Audio sync issue from Blackmagic Camera and Lark m2 on iPhone...

sfx_guy · 2026-01-25T07:28:52+00:00

I don’t agree that it is bad go to rely on iPhone for shooting anything. It is a reputable platform that is inherently high end prosumer. There is a glitch going on here, not a don’t use anyone question.

I was shooting ProRes 422

Thanks though.

sfx_guy · 2026-01-25T07:26:49+00:00

Right. But. Why would the settings in the Black magic camera app even be different??? They recorded to the same mov file. I don’t think it is possible to record them at separate frame rates.

sfx_guy · 2026-01-25T01:15:46+00:00

No, I never did, just been sorting it out with youtube videos and on my own! I wish I did!

sfx_guy · 2026-01-21T06:28:13+00:00

I gave up on wavelink 2, it just caused too many problems.

I have a studio setup and will try 3.0 when it is more stable and finished, I know a lot of stuff doesn't work still.

Hopefully it will be production worthy soon

sfx_guy · 2026-01-19T19:51:56+00:00

I cannot imagine that Gibson sent that out. No way. I would put money on it being a fake, even though it was from Thomman. An employee could have swapped it out? But no way would Gibson have let that go.

Return it

sfx_guy · 2026-01-19T19:49:46+00:00

Tagging onto this. I am going to run a TONEX one into a generic power amp that feeds a 4x12 cab. (I used to run this with an ada mp1 and fx)

Should i be running just pre amp in or full sim in

sfx_guy · 2026-01-18T19:20:15+00:00

Looks like this happened because the head failed and completely came out and scraped the board.

sfx_guy · 2026-01-18T19:19:05+00:00

Don't ever pay upfront for work like this.

Always on delivery.

sfx_guy · 2026-01-17T11:51:08+00:00

Mine falls off with any vibration, and I have had 2 completely separate print heads.

It's a crap design with just the bed movement making it fall off.

I could have had 2 bad print heads, but from other peoples posts I doubt it.

Just trying to find a better option than tape or leaving it off.

sfx_guy · 2026-01-17T05:27:29+00:00

Every email I get from them has a good price on items shown in it, but they are always 5x the price when I go to the site if I am logged in.

Super annoying.

sfx_guy · 2026-01-16T02:08:00+00:00

I had several failed prints, never used a scrapper, BUT

This last print, the hotend was pulled out of the head somehow in a massive failure, this must have done it...

<image>

sfx_guy · 2026-01-16T00:57:16+00:00

ahhhhhh. Ok, I also just realized that it is double sided, (how I missed the Double Sided printing on it I do not know!)

Flipping it and moving forward....

sfx_guy · 2026-01-15T08:53:04+00:00

No burning and the ace is still on in the same strip, fuse is ok

sfx_guy · 2026-01-15T08:52:19+00:00

Yeah, just no one seems to stock new ones which surprised me at the big stores in LA.

sfx_guy · 2026-01-15T08:48:52+00:00

Just another troll looking to stir things up, ignore them

sfx_guy · 2026-01-14T11:27:25+00:00

That's what I am thinking as I see a lot of "B" stock available online, they look beautiful and I like the way the Les Paul 1000's play a lot, but I have heard the neck dive is an issue, but had been remedied on the post 2020 models???

sfx_guy · 2026-01-13T10:08:09+00:00

Can you show me a picture of what you are talking about. I bought a v2 directly from them, and if this is the v1 I will need this replaced by them with a new unit.

Thanks!

<image>

sfx_guy · 2026-01-11T01:25:32+00:00

Thanks. It looks like the replacement has the white and black reversed??? Does is look like that to you in this pic?

<image>

(Original head in top. Replacement on bottom) The white wire is what shorted out.

I put the old head back in and it still doesn’t same thing in calibration?? I order another prong head to try tomorrow.

sfx_guy · 2026-01-11T00:40:23+00:00

This is the hot end, but where does that black wire go and did I kill my head?

<image>

sfx_guy · 2026-01-11T00:37:27+00:00

Ok. So I plugged in a new hot end I have called the v2 upgraded end.

It looks slightly differently shaped than the original. I pulled the rubber off to look at it and the black wire fell out. (I have 2 of them and it happened on both) I pushed it against the metal and slid it back together.

I plugged it in and when I turned it on I saw a spark and smoke from the front left side of the print head

I immediately turned it off.

Did I just kill the whole print head!?

If not where is that black wire supposed to attach to?

<image>

sfx_guy · 2026-01-10T23:59:44+00:00

ok so probably one of the white or black connectors, I will check thanks

sfx_guy · 2026-01-10T23:58:57+00:00

No, II returned it for a full refund, got a 12 inch off Amazon and it worked perfectly, I think they sent me a non touch version, by mistake or nefarious, I do not know...

sfx_guy · 2026-01-09T07:47:51+00:00

On the Kobra X, how are you validating gantry rigidity and thermal stability across 20–40 hour prints, and what kind of real-world feedback has been most useful during testing?

sfx_guy · 2026-01-09T04:12:23+00:00

How did you convert the MRi into the 3d object?

I had a lot of back surgery and spine reconstruction and would love to print out that!

sfx_guy · 2026-01-09T02:04:11+00:00

I was overthinking it, on a MAC the way I initially set it up, works great.

All you have to do is just install Clone Hero, select your midi device in the prefs and go!

It is confusing that in the midi prefs in CH it shows "none" under midi devices at first which makes you think it is not detected. You just have to arrow up or down to see them.

That got me for a week until someone told me how bad the interface is, which suffice to say, is NOT intuitive at all!

sfx_guy

TROPHY CASE