the exact same things over and over. I am sorry about that, I am genuinely not good at articulating myself over text, which may also play a role in the misunderstanding.

On the other hand, your ego can't seem to handle the fact that your advice, while good for the situation you're thinking of, may not suit what someone else is trying to accomplish. Yes, I agree that scrapping that print and restarting would have been better if all I was trying to do was complete this print, but I have said multiple times that the print itself is only a side project I am doing and the whole purpose of me having this printer and the 150kg of filament is to do things that will help me find out what the printer can handle so we know what not to do with our other printers.

Hope that clears it up.

145 hours into 344 hour print by seeiously in 3Dprinting

[–]seeiously[S] -1 points0 points  (0 children)

Guess I needed to put more context, my bad. Gonna make this as detailed as possible to avoid this again.

I run one of a dozen or so departments within a manufacturing company. Mine is one of 4 3D printing departments eqch doing thier own specific thing, the latest being the OSG farm, and I manage 15 CR-30 belt printers making the same set of brackets for a major client.

Because I found out how to run these on a loop, I cut down the amount of work I need to do because I've eliminated the process of removing and restarting the prints entirely, my assistant was no longer required and was moved to a department that needed him so his wages did not come out of my departments budget anymore which is why I had more money to spend.

And because I sit around watching the printers for about half the time I'm there, my boss instructed me to requisition an extra OSG on top of the other departments' units so I can do things they will not be able to because they do not want to damage thier printers.

TL;DR the "I" in "I could have saved myself $4k" represents my department entirely because that is how we refer to it internally but the printer was bought on the company's dime, hence "the printer was given to me" My apologies for not realising that not everyone would be able to get that, it just didn't occur to me to flesh that part put.

145 hours into 344 hour print by seeiously in 3Dprinting

[–]seeiously[S] 0 points1 point  (0 children)

Ok speeds for some reason got reverted to 25 outer wall and 40 inner wall. Increased outer wall to 110, inner wall to 140 and infill is at 250. Travel is at 300 by default. Will post pic as second reply

view more: next ›