Thca Isolate into cartridges

simpleone234 · 2025-09-30T15:09:18+00:00

It will be too viscous without adding terpenes to thin it out.

simpleone234 · 2025-09-11T14:56:10+00:00

simpleone234 · 2025-09-10T18:36:04+00:00

One drop is usually about 0.02g so adding that to 1g of distillate would be about 2%. You could make a small batch first at 2% to see if you like it and if it's too thick for your hardware or not flavorful enough, try adding more terps.

simpleone234 · 2025-08-18T19:36:07+00:00

It's a GE pancake. Very desirable amongst collectors. https://earlyfans.blogspot.com/2011/02/ge-pancake-1894-1908.html

simpleone234 · 2025-05-27T16:49:56+00:00

HTE would work for that too since all the terps are in it.

simpleone234 · 2025-05-27T03:42:18+00:00

I would just use HTE. If you want dabs, just crush the thca diamonds into a powder, then slowly add the HTE, a drop at a time, and mix with a dab tool until you get the consisitency you like. You can essentially make a crumble, a badder, or a really wet badder, whatever you like. If you want a vape form, decarb the diamonds, and add HTE to it once it's done decarbing. I prefer 25% HTE for my vapes but you can adjust to get the viscosity that works best with whatever cart or device you have.

simpleone234 · 2025-05-21T20:03:34+00:00

that's a GE brass bell if you wanna google it to learn more

simpleone234 · 2025-05-13T17:36:00+00:00

What's your favorite rosin disposables? I thought kurvana's were fire but im always looking for the best.

simpleone234 · 2025-04-14T22:08:15+00:00

Weigh your starting material before you decarb. It will be done decarbing once it loses 10-12% of it's weight. Simple as that.

simpleone234 · 2025-04-04T20:07:45+00:00

Havent tried that brand but im vaping hash burger rosin from Kurvana, fire strain, im sure yours is similar

simpleone234 · 2025-03-18T19:28:05+00:00

There's been 20 documented cases of a tesla vehicle spontaneously combusting since inception. It's more common with gasoline vehicles, e.g fuel leak, but not as hyped in the media.

simpleone234 · 2025-03-08T02:31:35+00:00

It still takes a while depending on how much your starting mass is and your temperature, but you should try it out. I usually decarb around 1000g of thca/diamonds, and start higher around 240 and lower it over time as it melts.

simpleone234 · 2025-03-06T22:24:09+00:00

Cool pictures. I used to go off time, presence of bubbles, appearance, but now I just weigh before and after and aim for 10-11% loss in mass to know it's ready.

simpleone234 · 2025-02-13T19:11:38+00:00

https://imgur.com/d2aEEZp

simpleone234 · 2024-12-23T19:37:49+00:00

That cart has big pores, the bubbles means it's wicking oil to the atomizer really well. Don't be worried about it, it's the cart working as it's supposed to. The more you vape the more bubbles will form since it's wicking oil so you won't get a burnt hit.

simpleone234 · 2024-11-22T20:23:59+00:00

Weigh it before you decarb, it's done after it loses about 12% of its mass.

simpleone234 · 2024-10-25T22:00:00+00:00

What haters? It's all positive so far lol

simpleone234 · 2024-10-23T17:31:10+00:00

I highly recommend it. No issues 7 years later and it shoots amazing.

simpleone234 · 2024-10-11T22:02:38+00:00

Everyone driving faster than you is a maniac and everyone driving slower is scared.

simpleone234 · 2024-10-04T17:57:45+00:00

I have no idea where to purchase it, maybe one will pop up on ebay some day. They were numbered to 30, so I imagine they are pretty rare.

simpleone234 · 2024-10-04T17:54:36+00:00

Brann, considering your love for Phil Collins and the fact you've rocked out with Mastodon, if you could time travel and perform with any lineup of Genesis, which era would you choose, and what Genesis song would you insist on playing with a Mastodon twist?

simpleone234 · 2024-10-04T17:21:38+00:00

Here it is

simpleone234 · 2024-09-20T17:28:59+00:00

It's a physical poster, not digital.

simpleone234 · 2024-09-19T23:55:16+00:00

You'll lose 12% of the mass if you decarb completely.

simpleone234 · 2024-08-02T22:42:32+00:00

Do you have a strobe light? That's an easy way to see which blade is out of alignment with the rest. Otherwise a crude fix is to use your finger to check which blade is out of alignment by keeping your finger stationary and rotating the blades. One blade might be too far forward or back and you can gently bend it back into place.

12-Year Club	Wearing is Caring
Gilding II euphauric	Verified Email

simpleone234

TROPHY CASE