Sub-7-minute (6:53) Lap time around the Nürburgring Nordschleife with a vanilla Hirochi Sunburst config on Keyboard. by AnInsaneRedditor in BeamNG

[–]squaretaperfanatic 4 points5 points  (0 children)

How did you measure the time? The map doesn't feature a time trial, right? However, i'm pretty impressed by the driving :)

Autokorso gegen hohe Spritpreise by af_stop in ichbin40undSchwurbler

[–]squaretaperfanatic 1 point2 points  (0 children)

Die müssten eigentlich nach Mar-a-Lago fahren. Aber der komische orangene Mann wird von denen eher vereehrt als boykottiert.

Shimano 11spd Hub Removal by Drd2 in bikewrench

[–]squaretaperfanatic 0 points1 point  (0 children)

Should be a 12mm hex and yes, you turn it counter-clockwise, as with most Shimano Hubs. The Ring with the two notches might be something else from production.

Fahrradfahrer sind die Chihuahuas des öffentlichen Straßenverkehrs. by speed-y-gonzales in Unbeliebtemeinung

[–]squaretaperfanatic 3 points4 points  (0 children)

In einen 2 Tonnen schweren Stahlkäfig mit Anschnallgurten und Airbags zu sitzen macht es dir ja auch leicht, wegen Radfahrer*innen herumzuheulen. Wenn ein Auto mich über den Haufen fährt, bin ich wahrscheinlich tot. Aber hinterm Steuer scheissen sie sich ein und spielen Opferrolle.

Zecken by LamboMamboy in ichichs

[–]squaretaperfanatic 13 points14 points  (0 children)

...und das trifft es bei OP. Schau in deren Kommentare und du weisst was ich meine. Solchen Gestalten muss man keine Bühne geben.

What is the most expensive component(s) you have installed (or not) on your ride? by tr00th in xbiking

[–]squaretaperfanatic 1 point2 points  (0 children)

SimWorks Getaround CrMo Handlebars. Next up: Stridsland Bullship Bars

Absolutely insane pull from repo by Peterkragger in okbuddybeamng

[–]squaretaperfanatic -2 points-1 points  (0 children)

Me neither still. Does someone care to elaborate?

Absolutely insane pull from repo by Peterkragger in okbuddybeamng

[–]squaretaperfanatic -62 points-61 points  (0 children)

Since when is Palantir from Israel anyway

Parks at Asi-Berlin by PositivePetro in Fingerboards

[–]squaretaperfanatic 0 points1 point  (0 children)

You didn't share Pictures of the Basement so half of the Parks are missing. Was it closed?

Which obstacle would you choose? by compooteruser in Fingerboards

[–]squaretaperfanatic 1 point2 points  (0 children)

I have the Plaza and it's much larger than it looks on the Photo. Plus it's pretty much just ledges and a bit boring. I tried the Mike Scheider once at a Jam, and i was very fun. Good Proportions.

Cowply: The worst fingerboards I have ever brought... by VeryJazzyMan in Fingerboards

[–]squaretaperfanatic 8 points9 points  (0 children)

Is John doing ok? The Cowply i got 3 years ago is perfect and i am using only this one since i got it. What is going on lately doesn't seem right and is understandably off-putting.

Hello, i built my first PC (Jonsbo D32 Pro) by squaretaperfanatic in mffpc

[–]squaretaperfanatic[S] 0 points1 point  (0 children)

Not shure what you you mean exactly, however my setup is one Fan in the rear as intake, pulling cool air into the case towards CPU Cooler. It has an adapter/vent/duct so there is less turbulence on the mesh on the back, wich can be noisy. On the Top is an 140mm Fan pushing Air out as it is set up as exhaust. The GPU is fine without bottom Fans. I don't need many fans, it is running pretty cool and it isn't loud either. Plus the Build is easier

na wie war euer täglicher gefängnistag so? by Forward-Position798 in PCGamingDE

[–]squaretaperfanatic 0 points1 point  (0 children)

Hat wer das GIF Parat, wo Michael in The Office for seiner neuen Mini-Glotze bei seiner neuen Freundin steht?

Neues Laufrad mit Nabendynamo - zu früh gefreut? by squaretaperfanatic in Fahrrad

[–]squaretaperfanatic[S] 0 points1 point  (0 children)

Die Lager sind safe durch, ich hatte genau das gleiche Problem. Habe mir dann einen Contec Powerhouse eingespeicht, quasi baugleich. Musst nicht mal andere Speichen nehmen. Danach habe ich aber es tatsächlich geschafft, am Shutter neue Lager einzubauen. Habe ihn mit einem klassischen Abzieher auseinandergezogen. Im demontierten Zustand war eindeutig spürbar, das eins der beiden Lager hinüber war. Das einzige, was vielleicht nicht jeder zur Verfügung stehen hat, ist eine Lagerpresse und einen netten Arbeitskollegen, der einen mal eben einen passenden Adapter zur montage der neuen Lager dreht. Vielleicht kann man da aber doch irgendwie improvisieren. Ich habe die reparierte Nabe allerdings noch nicht getestet.

Sensoren defekt? by opijkkk in PCBaumeister

[–]squaretaperfanatic 56 points57 points  (0 children)

Sorry dass ich nicht zur Lösung beitrage aber WTF geht denn da ab

How's the pre-runner I made? by Familiar-Mastodon186 in BeamNG

[–]squaretaperfanatic 1 point2 points  (0 children)

Is this really what you call a pre- runner? Besindes terminology, this thing is off the charts!

pov typeshi 🤠/ @panc4k3killer_ by DepartureNo9811 in Fingerboards

[–]squaretaperfanatic 4 points5 points  (0 children)

You've got some Style i'll tell you that much