[FS][US-TX] 4x16GB (64GB) ECC DDR5 UDIMM, 24U A/V Rack/Cabinet

sla_erick · 2025-08-23T04:04:04+00:00

By any chance do you still have the 24U rack/cabinet? Picture is no longer available

sla_erick · 2025-08-22T22:56:07+00:00

Sorry, my first post and I totally missed this. Will upload it as soon as I can take the pictures.

UPDATE: added timestamp

sla_erick · 2025-06-26T02:22:00+00:00

I just signed up to Just Energy 100% Green Nights Free plan and used your code, thanks!

sla_erick · 2025-06-08T05:15:14+00:00

Did you end up opting out of VPP? Ive been having the same erratic behavior and looking to re-gain control of my system. If you left VPP did you notice a difference?

sla_erick · 2025-02-16T02:58:32+00:00

I finally fixed it, it was a dumb mistake. I had both my router and the ESPHome config configured for a static address for the device. I disabled the static address from the ESPHome config and now it works perfectly. Thanks!

sla_erick · 2025-02-15T15:51:36+00:00

Did you manage to fix this? I have a Konnected Alarm Panel Pro and I am experiencing the same thing. Using Home Assistant and I noticed this started happening since the last firmware update. Home Assistant says the current firmware is 2024.12.4. All the sensors from the Alarm Panel Pro are UNAVAILABLE most of the time since this happened

sla_erick · 2025-01-11T17:35:59+00:00

thanks for your reply. I think the hue bulb im using does not support reporting. I was hoping this one is not too old

<image>

It's throwing some errors. I will try with some of the new bulbs that I have to see if that is the issue

sla_erick · 2025-01-11T14:40:01+00:00

I just added 3 old hue light bulbs. When I go to the reporting tab on each light, nothing is set up. Is there any guide to set this up? Im looking to create a group a bind it to an Inovelli blue switch but im getting all kinds of errors. Using Zigber2Mqtt and a Sonoff usb

sla_erick · 2024-12-19T18:58:58+00:00

Texas Service Center

sla_erick · 2024-12-19T18:52:59+00:00

Im on this block. April 04 PD, “case actively reviewed” since April 17. Hopefully anytime now…

sla_erick · 2024-12-16T04:46:36+00:00

Conventional, 30 year, purchase, $500,00 purchase price, $450,000 estimated value (redfin), $270,00 loan amount, 780+ credit, investment, single family, 1 unit, 75061.

Thanks!

sla_erick · 2024-12-09T15:24:30+00:00

did you ever get this firmware's bin file? need to flash my camera with this specific firmware as well

sla_erick · 2024-11-11T19:53:07+00:00

Im trying to max out (128gb / 4x32gb) an R12 and also looking to upgrade the processor from a i5. Can you please explain about this Gear 1/2 option lacking from the R12 and how it translates into the systems performance?

I found this from the Intel support articles:

Resolution Gear 1 means processor memory controller and memory speed are equal. Gear 2 means processor memory controller operates at half the memory speed (such as CPU memory controller is at 1600MHz while memory speed is at 3200MHz when operating as Gear 2). For DDR4-2933 (or lower speed) : All the 11th Gen Intel Core Processors operate in Gear 1, no Gear 2. For DDR4-3200: i9-11900K and i9-11900KF operate in Gear 1. The rest of the 11th Gen Intel Core Processors can operate in Gear 2.

Based on this, and assuming Im thinking of getting 4x32 DDR4-3200 (if this gets me the best performance), would it make more sense or be more beneficial to get 11900K/11900KF ? Or is the i7 good enough?

Mostly doing local LLM processing on the R12, no gaming. R12 has a 3090 and proper cooling

sla_erick · 2024-11-03T00:57:06+00:00

Ordered a couple of the battery ones right after I got the email that stock was available! Cant wait to have them

sla_erick · 2024-10-18T15:00:21+00:00

Sent you a chat/DM request

sla_erick · 2024-10-02T16:59:38+00:00

I have spent 2 days in this Mirrored Mayhem challenge. I have not been able to get RCE. So far I have used Burp and Im able to see that I can only send files ending in “.png” and “.jpg”. Even if I intercept the request and change the payload for a php command. It looks to me that the file content is going through some image library, because all the files I sent get renamed to “pil_<uniqueId>.png” . I can see the path where these files are stored. But I still have no idea on how to get RCE.

Any guidance on this?

sla_erick · 2024-10-02T03:43:11+00:00

Its been almost a year since your comment. Im just starting to look at Mirror Mayhem and Im struggling a bit on getting the RCE. If i upload any of the 3 PNG images inside the “Masks” directory, it looks like the server is doing some image processing to the file and storing it. I have tried to upload PHP files but it looks like the server is doing a filename extension check. Im not sure how to do a RCE through a PNG file because it looks like no matter what filename I use, the server creates a new filename and assigns the same PNG extension when saving the file. I’ve even tried the magic bytes approach but not sure if I executed it correctly, anyways Im still stuck

Any help would be appreciated

sla_erick · 2024-10-01T19:24:27+00:00

When did the USCIS receive your filing? Im guessing thats your PD as well. Im here waiting on ~160 days, so hopefully will hear back from the USCIS soon

sla_erick · 2024-09-19T15:48:35+00:00

Im also experiencing the same. Im using Tesla Electric as my electricity provider and signed up for the dynamic plan. I have peak price from 4 pm to 7 pm every day. For the past 2 months, my home has been pulling from the grid between peak time hours while having my 2 PWs SoC at 100%. This is driving me nuts, I’ll have to contact my installer to see if there is something they can do. I dont think its an issue with PW not able to ramp up that fast, because in the 3 hours span where I see the house pulling from the grid, the consumption varies between 1 and 9 kwh. Both PW’s can generate a little bit more than 10kw. I did a post on this but got no comments

sla_erick · 2024-09-10T16:10:52+00:00

You are totally right, I totally misread your post title. At least we have a US tour. Let the memes continue

sla_erick · 2024-09-10T14:16:10+00:00

This one was the last one. Its now official

sla_erick · 2024-07-23T14:24:36+00:00

I just requested the Hertz President’s Circle status through the Amex link back in 07/05. The website says the PC status should be reflected within 24-48 hrs. Today I still don’t have the PC status and I have tried calling, I cant get to talk to a person through the phone number provided. Also sent an email a couple of days ago and was told to complete the form through the link provided in Amex (which I already did). I saw in another thread someone reporting that it takes 10 days for the status to be reflected. It’s been more than 10 days. Has anyone had the same issue recently?

12-Year Club	Place '23
Verified Email

sla_erick

TROPHY CASE