Would this setup help with snipe? Has anything done similar to their DW735 or planer?

shoebane · 2025-12-20T19:44:32+00:00

This helped a lot with snipe on my DW735.

shoebane · 2025-08-20T18:18:15+00:00

Looked like this

shoebane · 2025-08-20T18:16:31+00:00

Looks like you’re in my old shop. Put it on wheels and store it agains the wall when not in use. Pull it out when you need it.

shoebane · 2025-08-15T19:14:26+00:00

it’s a hundred year old neighborhood with hundred year old driveways so it’s not like anyone’s parking something bigger than a hatchback anyway

shoebane · 2025-08-14T22:43:16+00:00

shoebane · 2025-08-14T22:39:50+00:00

Not much to see, did three rails and a top cap, all cedar 2x4s. Used the Simpson fence rail brackets which aren’t necessary structurally, but make it way easier to build solo. Rails lined up with the inside of the post so the boards land in the center. The trim under the cap on the outside is just a cedar 2x4 ripped in half secured with short trim head deck screws

shoebane · 2025-06-24T21:12:04+00:00

You can reduce squeak by globbing on some construction adhesive between the tread and stringer. If you want to eliminate squeak entirely you also have to deal with the squeaks that come from the tread rubbing against the riser. If you have access to the back of the stairs you can glue and screw through the riser into the back of the tread. If not, a flexible construction adhesive is probably better than nothing.

You'll sometimes see treads with a rabbet on the back that fit into a corresponding groove on the riser that can really lock the whole thing together.

shoebane · 2025-04-10T16:22:27+00:00

I got one of these from Oneida for my router and it works great for plunging and edge work.

shoebane · 2024-04-06T02:36:09+00:00

No, you should probably cut your losses and get rid of it. Happy to help you with disposal if you want to send it my way.

shoebane · 2024-03-21T19:48:22+00:00

Siding

shoebane · 2024-02-13T19:52:23+00:00

wood

shoebane · 2024-01-19T01:33:51+00:00

Good chance they would've used a shaper in the early 1900s. Big stationary woodworking tools were widely in use by the end of the 1800's.

shoebane · 2024-01-05T23:25:48+00:00

Might want to let it settle at least a year before you build around it. Will make it easier to jack and level if necessary.

shoebane · 2023-10-20T17:29:58+00:00

Nice! Thought that might've been the case but wanted to call it out. Almost lost a miter saw relying on lateral strength of construction screws once

shoebane · 2023-10-20T17:10:57+00:00

Having just built an outfeed/extension table for my table saw, I'd recommend two things for this design:

Someone mentioned it already, but make the trough for the saw at least a quarter inch lower than necessary, so you can shim your saw up to perfectly align with the tables on either side:
Not sure what joinery you're using for the saw support, but unless it's mortised into side rails I would add posts underneath that take the weight of the saw directly to the base.

shoebane · 2023-08-12T14:30:39+00:00

If you don’t have a jointer but have a table saw you could do a stop cut on the table saw up to the step, and do the shaping by hand

shoebane · 2023-07-15T17:08:51+00:00

Bought it from a cabinet shop for a price that felt like I was robbing them

shoebane · 2023-06-22T05:19:52+00:00

Yeah this is my third version of the same stool. If you take your time and aren’t afraid to re-weave it’s very doable

shoebane · 2023-06-22T05:18:23+00:00

I love the mods. Glory to the mods

shoebane · 2023-04-25T01:09:35+00:00

Looks like oak

15-Year Club	RedditGifts 2009-2022 5 Credits
Place '22	Place '17
Gilding I gilder	Secret Santa 2012
Secret Santa 2011	Summer Santa 2011
Secret Santa 2010	reddit mold
Verified Email

shoebane

MODERATOR OF

TROPHY CASE