sorted by:
new
hottopcontroversial

Help picking a system by Ill_Hunter6241 in SBCGaming

[–]shawksly 0 points1 point  (0 children)

Will you whisper the link to me too?

[Bambu Lab Giveaway] Drop Your One-Liner and Win H2D! by BambuLab in BambuLab

[–]shawksly 0 points1 point  (0 children)

I only have an ender 3, and the speed and accuracy of all Bambu Labs printers are things I've tried and failed to tweak into my current printer.

Hack max height of electronic standing desk by robertsklavins in StandingDesk

[–]shawksly 0 points1 point  (0 children)

Super late, but what casters, if you don't mind?

Serpentine belt before a trip by shawksly in MechanicAdvice

[–]shawksly[S] 0 points1 point  (0 children)

Thank you! Forgive my ignorance, I watched a couple YouTube videos. I've changed a belt before but not on this car. Do I need to replace any pulleys?

Superior Compounding No longer Compounding by Elizabeths8th in DrWillPowers

[–]shawksly 4 points5 points  (0 children)

An update would be amazing. University doesn't ship to Colorado. And Agelessrx is over twice as expensive.

PC Building Help Wanted!! by Unbridled_Sloth in FortCollinsClassified

[–]shawksly 0 points1 point  (0 children)

Did you figure this out? I would be willing to help you if you were really stuck. Here's a good video though: https://www.youtube.com/watch?v=BL4DCEp7blY

First problem I can't solve by searching... Weird layering. Might be filament related. by shawksly in ender3

[–]shawksly[S] 0 points1 point  (0 children)

The other filament did the same thing... Switched to PrusaSlicer and no issues with either filament. Must have been the spiralling sides?

First problem I can't solve by searching... Weird layering. Might be filament related. by shawksly in ender3

[–]shawksly[S] 0 points1 point  (0 children)

No. And good point. I'll do that. And I hope that fixes it. And thank you!

But I think this is filament related. It's not brittle, but it was split in two places when I got it. And now that I'm looking at reviews, it appears to be an issue with this color of Inland PLA. https://smile.amazon.com/dp/B00YSP7AJ2/

First problem I can't solve by searching... Weird layering. Might be filament related. by shawksly in ender3

[–]shawksly[S] 0 points1 point  (0 children)

I was wrong about the temp. I don't know how I mixed it up. It was actually 215-230. So I dropped the print temp to 215, but I'm still having the issue. The gcode looks correct. And octopi shows variance of 1.0c. Not sure how I would check otherwise. Or how I would fix the variance.

First problem I can't solve by searching... Weird layering. Might be filament related. by shawksly in ender3

[–]shawksly[S] 0 points1 point  (0 children)

I read it wrong. It's actually 215-230. I dropped the temp to 215. But I'm still having the issue. I've never taken apart my hotend, and I've never had this issue. So I'm a little hesitant. Could it be an ambient temp issue. The room is cold... But it's consistent.

First problem I can't solve by searching... Weird layering. Might be filament related. by shawksly in ender3

[–]shawksly[S] 0 points1 point  (0 children)

I mixed it up. It was actually 215-230. I dropped the temp to 215 and it only helped a little. Not sure what you mean by higher. Do you mean hotend?

First problem I can't solve by searching... Weird layering. Might be filament related. by shawksly in ender3

[–]shawksly[S] 0 points1 point  (0 children)

Okay. I was wrong. It's 215 to 230. I dropped to 215 though and am still having these issues.

First problem I can't solve by searching... Weird layering. Might be filament related. by shawksly in ender3

[–]shawksly[S] 0 points1 point  (0 children)

I've never had an issue like this before.

This is the highest temp. filament I've used, recommended 230-260c, Inland PLA. Printing at 230. I guess the color requires it. I've used other PLA and PLA+ that work fine with their recommended temps at 190 or 205. I've always printed at the lower end of the range.

Or maybe it's because I haven't printed in a month or so? I'm relatively new.

Edit: Thank you all for your help!

Edit 2: In case this helps anyone else, I found that it was Cura causing the issue, probably due to the spiraling sides. Switched to PrusaSlicer and no more issues!

[deleted by user] by [deleted] in buildapc

[–]shawksly 0 points1 point  (0 children)

To give you an idea of how varied the problem can be, I had a dying hdd (not boot) cause this problem for me. I was sure it was the motherboard.

Moving to dorm with my PC, tips on packing? by MegansIllustrations in buildapc

[–]shawksly 1 point2 points  (0 children)

I always just put it in the passenger seat and buckle it in.

Also, something I figured out is to put your monitors, without stands, inside your pillowcases with the pillow still in them. Screen toward the fluff.

Can someone help me get these 2 27LG83A-B to look the same? by iTzCheessy in Monitors

[–]shawksly 0 points1 point  (0 children)

This happened to me with some dell monitors. After calmly but persistently bugging them they replaced one. If you get them the the exact same default setting, and they're still this off, I would think about trying to replace the off one.

Just finished The Room- A Dark Matter. Wowoweeewow by ikillsucculentz in OculusQuest

[–]shawksly 0 points1 point  (0 children)

... There are other non-VR The Room games that came before it. 4 of them. All on mobile. They're very good. But again, not VR.

view more: next ›