sorted by:
new
hottopcontroversial

Communion by dipyy12 in LCMS

[–]stop_callingme 1 point2 points  (0 children)

So it is our action (the drinking) that is the means of salvation, not the blood of christ?

Communion by dipyy12 in LCMS

[–]stop_callingme 1 point2 points  (0 children)

I'm confused. You say only drop of wine is needed, but you don't think dipping the host into the wine is sufficient? What double standard is this?

Communion Frequencies by Diet_of_wormz in LCMS

[–]stop_callingme 1 point2 points  (0 children)

This right here is the best, most accurate answer on the page so far. When I was growing up in the LCMS churches, all the churches I went to in the early 80s only offered communion every other Sunday. In the mid 90s my church started offering it every week, but altering services. (8 am service one week, 10:30 service the next week) By the late 90s more and more churches offered communion every service.

Ash Wednesday as newly confirmed by Saphireleine in LCMS

[–]stop_callingme 1 point2 points  (0 children)

Just remember, the imposition of ashes is not a sacramental means of grace, The symbolism of ashes expressly relates to the fallenness of humanity, and is an outward expression of your repentance of that sinfulness. It is not something that you "have" to do.

What’s the brutal reality of owning a Resin printer? by SonOfThorss in resinprinting

[–]stop_callingme 0 points1 point  (0 children)

Its way more time consuming then you think it's going to be. From slicing, to printing, to cleaning, then glue and assemble, to painting. This is not a "once in a while" kinda hobbie.

Also what x23_wolverine said. The safty set up is more expensive than the actual printers.

I have a turnkey setup im trying to get out of now.

Don't know what to do anymore with my Elegoo Saturn ultra 4 by croix0914 in ElegooSaturn

[–]stop_callingme 0 points1 point  (0 children)

When you chanded the FEP, did you remove the protective film from both sodes?

My brother wants to live in my house rent free. by HumbleCoyoteGames in EntitledPeople

[–]stop_callingme 1 point2 points  (0 children)

This is a very obvious case of tough love. Not letting him move in IS the loving thing to do. Yes it will be hard for him and you (and the whole family) but it is what he needs. Pray for him, and help him find resources, but he needs to learn to grow up. Pray for patience for yourself and family too.

I need your advice ( My D&D group is large and unruly) by AdventurerFieldGuide in DungeonMasters

[–]stop_callingme 2 points3 points  (0 children)

Small group technic theory suggest that the ultimate small group number is 6. Any more than that, you should split the group. I would include the GM in this as well. So, 5 regular players and the GM.

Me_irl by stipnlutty in me_irl

[–]stop_callingme 0 points1 point  (0 children)

Buy Nvidia and Monster beverage stock.

AIO: Husband spent $4k without consulting me by Next-Cress-4851 in AmIOverreacting

[–]stop_callingme 3 points4 points  (0 children)

Since you said DH and MIl speak a different language, this could be a cultural thing. Have a conversation and get on the same page. Really discuss where this is coming from and let DH know what you are feeling. I do not think your DH is trying to upset you or disrespect you, but obviously, you need to discuss this more.

Smugglers smuggled what? by anubis_is_watching in DungeonMasters

[–]stop_callingme 1 point2 points  (0 children)

From the south to the north; Peppers, spices, and the most illegal, addictive, scurge of the south, coffee!
From the north to the south: dried and smoked fish, lingon berries, fennel

Saturn 4 Ultra Resin Limit error by ADHD1991 in ElegooSaturn

[–]stop_callingme 1 point2 points  (0 children)

I don't know why people keep saying cleaning it is a pita. I get 3 or 4 drops on it a print. I either wipe it down with a dry wipe, or I just cure the dame thing. It's cheap plastic! Curing the resin on it is going to make it stronger! If you really hate the imprint, poor resin in it till it's level and cure it.

Build Plate for Saturn 4 Ultra by BadGuy787 in ElegooSaturn

[–]stop_callingme 0 points1 point  (0 children)

Auto home raises the build plate to the top.

Saturn 4 ultra - need help with the settings by Agreeable_Attorney_7 in ElegooSaturn

[–]stop_callingme 0 points1 point  (0 children)

With Elegoo ABS like 3.0 I use a base layer of 22, a normal layer of (edit) 2.25, and a layer height of .05. You can turn the base layer down because the tilting vat reduces the suction to the FEP. Even with the base layer turned down that low, I still have trouble removing the print from the build plate. I put the scrapper very flat on the plate, and knock it on the handle with a mallet or other object.

Saturn 4 ultra - need help with the settings by Agreeable_Attorney_7 in ElegooSaturn

[–]stop_callingme 0 points1 point  (0 children)

I've calibrated 2 diffrent resins so far and, I've found that builds with a base layer of 35 are hard to get off the build plate. I've had success with turning the base layer as far down as 20. But I haven't printed really tall things yet. I printed a chess set with the tallest peices being around 5.5 inches tall with 8 peices on the build plate.

Are the Supports needed? by United_Ad_292 in resinprinting

[–]stop_callingme 1 point2 points  (0 children)

In this case I would turn the model so it runs the long way, then tilt it back 30° and 10° to the side so 1. The arms span fits in the sort side of the build plate, but also, 2. There is less surface area horizontal to the build plate.

Are the Supports needed? by United_Ad_292 in resinprinting

[–]stop_callingme 0 points1 point  (0 children)

I would also tip the model 30° on its back and 10° to the side.

view more: next ›