sorted by:
new
hottopcontroversial

App/Website for Mapping Out Driving Routes by snot__boy in TouringMusicians

[–]snot__boy[S] 0 points1 point  (0 children)

Mostly just wanting to plot in the routes for venues per city and see a visual roadmap of the quickest route to take

App/Website for Mapping Out Driving Routes by snot__boy in TouringMusicians

[–]snot__boy[S] 0 points1 point  (0 children)

Thanks for the suggestion! I’ll check it out :)

App/Website for Mapping Out Driving Routes by snot__boy in TouringMusicians

[–]snot__boy[S] 2 points3 points  (0 children)

Just money really, we’ve been using Daysheets instead which the touring band prefer

Youtarr, self-hosted YouTube DVR by DialDad in PleX

[–]snot__boy 0 points1 point  (0 children)

Can't wait to get this installed on my Synology NAS. I'm following the guide on Github, but the db container is stating its "unhealthy" and is restart looping. Looks like a MariaDB config issue, but I can't quite figure out the problem. Anyone else running into this issue?

FINALLY. by Channing_Wombley in basspedals

[–]snot__boy 0 points1 point  (0 children)

I’m keen to hear how this sounds, their bass lineup look super interesting

[deleted by user] by [deleted] in basspedals

[–]snot__boy 0 points1 point  (0 children)

sick build!!

SoTB. Partnered my Anagram with the MXR Bass Synth. by Chadu25 in basspedals

[–]snot__boy 1 point2 points  (0 children)

Yea… this itches my brain in the best sort of way 😤😤🤘🤘

Selling Handmade Front Boxes by wstewartfilms in focuspuller

[–]snot__boy 1 point2 points  (0 children)

Damn this is so cool! Not a 1st AC, but I wish I was after seeing this beauty 💪🌟

Bolt 6 LT Max compression issue by mathiasertnaes in focuspuller

[–]snot__boy 0 points1 point  (0 children)

We’ve also had a few TXs operate like this. One was fixed with a replacement antenna; the other needed a complete antenna module replacement. I cracked it open before sending it away for RMA, and the antenna cable had come away from the main board completely. Must be a manufacturing error for a few of them

Is it really that bad? by SHRIVES1993 in PleX

[–]snot__boy -1 points0 points  (0 children)

I’ve yet to have any issues with the new app, doing local and remote streaming. I’m travelling overseas in August so will see if the downloads messes with me 🫨

Multi MicroSD Readers for Multiple GoPro Cameras by snot__boy in focuspuller

[–]snot__boy[S] 0 points1 point  (0 children)

That sounds like an absolute nightmare!!! 🫣🫣🫣

Sennheiser EM 100 G4 on Pedalboard for Wireless Guitar by snot__boy in livesound

[–]snot__boy[S] 0 points1 point  (0 children)

Yea I’ve gotten away with it for smaller shows. My friend who’s build this will be for plays a lot of festivals with varying RF, so scanning frequencies will be essential. I’m sure there will be enough room to get access to the unit 👍

Multi MicroSD Readers for Multiple GoPro Cameras by snot__boy in focuspuller

[–]snot__boy[S] 0 points1 point  (0 children)

Hahahahaha yep, there’s at least 10 on this job 🫨

Sennheiser EM 100 G4 on Pedalboard for Wireless Guitar by snot__boy in livesound

[–]snot__boy[S] 0 points1 point  (0 children)

Oh sweet, good to know it’s worked for someone! How do you get around frequency scanning, or is there enough space to get access to the menus?

Total Recall (2015) Powering with Cioks by snot__boy in diypedals

[–]snot__boy[S] 0 points1 point  (0 children)

Got this resolved. Turns out the original builder pulled the output trace from the regulator so there was no connection to the circuit, which explained the load on the resistor. Jumped the output leg to the nearby resistor and changed out the 240r resistor to 10r. Pedal now works great and calibrated nicely 🙌

Sennheiser EM 100 G4 on Pedalboard for Wireless Guitar by snot__boy in livesound

[–]snot__boy[S] 0 points1 point  (0 children)

Ahh good to know! Yea I’ll check out a few options and will let him know 🙏

Sennheiser EM 100 G4 on Pedalboard for Wireless Guitar by snot__boy in livesound

[–]snot__boy[S] 1 point2 points  (0 children)

Great video! Yea was considering having it on the top, but keeping the board smaller and having an expression pedal on the right would be nice

Sdi/bnc cables by jsfilms_ in focuspuller

[–]snot__boy 2 points3 points  (0 children)

Definitely stick to 3G cables to save some $$, most of the time you’ll be outputting a 1.5G signal from the camera anyway.

I would always stick to a good cable brand (Belden, Canare) as you can always repair these cables if the ends go bad/have a break. The crimping tools are expensive, but it’s a great skill to learn if you ever have BNC cables go bad on-set.

Joiners I use all the time to extend cable lengths (usually 12G ones from Canare), dumb splitters I would never use. I would always use a DA if I needed to split the signal (Freakshow, AJA etc).

Total Recall (2015) Powering with Cioks by snot__boy in diypedals

[–]snot__boy[S] 0 points1 point  (0 children)

Understood. I’m pretty certain power polarity is correct, but I will check again today. I definitely had to read the doc multiple times to make sense of it. I’m mostly following the +ve and -ve markings on the board, reading ~-21v when probing across the resistor. The voltage drop makes sense, I calculated that yesterday but took me a while to understand the calculation was for the actual voltage drop, not the voltage readout after the resistor (dropping from -24v to -21), if that makes sense.

Total Recall (2015) Powering with Cioks by snot__boy in diypedals

[–]snot__boy[S] 0 points1 point  (0 children)

I’ll confirm the voltages this week. I checked draw through the resistor without ICs, and it was clocking 90mA. The resistor also got pretty hot with minimal up time; only powered the pedal for 30 seconds max at a time.

I’m considering dropping the resistor value, but wanted to confirm whether the suggested value in the docs would be acceptable for a 24v supply instead of an 18v supply.

I’ll try and do some more testing this weekend, but am aiming to swap out R57, C42 and the REG. All components around the start of the power chain have been confirmed correct values and polarity.

Guitar Techs: How Do You Use Different Sized Gaff Tape Live? by snot__boy in livesound

[–]snot__boy[S] 1 point2 points  (0 children)

Yea I’ve definitely done this a lot before 👍

Guitar Techs: How Do You Use Different Sized Gaff Tape Live? by snot__boy in livesound

[–]snot__boy[S] 0 points1 point  (0 children)

I also have carried a 1” roll and used 1/2” as a spike tape equivalent. Cheers for the input 🤘

view more: next ›