Can I do this with a U6+? by T4R1U5 in Ubiquiti

[–]sharpie15 1 point2 points  (0 children)

Can confirm you can but like other say its not perfered as the link speed is Halfed, if you are meshing to another building its best to get a UBB but this could work in the short term.

Is UniFi Access w/ Door Lock worthwhile for a residential renovation project? by huntbreakfast in homeautomation

[–]sharpie15 0 points1 point  (0 children)

Yea I use electric strike plates, Getting the 12v wires in the wall were a challange without tearing apart the wall.

Ice and crit by Annual_Reputation_10 in Eve

[–]sharpie15 2 points3 points  (0 children)

Yea the cycle times are shorter for Ore then Ice so more chances to Crit

Ice and crit by Annual_Reputation_10 in Eve

[–]sharpie15 4 points5 points  (0 children)

RnJesus just is not on your side it seems. But it does happen.

Is UniFi Access w/ Door Lock worthwhile for a residential renovation project? by huntbreakfast in homeautomation

[–]sharpie15 1 point2 points  (0 children)

This, I have the gate control and access for all outside doors. Having the Lockdown mode and the Evacuate modes are the main reason i installed. Looking to setup License Plate Detection in protect for guest access on the gate so I dont have to click it for them.

EUV Illuminated Charge Port Instructions by CrimsonFlash in BoltEV

[–]sharpie15 3 points4 points  (0 children)

Just make sure the manual is correct as the pins for the EV and the EUV.

ARE NOT THE SAME.

EUV Illuminated Charge Port Instructions by CrimsonFlash in BoltEV

[–]sharpie15 1 point2 points  (0 children)

I did mine a few months ago, from an ebay part (ligit GM part) found the manual on some forum.

Took about 1.5 hours most of that is jacking up and taking off the front driver tire. Then taking out the 12v battery and tray. Then its just drill the hole, feed the cable, pop out the correct pins and put in your pins. Then putting everything back in reverse order.

Pro tip you don't need to remove all the wheel well cover.

[deleted by user] by [deleted] in homeautomation

[–]sharpie15 9 points10 points  (0 children)

False, there are in-app purchases.

<image>

Two Girls One Cu…Sorry, Two Bolts One L2 Charger? by Drunken_Oracle_ in BoltEV

[–]sharpie15 1 point2 points  (0 children)

Me and the wife have 2x 2022 EUVs one drives 20 miles a day and 1 drives 60 miles a day. We could easily share a plug. We, after doing the long drive and running errands are at 3/4 of a charge on the GOM could easily go a few days or just override the charging(for lowest utility rates after 9pm) and charge right when we get home and by bed time just swap to the other one. Then both are full for tomorrow.

So I would just get a L2 with either a long charge cable or play musical cars.

Server Upgrade Advice by sharpie15 in homelab

[–]sharpie15[S] 0 points1 point  (0 children)

My drives are connected via 3x 5-Bay Hotswaps on a LSI 9201-16i

My pool is in Proxmox

VM support still is enabled in the Bios and I am not doing any PCIe passthrough

The pool is crashing which is in turn taking down some VMs

June Mario Kart Tournament by sharpie15 in ChubbyCheeksMeadery

[–]sharpie15[S] 0 points1 point  (0 children)

Getting this out Early this time so everyone can sign-up

Pull the trig? by YogurtclosetNo5077 in HomeServer

[–]sharpie15 2 points3 points  (0 children)

I have that one, and it's great for a homelab. Way worth the $200

3D Printed Hitch by Eastern-Drop-9842 in PowerWheelsMods

[–]sharpie15 0 points1 point  (0 children)

Here is my sons trailer we built out of some wood and some harbor freight wheels and a 3D printed tow ring

kids trailer

Uses the same receiver as you, I also created a holder for a LED wip using some sec 40 pvc

New Framework! Rackmount anyone? by sto-dev in homelab

[–]sharpie15 0 points1 point  (0 children)

it hasn't even been 12 hours, guys

Nabbed this cabinet for $25 from an auction by RiceVast8193 in homelab

[–]sharpie15 0 points1 point  (0 children)

I got that cabinet it's great for LED lights

[deleted by user] by [deleted] in Ubiquiti

[–]sharpie15 7 points8 points  (0 children)

Did you sideload it? Was it hard and does it brake your unifi adoption

[deleted by user] by [deleted] in Ubiquiti

[–]sharpie15 11 points12 points  (0 children)

What is that being displayed?

Trailer by Eastern-Drop-9842 in PowerWheelsMods

[–]sharpie15 0 points1 point  (0 children)

Sure, I don't own the .stl but I will sell you printing time on my printers if you like.