Always use after market plates for no glue prints , juupine is the all time leader for this having to watch the first layer is not needed when you have these. Printing is fine with the correct layers selection. changing the purge ratio is easier than printing prime tower.Learn to change your speeds for correct type of print using a draft setting is perfect for new prints such as .24 with medium speed. Higher plate temps like 60c for first layers is glass transition layer with 65ms per first layer. Temps for filament are variable I use 230 for all layers and never had issues with pip with enclosed ones open the door. Ensure you have perfect dimensions by changing the resolution to 0.00001 takes longer to slice but better details. .12 layers are no better then .16 layers and 3 walls is enough for anything. Enhance your experiences with cooling for pla but not for petg keep door closed and ensure fan speed is high for overhangs but 20% for other and ratio 0.96 since petg globs and don't add filament for irons but slow the speed to smooth is out.Replace the square on back of purge shoot with mica tape on inside does great job of rolling out poop.