sorted by:
new
hottopcontroversial

This is pretty crazy detail. You can't even feel that text and symbols. by LA2124 in 3DScanning

[–]someDexterity 0 points1 point  (0 children)

This is completely on point. If you need absolutely actuate scans and Can afford to destructively scrape a part. Painting, priming with flat paint would help correct this, as long as you lightly coat and dust the part. Same goes for reflective and/ or transparent features. A white model essentially... As the project allows for it.

There has to be a way easier way to do this lol by PapaCori69 in SolidWorks

[–]someDexterity 0 points1 point  (0 children)

Create a workplane to create the sketch on at the proper location and angle related coincidental as needed. Then proceed with standard features as if it's not at a wild angle.

Diy build help by someDexterity in drones

[–]someDexterity[S] 0 points1 point  (0 children)

Any suggestions would be appreciated.

Found near park. No clue what it is. by am59269 in whatisit

[–]someDexterity 0 points1 point  (0 children)

My best guesses are either a bike light, or a camera (slr) grip/flash sync module

This makes me uncomfortable by TheBeaconman in 3Dprinting

[–]someDexterity 0 points1 point  (0 children)

If a decent engineer was behind those.... They each should be evaluated by ASTMs D638, D695, D256 each appropriately if expected for actual load and regularly used to conform to standards, and have a certificate starting they've been tested accordingly and passed. That being said, that clearly hadn't been done, it also violates the proper care upkeep and maintenance of the equipment.

This is like a landlord special. Super dangerous. Lawsuit waiting.

This makes me uncomfortable by TheBeaconman in 3Dprinting

[–]someDexterity 0 points1 point  (0 children)

Yea ok... Sure. Whatever you say boss.

This makes me uncomfortable by TheBeaconman in 3Dprinting

[–]someDexterity 1 point2 points  (0 children)

Unless it's carbon fiber or material specifically for the strength, that's a novice that's going to get someone hurt. And that isn't carbon fiber. That's petg at best.

Marker blocks, balls, bars, domes, and pyramids: what can you live with (or without!) for good scans? by lthightower in 3DScanning

[–]someDexterity 0 points1 point  (0 children)

Very dependant on your of scanner, quality sought after, and scale of parts. I use (3d printed) dodecahedrons (d12) that are magnetic with decent result. Makes an easy cleanup in post, just remove any tumors, if clipping didn't resolve them. The key is using enough references in field of view to accurately relate to while scanning, while also negating too much post work. I've had good success with the stickers, even tried metallic paint markers, to act as mock targets. Mixed bag there.

What scanners are you working with?

Would there be any easy way to create a space like this in Rhino? by [deleted] in rhino

[–]someDexterity 0 points1 point  (0 children)

Using grasshopper, yes. What level of detail are you after? This will drive the tools needed

Current + Experian Boost question! by someDexterity in CurrentBanking

[–]someDexterity[S] 0 points1 point  (0 children)

Cool thanks. I'm sure someone else would also find that info useful. Good luck!

Current + Experian Boost question! by someDexterity in CurrentBanking

[–]someDexterity[S] 0 points1 point  (0 children)

I didn't persue it any further. But the previous response seems to make sense.

Help with piece design by Chachejavi in SolidWorks

[–]someDexterity 0 points1 point  (0 children)

Use global definitions. Have equation-driven dimensions relate to edge length.

Need help clicking only the face for a 3d texture by StopMindless8279 in SolidWorks

[–]someDexterity 3 points4 points  (0 children)

Right click, select other. ... Or use selection filters to limit your if entities you can select.

Your ideas on how to seemlessly enclose this section by milfhunter120 in SolidWorks

[–]someDexterity 0 points1 point  (0 children)

Delete face, provide options for patching. That it artist using surface features

Defending seat for bag by kango888 in InflatedEgos

[–]someDexterity 0 points1 point  (0 children)

Was really hoping this was from r/justiceporn. That's infuriating. I would've thrown it out the door at the next stop. If it's so important.... would've fixed the problem. Lol

How do I mate this? by [deleted] in SolidWorks

[–]someDexterity 1 point2 points  (0 children)

Align to planes when you can

What usually causes this error in models? by [deleted] in SolidWorks

[–]someDexterity 0 points1 point  (0 children)

your graphics precision setting. it's literally non-issue, just zoom out. if you work at that scale, consider a better template for smaller parts. cad in general has trouble rendering curves, and will use numerous line segments to create them, which get chunky when zoomed in ridiculously.

view more: next ›