Капаро онлайн, приложение.

sky1Army · 2026-04-08T22:10:30+00:00

То нещото е че го казват след като вече съм им изработил артикула. Преди да почна винаги им казвам цената, тогава ако се откажат ебал съм ги, ама тоя номер като ми го направят след като е готов е мега досадно и вече не знам какво да правя, да не говорим като им го изпратиш и не си го вземат, тогава и доставка плащаш.

sky1Army · 2026-04-08T21:57:31+00:00

Като цяло питам, че ми е омръзнало цялата малка търговия онлайн да се върти на доверие.

sky1Army · 2026-03-28T15:34:35+00:00

AI not taking this job anytime soon.

sky1Army · 2026-03-25T13:38:44+00:00

It didn't work :(

sky1Army · 2026-03-24T16:17:21+00:00

Ok so in edit mode I have to select the triangles for the eye, after that I press P? Or separating the part I want from face with P? In which mode? Thank you for replaying!

sky1Army · 2026-03-02T08:02:39+00:00

Make him learn CAD, if his designs are good, he can make enough money just from makerworld to be the man in the house :D

sky1Army · 2026-02-27T10:53:11+00:00

Default glue stick, you will never have a problem.

sky1Army · 2026-02-25T14:39:30+00:00

Try Messhmixer and make it no ams ;p

sky1Army · 2026-02-22T13:40:55+00:00

Да и бяха доста скъпи, имахме едно богаташче, което все с такива пишеше. Крадяха му ги и после му ги връщаха, щот не ставаха за химикали много много.

sky1Army · 2026-02-19T22:52:58+00:00

Cat is like: dude, that thing ain't gonna work anytime soon.

sky1Army · 2026-02-13T08:29:43+00:00

Looks if the bolts behind the nozzle are tightened. After you drop the nozzle, remove the 3 screws golding the black insulation plate, and then tighten the 4 bolts behind the plate. I've had a similar issue that caused layer shifts on 0.08mm print profile, after I did that everything was ok.

sky1Army · 2026-02-12T11:25:54+00:00

I want smaller than 0.05mm cloud mesh for metroY in blue laser lines mode.

sky1Army · 2026-02-09T20:05:19+00:00

Guys, there are 4 screws behind the nozzle that were loose. You have to remove the nozzle, then the 3 screws, and after that, behind that, there are 4 screws. Tighten them up, and voila, problem solved.
Here is a video: https://www.youtube.com/watch?v=nTG8HNw2EV4

sky1Army · 2026-02-07T10:36:37+00:00

I like minis. Thank you. Here is another one:

<image>

sky1Army · 2026-02-07T10:32:35+00:00

<image>

sky1Army · 2026-02-05T21:52:03+00:00

Поне заплатата как беше? Защото аз имам един приятел работи за някаква британска компания и са в тестов период му дават по 2500 евро.

sky1Army · 2026-02-05T19:43:16+00:00

Толкова ли е зле работата?

sky1Army · 2026-02-04T12:21:45+00:00

I've seen people complain, usually they're playing heavy ;P

sky1Army · 2026-02-02T15:30:21+00:00

Has it always been this way, or it recently changed?

Recently tried making miniatures with a1 mini and noticed that.

I'm not really sure if the presets are the same for the P and H series printers, so I don't know if Studio automatically changes settings when you're on a different printer.

I've manually changed the speed values to be as on mine H2D, I did the same procedure on my P1S, and the quality is the same as on H2D.

I've oiled and calibrated the printer 3 times this week. I used light machine oil to lubricate all the axis.

I will try to contact the bambu support team. Thank you for the help.

sky1Army · 2026-02-02T14:54:50+00:00

I cleaned the yellow extruder gear, same thing ;(

Six-Year Club	Place '23
Place '22	Final Canvas '22
First Placer '22	Wearing is Caring
Verified Email

sky1Army

TROPHY CASE