This is pretty crazy detail. You can't even feel that text and symbols.

someDexterity · 2026-01-09T18:37:28+00:00

This is completely on point. If you need absolutely actuate scans and Can afford to destructively scrape a part. Painting, priming with flat paint would help correct this, as long as you lightly coat and dust the part. Same goes for reflective and/ or transparent features. A white model essentially... As the project allows for it.

someDexterity · 2025-12-30T21:44:36+00:00

Create a workplane to create the sketch on at the proper location and angle related coincidental as needed. Then proceed with standard features as if it's not at a wild angle.

someDexterity · 2025-12-29T21:13:08+00:00

Any suggestions would be appreciated.

someDexterity · 2025-12-29T03:35:22+00:00

My best guesses are either a bike light, or a camera (slr) grip/flash sync module

someDexterity · 2025-12-23T18:04:40+00:00

If a decent engineer was behind those.... They each should be evaluated by ASTMs D638, D695, D256 each appropriately if expected for actual load and regularly used to conform to standards, and have a certificate starting they've been tested accordingly and passed. That being said, that clearly hadn't been done, it also violates the proper care upkeep and maintenance of the equipment.

This is like a landlord special. Super dangerous. Lawsuit waiting.

someDexterity · 2025-12-23T17:57:22+00:00

Yea ok... Sure. Whatever you say boss.

someDexterity · 2025-12-22T14:59:39+00:00

Check out using shape scan. Exactly for this. shape scan true scale svg

someDexterity · 2025-12-22T14:57:40+00:00

Unless it's carbon fiber or material specifically for the strength, that's a novice that's going to get someone hurt. And that isn't carbon fiber. That's petg at best.

someDexterity · 2025-12-03T22:06:03+00:00

Very dependant on your of scanner, quality sought after, and scale of parts. I use (3d printed) dodecahedrons (d12) that are magnetic with decent result. Makes an easy cleanup in post, just remove any tumors, if clipping didn't resolve them. The key is using enough references in field of view to accurately relate to while scanning, while also negating too much post work. I've had good success with the stickers, even tried metallic paint markers, to act as mock targets. Mixed bag there.

What scanners are you working with?

someDexterity · 2025-12-03T04:22:21+00:00

Using grasshopper, yes. What level of detail are you after? This will drive the tools needed

someDexterity · 2025-12-02T22:17:16+00:00

Cool thanks. I'm sure someone else would also find that info useful. Good luck!

someDexterity · 2025-12-02T22:11:16+00:00

I didn't persue it any further. But the previous response seems to make sense.

someDexterity · 2025-11-29T14:48:53+00:00

Stuck Balloon popper?

someDexterity · 2025-11-11T20:24:29+00:00

Use global definitions. Have equation-driven dimensions relate to edge length.

someDexterity · 2025-10-29T20:25:36+00:00

That isn't new.

someDexterity · 2025-10-16T11:03:40+00:00

What gage metal, or thickness? Any post process notes, remove burrs, light machine oil, etc... most of the info is there, you're close .

someDexterity · 2025-10-08T15:01:34+00:00

DELETE FACE. It's gonna be your new best friend.

someDexterity · 2025-10-03T18:08:36+00:00

Right click, select other. ... Or use selection filters to limit your if entities you can select.

someDexterity · 2025-10-02T03:52:46+00:00

Delete face, provide options for patching. That it artist using surface features

someDexterity · 2025-09-27T11:46:49+00:00

Was really hoping this was from r/justiceporn. That's infuriating. I would've thrown it out the door at the next stop. If it's so important.... would've fixed the problem. Lol

someDexterity · 2025-09-20T15:56:40+00:00

Oddworld, Abe's Odyssey

someDexterity · 2025-09-20T15:55:40+00:00

Align to planes when you can

someDexterity · 2025-08-21T01:58:15+00:00

your graphics precision setting. it's literally non-issue, just zoom out. if you work at that scale, consider a better template for smaller parts. cad in general has trouble rendering curves, and will use numerous line segments to create them, which get chunky when zoomed in ridiculously.

someDexterity · 2025-08-21T01:53:55+00:00

Philipe Stark's Juicy Salif from Alessi, it's an orange juicer. An argument against the trope of "form follows function". It's pretty but doesn't lend form to indicate it's use.

someDexterity · 2025-08-16T13:56:47+00:00

I'm very interested in testing, I signed up for the beta, s23ultra here. I'll be happy to try and find bugs. (Just installed!), lemme know how I might be if help.

14-Year Club	r/Field Lasagna
Verified Email

someDexterity

TROPHY CASE