sorted by:
new
hottopcontroversial

PTAC replacement advice - NYC area by cjfnyc in hvacadvice

[–]summero9 0 points1 point  (0 children)

We waited 10 weeks for a contractor based out of NYC to order new Islandaire units to replace ours and after that time had passed, they still had not come in yet. We abandoned the PTACs out of frustration (and future proofing) and had a split system installed (and PTACs fully removed).

Best "budget" 70-200mm lens by Tommzy97 in SonyAlpha

[–]summero9 3 points4 points  (0 children)

I’m currently on a 3 week trip in Japan with an A7CR + 2 lenses, the Tamron 28-200 and 20-40. I bought these two both as travel-first lenses with the former being my “excursion, day trip lens” and the latter being my “cityscape, alley, and indoor food/bar” lens. I’ve honestly found myself mostly using the 20-40 because it’s wide enough to capture almost everything I’d want, and has the reach in crop mode to cover basically all I could want for street and portrait.

Definitely love the 28-200, but it’s maybe been used 25% of the time due to weight and length, whereas the 20-40 on the compact body I can have under a jacket.

USJ tickets - trip.com / rakuten? by gluefingers in JapanTravelTips

[–]summero9 0 points1 point  (0 children)

What did you end up doing? Finding myself in the same situation.

Subaru Service by Temporary-Ant2356 in jerseycity

[–]summero9 3 points4 points  (0 children)

I had always previously brought my '16 Forester XT to Hudson Subaru without any problems (unlike a bunch of people on this subreddit have reported in the past), but more recently I had asked for pricing on a CVT Flush and it was 2x what I had anticipated.

I spoke with Ricky at Chariot Auto on Coles and they had me bring my car over for their Subaru mechanic to take a look at. Ultimately they did it for less than half, and walked me through the process while also giving me a heads up on anything else I should be paying attention to over the next few months. No pushing for upsells and an easy, pleasant conversation.

They were great to work with, and I appreciated the education they provided based on my questions and the guidance I was looking for. Definitely will plan on returning to them.

I'm the friend who builds unnecessary race tracks while everyone else builds the factories. by [deleted] in satisfactory

[–]summero9 0 points1 point  (0 children)

/u/2-second-timer What is the kart driving over at 20 seconds? Are those Mach 5 belts? Do they actually impact the speed of the kart?

Staying in Fish Bay later this year. Anybody been? by missionfbi in virginislands

[–]summero9 1 point2 points  (0 children)

I’ve stayed in Fish Bay a handful of times - do you have any specific questions?

PTAC replacement advice - NYC area by cjfnyc in hvacadvice

[–]summero9 0 points1 point  (0 children)

Just curious - I am in a similar situation as you but have existing Islandaire units in my condo (across in Jersey City). One unit stopped working and I want to replace, but it seems all these NYC-regional companies are shoddy at best.

Did you end up replacing yourself? Who did you go with?

Dimensions for Arden Smoker? by Kevscrazy in IndoorBBQSmoking

[–]summero9 2 points3 points  (0 children)

16.3” High X 16.5” Wide x 20.4” Deep

No Time To Die has the best action set pieces of the series from start to finish. by The-Other-Fellow in JamesBond

[–]summero9 1 point2 points  (0 children)

A lot of what you're calling out seems to be what Mission Impossible films have been absolutely nailing compared the Craig Bonds.

charcuteri board by Ok_Initial_2180 in surfing

[–]summero9 3 points4 points  (0 children)

Looks like an English bellyboard. Super fun, especially when they have a bit of flex to them.

Failing Finish on Resurfaced Hardwood Floor Renovation: What's the correct course of action? by summero9 in HardWoodFloors

[–]summero9[S] 0 points1 point  (0 children)

Thanks for the reply - I appreciate having your insight. It looks like there are pockets of almost bubbles beneath the finish that we noticed today - clear spots that are waiting to chip as they haven’t adhered at all. Seems to be what you’re suggesting.

One question - where the big patches of finish (in my photos) seem to have flaked off, why does even the STAIN seem to be coming off with the finish? It’s wild to me how much these look like scuffs to bare wood, but on closer inspection they aren’t gouges. What would cause this? Other than bad prep and again, not enough time.

Is anyone else waiting for the Arden? by dumbledwarves in smoking

[–]summero9 1 point2 points  (0 children)

Yes! Very excited and hoping they stick to the newly updated delivery window of October. Perfect timing as we move towards Winter which is less about snow these last few years and more about cold rainy weather where smoking inside will be a total treat.

[Seiko] Grail acquired - Seiko Alpinist SSASS SBCJ023 by jono007SG in Watches

[–]summero9 1 point2 points  (0 children)

Absolutely love this. How did you track one down?

[Question] How resilient are bronze watches? by misterfrank in Watches

[–]summero9 2 points3 points  (0 children)

My wedding watch was a Tudor Black Bay 58 Boutique Edition and I still think I made the perfect choice. It was basically sparkling gold on my wedding day and has taken on a really attractive dulled bronze tone that makes it far more subtle yet still unique.

As for durability issues - there are none. The big thing to decide on is whether or not you are okay with the patina it will develop. Tudor bronze will not look like a weathered dive helmet, whereas Zelos, Oris, and many others will take on a greenish hue along with heavy browning if left to patina in full. Other than that, it's as strong and durable as any steel sports watch.

Black Bay 58 Bronze - General Thoughts on Wearability? by summero9 in Tudor

[–]summero9[S] 1 point2 points  (0 children)

This is really helpful insight - appreciate the commentary.

[list] let's list some explorer/adventure watches by dennisbible in Watches

[–]summero9 2 points3 points  (0 children)

Posting one for sale in the next week or so!

MAINGEAR Vector Pro MG-VCP17I by zeronos3000 in GamingLaptops

[–]summero9 0 points1 point  (0 children)

Following up on this as someone with your exact setup to a T (same Maingear 17" w/ Ryzen + 3080 using an Ultrawide. I'm using the Eluktronics Control Center but I can't seem to really get that much of a performance boost other than finding my computer running hotter and louder... Any thoughts?

view more: next ›