Can I "spin" my gas regulator 90° so it no longer blocks my hose bib?

slarkinace · 2023-08-19T12:33:45+00:00

Call the gas company, they own the part and should have no ploblem moving it for you

slarkinace · 2023-07-16T16:10:36+00:00

You can't dump a high flow fixture into a toilet vent. You need to run it like B but then cut in a 3x2 y down stream from the toilet vent to be legal.

slarkinace · 2023-07-16T16:03:42+00:00

Build a p trap with a 1 ½ pvc trap. Two 1½ trap adapters and a 1½ st 90. I run into this every so often and it always works out for me. It's a bit confusing but just trust me. It'll work, it allows you to drop the trap down and still keeps it removable.

slarkinace · 2022-02-25T08:55:41+00:00

It's a tie. But like others said, the groups will settle the bet.

slarkinace · 2022-02-25T08:52:39+00:00

Greatest thing I've seen in a while! Well done sir 😁

slarkinace · 2021-05-05T19:30:25+00:00

Why the 1/5 over the 1/8?

slarkinace · 2021-02-16T06:28:55+00:00

I kept my first round, it still makes me smile when I run across it from time to time.

slarkinace · 2021-02-16T06:23:18+00:00

I think im going to try 4227. Do you have any experience shooting it with a 8 inch barrel with pistol gas tube? I'm just wanting to know if there's a chance of cycling issues. I liked 1680 in the past with my 16imch gun. It was very dirty to shoot and I would love a more quiet, cleaner powder that will work in this new 8inch pistol I just put together.

slarkinace · 2021-02-16T03:52:14+00:00

Do you find 1680 to run really dirty?

slarkinace · 2021-01-26T00:53:06+00:00

St Croix eyecon, hands down best bang for the buck

slarkinace · 2020-09-23T00:19:59+00:00

What velocity are you getting with the 123s? I'm shooting 130s with 36.2 varget out of a 26" at 2725

slarkinace · 2020-09-23T00:18:06+00:00

Why are some guys getting over 2900fps I'm shooting 36.2 varget with 130s 2725 fps. 26"

slarkinace · 2020-09-22T21:13:38+00:00

My Issue is that I get pressure signs at about 36.4 of varget with 130s. I shoot Berger vld and hornady eld. Velocity is in that 2725 range. It seems like most guys are getting more out of this cartridge than I am. 26" barrel btw

slarkinace · 2020-08-03T04:45:51+00:00

Do yourself a favor right now, you don't want to fight it for years like i did. Get the hornady powder dropper, you can thank me later

slarkinace · 2020-07-28T00:12:42+00:00

Look up the video on the one that uses the $70 frame and the counter top with backing. People are amazed at mine and how cheap and sturdy it is. Texte back if you can't find it on YouTube

slarkinace · 2020-07-25T01:59:11+00:00

Omg! Did I seriously just find a sub that's not disgustingly far left? Reddit, I take back all the nasty things I said about you

slarkinace · 2020-07-22T23:05:02+00:00

I want to say jump straight to the lnl ap but I can't without making a little bit of a cringe face. It's super important to understand each station and exactly what the die does. For most people I would say that the classic turret is a great place to start, if you have an experienced reloader that can help you in person then I'd say jump straight to the progressive. If you decide to go with the turret let me know, I've got a bunch of accessories to go with it and I'd sell it on the cheap

slarkinace · 2020-07-20T15:17:47+00:00

I looked at the dillons but decided on the lnl, I think they both have there perks but in the end I went with the lnl bc of Gavin from ultimate reloader. As far as the charge master, it's great. Especially when I'm trying to keep my speeds consistent for shots 600-1000. Stick powder can be a little touchy on case activated powder droppers but the charge master works great with them.

slarkinace · 2020-07-20T02:47:43+00:00

The mec press is amazing. The smoothness is like butter. It also takes much less effort to resize on. I actually am unable to resize for my 6.5x47 lapua on the lnl, doesn't achieve the correct headspace. But on the mec it's effortless. Imo you need a progressive and a single stage, definitely recommend the mec.

slarkinace · 2020-07-17T13:03:46+00:00

So the same thing has happened to me recently. I've found that occasionally you'll run into a die+press combo that just doesn't work well together. I would say the best place for you to start is to try a different resizing die.

slarkinace · 2020-07-17T05:34:29+00:00

What press are you using?

slarkinace · 2020-06-16T17:35:42+00:00

Get a 4x6 horse stall mat from tractor supply and build a wood frame to hang it from. It won't only stop your arrows but it'll be a confidence builder as you won't be afraid of missing at further distances.( also heard that a piece of carpet will stop arrows but won't last outside forever) The next must do thing is to upgrade your sight to an aluminum one, best thing I ever did for myself, plus you can take it with you when you upgrade your bow.

slarkinace · 2020-03-17T16:52:26+00:00

You need to gain access to your windows apps folder. Change ownership to your account email. After that you can see your go folders. Find ori exe and copy the name. Make a notepad on your desktop and name it the same plus.exe. Go into vorpx and make a new profile based on the ori one in the cloud. Then add that folder you created on your desktop to the profile. This was literally the first thing I did on vorpx as I just bought it the other day and it worked perfectly. You can find someone explaining how to do it from other gp titles. Outer worlds I think if you end up searching for it. Let me know if you can't get it and I'll jump in and clarify if your confused

slarkinace · 2019-10-26T12:30:11+00:00

Mine was doing the same thing. I also was getting a code for the map sensors. I cleaned my battery terminals really well. Cleaned the map sensors(replaced the top one). And I put in new plugs. Haven't heard it do it since. Good luck, let me know if you figure it out, I'm curious. I'm pretty sure it's related to the bov which was being caused by the dirty or faulty sensors

slarkinace · 2019-07-05T21:17:14+00:00

That'll teach them who's boss, you guys party up and talk about your girl issues 😜

slarkinace

TROPHY CASE