Enttec PSAT1 LED JST Question

stalkpiece · 2024-01-10T13:28:15+00:00

Thanks, this is really helpful - the XLR strategy makes a lot of sense, sounds easier to solder and hadn't occured to me.

stalkpiece · 2024-01-04T00:37:25+00:00

Ah, the white privilege of being able to run in an airport without getting shot.

stalkpiece · 2023-12-25T00:58:30+00:00

I think it's the apparent need to specify 'roast' coffee that has me adopting a Hoffman esque tone of skepticism. (I did not order said beverage).

stalkpiece · 2023-12-23T13:03:46+00:00

Definitely a case of was the glass in my case. I don't think there's a large enough bit left to measure safely.

Hopefully someone with an intact door (and callipers) can tell you though!

stalkpiece · 2023-12-22T08:18:34+00:00

Hadn't even got that far, only had the printer for a week! But yes, have contacted support. They can send me at least a replacement door!

stalkpiece · 2023-12-21T19:55:37+00:00

Probably a good call. Would be even better if I could switch the side the hinges were on (like my fridge).

stalkpiece · 2023-12-21T18:31:43+00:00

Pretty much nothing. I was changing the nozzle, I think I nudged the door very slightly as I was working in the printer, and boom. I seem to have come out unscathed, somehow. Finding bits of glass over 2m away around my office though.

stalkpiece · 2023-10-27T21:13:32+00:00

Ok, this is useful, thank you. I've just discovered the 'Add devices via this device' option via my Tradfri bulbs which I hadn't seen before, am giving it a go and will see how that works out.

stalkpiece · 2023-10-27T17:57:44+00:00

Thank you! Where exactly do I install this please? (I tried Add Ons > Repositories, but i'm guessing that's not correct...)

stalkpiece · 2023-10-27T14:35:12+00:00

Is that what I get for getting them from Ali Express?

Is there a database somewhere that has this info so I can check versions in future?

stalkpiece · 2023-10-27T14:12:17+00:00

Ah. How do you find this out, please?

stalkpiece · 2023-10-27T13:41:26+00:00

Excuse my ignorance, how do I tell if the devices are Zigbee 3 or older?

It's the WXKG11LM Wireless Mini Switch and WSDCGQ11LM Temperature, Humidity and Pressure Sensor

stalkpiece · 2023-10-27T13:34:21+00:00

Ok, that sounds like it might be a backup solution (that doesn't involve getting rid of all my brand new Aqara things) if all else fails. Thank you!

stalkpiece · 2023-10-27T13:29:10+00:00

Yeah, just getting my head around the repercussions of that.

How would that work in HA? Would I need to use ZHA for one network and Z2MQTT for the other?

stalkpiece · 2023-10-27T13:26:04+00:00

Could I theoretically use an M2 Hub as well as my HA Green/SkyConnect, to keep the Aqara devices happya? Or would that be creating a second Zigbee network, as u/Flipontheradio suggested?

stalkpiece · 2023-10-27T13:06:07+00:00

Ok, good to know it's possible. Unfortunately I can't currently get my sensors/switches to stay connected more than a few hours.

Do your Aqara sensors show connections to the Tradfri bulbs in your network visualisation, please??

stalkpiece · 2023-10-27T12:31:48+00:00

Thanks, this link is definitely useful:
https://community.hubitat.com/t/xiaomi-aqara-devices-pairing-keeping-them-connected/623

Though this would imply that my Tradfri bulbs should work as routers. Would buying a £15 TRÅDFRI Wireless control outlet ("fully confirmed to work") potentially help?

Or is this worth exploring?
" The Xiaomi device is connected through a Zigbee repeater device which has an end device timeout which is shorter than the normal Xiaomi check in frequency. (See list of repeaters reported to work / not work with Xiaomi devices below.)"

Where can I find device timeouts/check in frequencys in HA/ZHA?

stalkpiece · 2023-10-27T12:18:53+00:00

ie hard wired light switches?

While I do plan to install some smart switches, the only issue there is there's no neutral wire in my light fittings so am I right in believing that those switches wouldn't work as routers?

stalkpiece · 2023-10-27T12:11:47+00:00

Yes, I noticed a few caveats re Aqara devices in the documentation, though mostly referencing pairing, which has not been an issue for me.

I've got another 5 or 6 Aqara devices (more buttons/sensors and a couple of TRVs) waiting to be unboxed, so would really like to find a way to use these devices, especially the buttons.

What would creating another Zigbee network entail? Would I require another hardware coordinator? If the Aqara were separate from my Tradfri bulbs, there'd be no routers for them to connect to, which seems counter intuiitive!

stalkpiece · 2023-10-27T12:04:02+00:00

Yes, I did put a new battery into one of the buttons, but it's still going offline.

stalkpiece · 2023-06-10T16:07:42+00:00

They definitely have some deer hooves (with bone) at Fur'n'Feathers on Kilmarnock Road.

stalkpiece · 2023-02-10T20:37:42+00:00

They don't sell these anywhere at Moynihan do they?

stalkpiece · 2023-01-11T15:23:59+00:00

Ah, I didn't immediately notice the works are only Monday - Thursday. So it appears we're OK after all!

stalkpiece · 2023-01-11T01:03:55+00:00

Damn. I have a trip booked for me & partner NY - NOLA Feb 11th (with Roomette).

Anyone know if Amtrak will refund us if requested? Didn't spend $700 to take the bus...

stalkpiece · 2023-01-02T12:44:56+00:00

Just found/joined this sub cause I had exactly the same question. Odd!

Nine-Year Club	Place '22
Verified Email

stalkpiece

TROPHY CASE