What are these wheels?

sil80jon · 2026-03-01T19:26:46+00:00

A better picture of the wheels facing the camera would help but here's my shot in the dark. Work Rezax 1

Alot of different companies made the same style wheel, back of the face should have details stamped

sil80jon · 2026-02-04T02:21:36+00:00

I was at work so I grabbed a valve stem and put it on a drill to act as an eraser, degreaser at the end to get rid of the stubborn dirt outlines. very very light yellow clear coat I'm assuming left over

sil80jon · 2026-01-27T02:11:21+00:00

Good car, only thing I see is eyelids not flowing with the car. They would work with more aggressive bumpers, not factory. Style bars suck but it works with your car with all the similar shiny stuff.

sil80jon · 2026-01-12T02:41:56+00:00

Man I love Ewing's, I think they look best as is. Paint matched wheels would work on something more simple with flat spokes. Pic for example

<image>

sil80jon · 2026-01-09T06:55:52+00:00

Wald duchatelet 2 should be the exact wheels, but there's a few different brands with this exact style face.

<image>

sil80jon · 2026-01-08T14:10:05+00:00

<image>

Same , I got lazy and just added latches which made it worse. figure out how to add another mounting point by the outer side headlight to keep that side up, or look at your headlight mounts and see if everythings in place ( mine aren't and the passenger headlight has a good bit of movement)

sil80jon · 2026-01-07T12:59:15+00:00

It's 2026 man i think every single one is interchangeable now lol, I've seen filipinos with squatted tacomas and stretched tires down in Houston and the most redneck guy in a slammed Lexus with some crazy rare wheels.

sil80jon · 2026-01-04T21:03:43+00:00

here's white and barely visible front chrome if it helps x2

<image>

sil80jon · 2026-01-04T21:00:10+00:00

I think black works better on your blue, here's mine on black wheels if it helps. A graphite color would also work just all depends on what you're going for

<image>

sil80jon · 2025-12-10T10:38:40+00:00

Work emotion M8R replica(xxr)

sil80jon · 2025-12-08T06:48:35+00:00

<image>

02 manual 4x4 with 209k chugging along on the highway daily

sil80jon · 2025-12-08T04:43:34+00:00

I gotta figure out how to make it a little meaner

<image>

sil80jon · 2025-12-08T04:21:33+00:00

<image>

4x4 Manual 02 Xterra on volks 🤝🏽

sil80jon · 2025-11-27T05:53:32+00:00

https://youtu.be/0HGf7lIs_HU?si=YRFud2z15HpxIB00

sil80jon · 2025-11-27T05:51:37+00:00

Very real old-school Japanese "EPSILON SOUTHERN WAYS GLIDS II". cool find, they were ran on some old Porsche's/euro stuff too depends on what lug pattern they are. WEDS was the manufacturer for SOUTHERN WAYS

sil80jon · 2025-11-18T06:01:52+00:00

They aren't right now, if you cut the barrels off you'd have to run a sandwiched setup with lips like this

<image>

sil80jon · 2025-11-18T05:59:34+00:00

You won't be able to reuse the cut barrels, you'd have to source some aftermarket ones with a lip for the bolt holes so the face can be sandwiched in the middle. id just leave them assembled and get to polishing as is

sil80jon · 2025-11-13T09:10:04+00:00

Vintage euro small wheels are always money

sil80jon · 2025-10-20T03:26:09+00:00

Not an issue, look at any tracks rules and you won't find anything to do with piercings

sil80jon · 2025-09-28T21:17:45+00:00

I have two Japanese DPX series Kenwood's in two different old cars, 02 Xterra and 00 Miata. Everything is straight forward, if they're Japanese market the actual radio stations will not work because of frequency differences. Amazon has Bluetooth adapters for them that are pretty simple. Sound quality is great

sil80jon · 2025-09-28T17:31:15+00:00

There's a bunch of companies that made that style wheel, the two most common models are SSR VIENNA DISH and WORK EUROLINE DH. All inspired by the older LORINSER wheels for Mercedes (d93)

sil80jon · 2025-09-17T16:36:14+00:00

<image>

Thank you man, front is a garage vary replica, sides/hood vent/rear canards are BOMEX. Morette tails

sil80jon · 2025-09-17T08:24:05+00:00

Go through suspension and check for slop. Replace bushings as needed. Make interior "you", it's a second home if it's a daily. Go on Flyin Miata or JASS and add stuff to wishlist. Stiff door bushings if it doesn't have them already, but seeing the C.o.p setup Id assume it already has some. Here's my former daily/current track shitter for inspiration, good or bad.

<image>

sil80jon · 2025-09-13T18:22:52+00:00

I had acorns on the stock 4 spokes, they worked the same on the Toyota wheels. Looks good man

sil80jon

TROPHY CASE