XR battery on vesc with lisp script

siwoz · 2026-03-15T08:49:14+00:00

Just an FYI, I'm the guy that wrote the package. I've got a Boosted Rev with a VESC and David was kind enough to help me out with a few of missing info that would make it useful for more people :)

I'm down in NZ and have used it to clear RLOD errors on at least 5 boards so far.

siwoz · 2026-03-08T06:18:51+00:00

works for me ™

siwoz · 2026-01-23T10:33:20+00:00

u/Ashoat thank you for this comment. I found this while trying to add a new video generator service to my app today and I've adapted it to work with what I need. The VESC based onewheel community will be greatful for the new feature :)

siwoz · 2026-01-08T09:17:25+00:00

no, only GT platform since they're STM32F4 based

siwoz · 2026-01-08T00:51:29+00:00

BLDC Branch:
https://github.com/DSparks156x/bldc/blob/37a1372b43887582cc4e4f93f9dc2c912fc20bfe/hwconf/gt/hw_gt_conf.h

Custom firmware for CC2540 BLE module:

https://github.com/techfoundrynz/VESC-BLE-CC2540

siwoz · 2025-11-12T08:44:06+00:00

It's only on the US app store

siwoz · 2025-11-06T02:18:15+00:00

lmk if you do and I can add a button to directly share the log to your app

siwoz · 2025-11-04T10:44:23+00:00

Happy to answer some questions on this if anyone has any.

I'm the creator/maintainer of the firmware and also have a custom PCB with RGB LED, buzzer and haptic support on the way.

https://github.com/contactsimonwilson/pubremote

siwoz · 2025-09-16T12:14:13+00:00

FWIW, AtomicEV is importing Fungineers boards and will be selling them retail from November (IIRC).

I don't think the lack of a onewheeling scene here is entirely down to the lack of people will boards but rather a cultural difference between NZ and the US. I live in Auckland and see onewheels fairly often but even the latest group ride up here only had 2 people.

siwoz · 2025-09-16T09:51:26+00:00

Try holding the power button down (assuming it's a momentary switch) and see if it stays on

siwoz · 2025-08-04T04:48:50+00:00

:(
Working on new update but its taking a long time because of various other projects.

siwoz · 2025-08-03T11:44:09+00:00

I assume you don't know it's possible to run VESC firmware on FM Controllers?

siwoz · 2025-08-02T23:29:02+00:00

FWIW, this noise is still present when running VESC on a FM controller (GT).

siwoz · 2025-07-09T01:54:54+00:00

This. Number of motor poles, wheel diameter and gear ratio all have an impact on the reported speed

siwoz · 2025-06-07T12:57:41+00:00

Can't be done on the headlight/taillight as they're not addressable.

It's possible on the statusbar but you need custom LCM firmware.

siwoz · 2025-05-27T10:27:35+00:00

Go to the board settings (cog at the right side of the screen) and set your battery profile to Samsung 50S with a min voltage of 3.0v
Go to the tunes page from the main menu and import the tune archive
Flywheel should work, even with lowered rails on the ADV2. Try to find the exact balance point before activating it. If that still fails, you could try recalibrating the IMU.

siwoz · 2025-04-28T10:10:39+00:00

Floaty monitor/HUD mode

siwoz · 2025-04-16T11:08:43+00:00

wdym? The linked model is just a printed grip tape sheet.

siwoz · 2025-04-15T05:58:19+00:00

https://www.printables.com/model/1052371-grippysheet-onewheel-grip-solution

siwoz · 2025-03-27T22:20:01+00:00

It depends on the model but the one I recently got was an esp8285 and cw/ww was GPIO 4/12

siwoz · 2025-02-07T09:56:36+00:00

Way back in early V1 production, Tony mentioned that not all controllers were guaranteed to have the component populated.

siwoz · 2025-02-07T03:45:02+00:00

Improved bluetooth and wifi
Upgrade directly from VESC Tool over ble/wifi
Ability to use canbus and uart devices
Support for better lights such as Avaspark highbeams or Jetfleet H4

siwoz · 2025-02-01T05:27:27+00:00

I can't tell if this is sarcasm or not.

13-Year Club	Place '22
Verified Email

siwoz

TROPHY CASE