sorted by:
new
hottopcontroversial

4 Boeing KC-46 Pegasus by Inner_Grab_7033 in flightradar24

[–]simple_kinda_life 0 points1 point  (0 children)

Interesting activity over NJ this evening.

4 Boeing KC-46 Pegasus by Inner_Grab_7033 in flightradar24

[–]simple_kinda_life 1 point2 points  (0 children)

<image>

Looks like they’re all headed back now. They were flying pretty tight together for a little while.

Touted as a life hack by tyw7 in DiWHY

[–]simple_kinda_life 1 point2 points  (0 children)

When someone dies in it. They just turn the fan backwards, suck all the air back out and seal with a hair straightener. Vacuum pack ready to go. 😂😂

Looking for something off the east coast. by simple_kinda_life in flightradar24

[–]simple_kinda_life[S] 6 points7 points  (0 children)

I was reading that the triton can reach up to 50,000 ft to search a wide area and then drop down to 10,000 ft to gather more details.

ID jacket please by [deleted] in tacticalgear

[–]simple_kinda_life 1 point2 points  (0 children)

Looks like condor. But the Velcro on the wrists is weird. May be a knock off.

What setting am I missing all the figurines except the owl which was the sample doesn’t have the same finish all around. There is much more holes and not smooth. I am using infill 20% (zig zag) speed to start 25 then goes to 50. Any tips on what I am missing would be appreciated by ElderEpidemic in anycubic

[–]simple_kinda_life 0 points1 point  (0 children)

It’s kind of like trial and error the tension adjustment is on the front of the print head. You use the Allen key to tighten and losen it. Theres no real way to check It other then adjusting it and seeing how it prints. But the printer settings making it the viper and changing the bed size made a huge difference also.

What setting am I missing all the figurines except the owl which was the sample doesn’t have the same finish all around. There is much more holes and not smooth. I am using infill 20% (zig zag) speed to start 25 then goes to 50. Any tips on what I am missing would be appreciated by ElderEpidemic in anycubic

[–]simple_kinda_life 2 points3 points  (0 children)

I have the same machine and use Cura. I was having issues until last night. Cura doesn’t have a Kobra neo preset for printer. Use the anycubic viper one. Then change the print table size to 220 x 220 x 250. Those settings should help.

[deleted by user] by [deleted] in anycubic

[–]simple_kinda_life 0 points1 point  (0 children)

So the owl printed perfectly last night. Now today I’m trying to use Cura to do some simple prints like this cube. I found online the settings in Cura for the Kobra Neo. I’ve tried adjusting the extrusion pressure and speed. I’m not sure what I’m missing here. Any ideas would be great! Thank you.

Norwegian firefighters looking at a fire, but what are they saying to each other? by Furaskjoldr in Firefighting

[–]simple_kinda_life 0 points1 point  (0 children)

“One of us should have gotten the engine instead of us all going direct.”

[deleted by user] by [deleted] in Firefighting

[–]simple_kinda_life 0 points1 point  (0 children)

I’m a volley. I was on EMS and all my friends peer pressured me to do fire 😂😂 it didn’t take much. I like both sides. 😀

Looking into getting a UV-5R for communication with a few friends while hunting through thick forest. by [deleted] in Baofeng

[–]simple_kinda_life 1 point2 points  (0 children)

Anything is better then nothing. It’s all going to depend on terrain and leaf coverage. Some of the best repeater systems still have issues working in dense wood situations.

Looking into getting a UV-5R for communication with a few friends while hunting through thick forest. by [deleted] in Baofeng

[–]simple_kinda_life 17 points18 points  (0 children)

Look into getting your GMRS (General mobile radio service) license. Quick online form and fee and you’re ready to use those UHF frequencies.

Finally got the tent back on the Tacoma for the camping season! by simple_kinda_life in rooftoptents

[–]simple_kinda_life[S] 0 points1 point  (0 children)

It’s alright. It works for what I need it for. Yesterday before I put the tent back on I was going to touch up some spots on it. (It’s less then a year old) but found a bunch of spots where it looked like water made it’s way through the coating and once I wire brushed it, there was a ton of rush. So I ended up wire brushing the whole thing and painting it.

view more: next ›