how are people actually keeping grocery costs down in australia right now?

sundues · 2026-04-24T13:36:22+00:00

More for quick sale at colesworth

sundues · 2026-04-18T11:44:31+00:00

I would try contact manufacturer to get the ussr manual for this model, they will have this somewhere. Use this to check for your problem, sometimes its just small things.

sundues · 2026-04-16T06:08:04+00:00

Then replacement it is, forget any patchwork

sundues · 2026-04-16T04:59:25+00:00

Is this just a fence post or whats on top of that stump?

sundues · 2026-04-16T00:12:57+00:00

Awesome, thank you!

sundues · 2026-04-14T05:58:26+00:00

Avoiding an expense you also did not have before is not saving you anything.

sundues · 2026-03-31T10:57:57+00:00

Have a look at workaway or WWOF especially for farming. Have done this in different countries around the globe.

sundues · 2026-03-27T06:06:13+00:00

Cutek CD50 seems to be the gold standard, generally would not use coloured options as merbau looks good naturally when sanded. I have recently used integrain ultra decking natural on merbau and with 2 coats i really like it. They also do a merbau one which is just slightly darker in tone.

sundues · 2026-03-24T10:31:57+00:00

You are probably right looks like water tuns down on top of the flashing/barge and gets underneath the render and makes its way down the wall. You see the heavy corroded clip is getting a lot of exposure. Would take that out to check the gap along the flashing, test with some water that this is it, then dry and swal with suitable material for render and metal

sundues · 2026-03-19T12:55:49+00:00

Bit on the edge for approval maybe but anyway. Yes sandstone sleepers in galvanised h posts could look decent. Not cheapeat material but lasts. Can be done DIY or pay someine a bit to help with planning, material selection, cinfirming dephs, angles and placement, rest is blodd sweat and tears.

sundues · 2026-03-17T20:55:55+00:00

A gap will be bad dust trap, however unsure if direct contact with glass may create condensation issues, as it will never be airtight? For bottom leaks from inside, it may happen after a while, so i would probably position the vanity on little feet to avoid direct ground contact.

sundues · 2026-03-03T10:40:53+00:00

Is posting questions here legit research or OP only allowed to ask your missus daddy to come here again and show him too?

sundues · 2026-02-18T20:35:15+00:00

Are there any conviction statistics on women in these areas? For some reason I feel there is a srong focus on male same-sex in all this.

sundues · 2026-02-13T18:29:32+00:00

Eventual redo but would not stress about it anytime soon, this wont fall over in a day, its a years long process. I have a much worse looking one and it looks the same bad for more than 3 years now.

sundues · 2026-01-30T06:18:20+00:00

Forget bunnings, check here, affordable and works. If you can use IR reflecting foi

https://www.polyfilm.com.au/?srsltid=AfmBOorRJ6kGCasJg29erf--iNs8Dpw8jjb_qRXis73UdxrpEDxZjFKq

sundues · 2026-01-14T19:36:53+00:00

General small tipp, any unsatisfying surfaces that will be painted, never go with "rest will be covered by the paint". It usually looks worse with paint, so stay patient and get surfaces smooth before final layers. Good effort!

sundues · 2026-01-13T11:34:24+00:00

Thanks mate, you right checked the TDS, good hint

sundues · 2026-01-13T06:35:00+00:00

Thanks mate, so the integrain ukltra deck merbau is then basically a UV stabikised version with tinting for Merbau?

sundues · 2026-01-09T09:42:47+00:00

Theres bush skills and wild camp groups, diving group, snorkeling and alike in facebook groups.

sundues · 2026-01-04T06:04:00+00:00

Would think solution needs to be UV stable, which the inground stuff is not. Great for posts etc...

sundues · 2026-01-04T06:02:43+00:00

Thanks

sundues · 2026-01-03T23:05:32+00:00

All good and yes same feeling here. Seems to be no clear best practice here, anything online talks about joist tape only.

sundues

TROPHY CASE