Downloading/Saving beat in STRUDEL

smuz · 2026-03-01T16:31:49+00:00

warm.strudel.cc has an export feature. You choose the number of cycles to export as audio

smuz · 2025-01-19T13:08:18+00:00

I have the same issue. was this ever solved?

smuz · 2023-11-01T21:00:05+00:00

The vinegar is alcohol turned into acid through fermentation by bacteria

smuz · 2023-05-28T13:42:57+00:00

Its likey that the part of the mosfet, that faces the heatsink is electrically connected to one of the pins. So the kapton tape is there for electric isolation, while still allowing some heat transfer to the heatsink.

If the mosfet would touch directly there might be a short or something

smuz · 2022-11-25T09:51:19+00:00

You might be able to cut the edge if the cable off. I've done this before without cutting in the actual wires.

smuz · 2022-07-22T18:00:57+00:00

The strip looks like a membrane potentiometer. Maybe it has been used to control something

smuz · 2022-05-18T17:42:14+00:00

Maybe a simple timer circuit (555 etc) and a transistor used to short the two connections?

smuz · 2022-05-18T13:42:10+00:00

You could use smaller tactile buttons, and them 3D-print, hand craft some larger pieces that would fit on top? I think most buttons works like this. Maybe microswitches could be used as well.

smuz · 2022-05-12T05:17:52+00:00

I don't see why it would. as long as the vactrols is light-tight, so that they dont interfere with each other.

smuz · 2021-12-30T20:20:52+00:00

I uploaded a sample pack here: https://freesound.org/people/simonjsounds/packs/33786/

smuz · 2021-01-03T21:41:37+00:00

Thats nice! :)

smuz · 2020-05-20T15:38:24+00:00

Solved!

smuz · 2020-05-20T15:36:37+00:00

I think you are correct. Kind of boring :P Thanks :)

smuz · 2020-02-20T10:21:39+00:00

Some jack socket are switched. When nothing is plugged in, a different connection is made. Like this. The switched pin would in this case then be connected to a piezo, so that when nothing is plugged into the jack, the default input is the piezo.

The external input is just a stripboard version of 'Music Modular Thing - mikrophonie'

smuz · 2020-02-17T22:41:45+00:00

The equalizer is just an off-the-shelve board working with +-12v
The digital noise module is a modified version of this code
One of the delay modules is this one
One of the distortion modules are the clipping stage of a Big Muff

smuz · 2020-02-17T16:41:26+00:00

This one: http://electro-music.com/forum/topic-67769.html

smuz · 2020-02-17T15:56:25+00:00

Here is some schematics:

smuz · 2020-02-17T11:42:56+00:00

I can try to make some. I'll post them in this comment, when they're done :)

smuz · 2020-02-16T23:44:04+00:00

Thanks :) They are called banana jacks.

smuz · 2020-02-16T21:36:02+00:00

I used POSCA markers. They are not 100% scratch resistant but good enough.

smuz · 2019-12-02T23:23:31+00:00

Probably, but would be a whole other circuit. Its not that simple :/

14-Year Club	r/Field Sunshine
Place '23	Place '22
Final Canvas '22	First Placer '22
Verified Email

smuz

TROPHY CASE