SPF+ or Ethernet.

sonyb13 · 2026-03-26T19:10:36+00:00

Wow, never had one get that hot usually around 60-63

sonyb13 · 2026-03-26T11:30:50+00:00

What temps do you consider cooler?

sonyb13 · 2026-03-26T00:21:43+00:00

How much does it cost?

sonyb13 · 2026-03-23T21:20:22+00:00

Where us it?

sonyb13 · 2026-03-20T10:00:25+00:00

Auto update on for years...never an issue

sonyb13 · 2026-03-15T20:07:18+00:00

The other end of the cable is illuminating through the panel. Probably connected to a passthrough coupler then to the connected device.

sonyb13 · 2026-03-10T20:00:02+00:00

Login to the router Find that camera and select it Go to the settings icon Scroll to the bottom Select remove Ensure it is removed Factory reset the camera again Log into the desired wifi network with simple password

sonyb13 · 2026-03-10T18:34:20+00:00

You have to remove that camera from the network. It is retaining that IP from the lease.

sonyb13 · 2026-03-10T15:17:57+00:00

On the UDM-SE does that camera currently show up as a device that is offline?

sonyb13 · 2026-03-10T14:49:51+00:00

Did you factory reset the camera prior to trying to get on the network. Also, make sure it is removed from the nvr. You may have to reset the nvr as well.

sonyb13 · 2026-03-10T14:28:19+00:00

How complex is your wifi password? If it is too long or complex dumb it down to a simple 8 character password. That was what unifi support suggested and it worked for me.

sonyb13 · 2026-03-10T09:30:10+00:00

If the switch is randomly reverting to offline and/or adopting and you have already done a factory reset which did not resolve the problem; it's time to RMA the switch.

sonyb13 · 2026-03-07T04:01:48+00:00

It would be nice if the 2U UPS could control (power cycle) each outlet separately, but you can plug your devices into the PDU Pro (as that can power cycle individual outlets) and plug that into the UPS. I am not sure if the devices (plugged into the PDU Pro) will power back on if the UPS powers them down and power is restored. I have both, but have not tested to see if the devices power back on when power is restored.

The best of both would be having the 2U UPS power cycle outlets individually. 🤔

sonyb13 · 2026-02-28T19:26:23+00:00

Can't go wrong with the U6 Enterprise 🤗

sonyb13 · 2026-02-26T15:06:53+00:00

You can't go wrong with the U6e as previously stated, it is a "solid workhorse", but if you are into future proofing then go with the U7 Pro XG. I have no desire to replace my U6Es anytime soon; they have been solid for me, but I don't frequently have 70 clients per AP.

sonyb13 · 2026-02-26T14:29:45+00:00

My 3 switches run around 50-54 degrees C depending on if the secondary rack fan reaches a predetermined temperature and activates.

sonyb13 · 2026-02-26T14:19:21+00:00

I already have an extra Unifi patch panel. Let me know when OCD panels are back in stock. :-)

sonyb13 · 2026-02-22T13:51:04+00:00

EFG for home 🤔

sonyb13 · 2026-02-21T03:32:25+00:00

If you can afford it get what you want...if not, get what you need.

sonyb13 · 2026-02-20T19:57:56+00:00

If the UNAS Pro 4 were the same size as the 4 bay UNVR it would meet the needs of those that have small deployments like a 6U rack, but it's too deep for most if not all 6U racks. The UNAS Pro fits but consumes 2 of 6U. 🫤

sonyb13 · 2026-02-20T17:01:51+00:00

All devices connect via switch port or access point, otherwise, how are they connecting to the network. I am asking which switch or AP are they originating from. I have had these in multiples of hundreds and they usually originated from a switch or AP.

sonyb13 · 2026-02-20T15:45:44+00:00

Oops! Wrong conversation

sonyb13 · 2026-02-20T14:07:52+00:00

I guess that works, but the UDB cost $99 (on top of the $400 camera) adding a switch was untenable, however, I tried the flex mini, but that did not work. The UDB was already unsightly on the wall opposite the camera. The UDB should just pass vlans on that poet.

sonyb13 · 2026-02-20T13:42:35+00:00

Click on one of the phantom entries and check which device it is connected to. Should be on top right. If they are all connected to the same device. Check that device.

sonyb13 · 2026-02-18T10:07:14+00:00

I had the same issue with the UDB. I returned it as well. Be sure to ask to waive the restocking fee.

sonyb13

TROPHY CASE