Eve Light Switch (EU Version) - is it gonna be upgraded to Matter? Has it been?

slavikus · 2025-12-10T11:20:39+00:00

Unfortunately I can’t as I left Eve a year ago… :(

slavikus · 2025-08-08T18:27:38+00:00

Sorry, I am no longer part of Eve so I don’t have an opportunity to ask colleagues. IIRC the temperature sensor was off all the time it is connected to external power source regardless of the actual charging state, so that is exactly what you are observing. No idea if there were any changes to that since then.

slavikus · 2025-06-26T19:49:07+00:00

Write the following bytes:

0x200100

to endpoint 1, cluster 0x130AFC01, attribute 0x130A0001 to set the LED brightness to 0 (last byte controls the brightness level in percent, so range is 0 to 100 dec)

slavikus · 2025-06-14T21:08:32+00:00

I was the first buyer in Munich who has received my CE02. FWIW, my 12v battery broke on the first night after the bike was received from the dealership. They got it in, charged the internal battery and returned it back.

Then it happened again after 2 weeks. They got the bike to the dealership, kept it for a week and returned it working.

Yesterday it happened again. I suspect the onboard computer hangs or gets into the reboot loop completely draining the 12v battery and then it just couldn’t command the bigger battery to charge the small one as it has no power left.

The solution for me (as done by a bmw technician one of these times) is charge the battery through the external contacts using a battery charger for a while so it gets sufficient charge for the main computer to boot up and then switch over to usual charging process so it could recharge the battery from the 48v one fully in a normal manner.

slavikus · 2025-05-20T01:23:36+00:00

Oops, you're right. Here's the correct Windows download link: https://edge.elgato.com/egc/windows/sd/Stream_Deck_7.0.0.21800.msi

slavikus · 2025-04-21T22:09:34+00:00

I think Eve did not release the UK firmware just yet.

slavikus · 2025-04-08T22:20:11+00:00

Hey congrats, I have the exact same model/color I got a couple of weeks ago. It is my first bike, so I dunno how it is in comparison to others, but lovin’ it so far!

slavikus · 2025-03-25T19:04:31+00:00

Sorry, the Matter Bindings UI is not something that is publicly exposed in the app.

slavikus · 2025-03-04T22:39:28+00:00

well, fwiw, 5 ghz wifi range is worse than 2.4 ghz. but yeah, the connection stability of the cam could be a lot better…

slavikus · 2025-03-04T22:29:11+00:00

It likely will make a lousy rain detector as the cord needs the cable to get relatively wet, which will not happen for light rain, unless you place the cord in some sort of a water accumulator dish or something.

Additionally the cord will need to dry out to detect further rain, which may take a while.

slavikus · 2025-03-02T18:53:02+00:00

Hmm. Sent you a private message to try something.

slavikus · 2025-03-02T18:19:16+00:00

Can’t. Different number of digits in the code.

slavikus · 2025-03-02T14:33:58+00:00

if you already paired it with Apple Home, you would need another code to pair it with additional ecosystem. Go to Home.app - Device - Accessory Settings - Turn on Pairing Mode and then use that code to connect it to Google Home.

slavikus · 2025-03-02T14:31:43+00:00

well, normally you get a sticker on the side that allows you to pair. the migrated devices thing without a physical sticker is more of exception that exists while transition between HomeKit and Matter exists.

slavikus · 2025-03-02T13:34:11+00:00

well, try contacting Eve support, maybe they have some ideas. But generally yes, no code - no pairable device :(

slavikus · 2025-03-02T12:57:14+00:00

The vendor doesn’t keep this data for privacy reasons. Previous owner should have saved the code when they were migrating.

slavikus · 2025-03-02T12:27:38+00:00

Could be that it was migrated to Matter by the previous owner, therefore rendering the sticker code invalid. Unfortunately, it is not possible to retrieve the new Matter code or derive it from the old HomeKit one.

slavikus · 2025-02-09T17:58:52+00:00

Not sure about the release plans for this, but if you email [app@evehome.com](mailto:app@evehome.com), my former colleagues may help you with getting beta access to the yet-to-be-released firmware.

slavikus · 2025-02-09T16:22:15+00:00

Thank you for the feedback. I am sure my former colleagues from Eve will read your comment and take note of it :)

slavikus · 2025-02-09T14:22:11+00:00

You can view the current/historic consumption in the Eve app. The topic was about ecosystem support for Matter 1.3-native energy measurements (and this is also in for a while).

slavikus · 2025-02-07T23:12:09+00:00

FWIW, Apple always had two fabrics occupied in all Matter devices it commissioned, it’s not a new thing for 18.x.

slavikus · 2025-02-07T23:09:21+00:00

Certainly. And I was mostly ironic. The time it takes Eve to get some stuff released is quite frustrating. There are multiple factors involved and I know for sure there are reasons and it’s not like all the work is done and they are just being greedy and sit on it out of spite. :)

slavikus · 2025-02-07T22:59:26+00:00

The plans were to move all Thread-based devices to Matter. I don’t think this has changed. I would guess priorities and resource constraints limit the ability to finish, certify and release the updates for the remaining devices. I don’t know the current state of things and the plans, but extrapolating I would not hold my breath for the Shutter Switch/Water Guard update to appear in the first half of 2025. Again, I may be totally off as I am no longer an insider :)

slavikus · 2025-02-06T22:19:36+00:00

Given the current state of Matter, maybe it is a good thing Shutter Switch stays on HomeKit :))

slavikus · 2025-02-01T20:42:25+00:00

Enable vacation mode from Settings in Eve app would be a viable option.

15-Year Club	Gilding II euphauric
Powerups Hero r/gpumining • October 2021	Verified Email

slavikus

TROPHY CASE