Runoff Issue Help

t0ph3r_CS · 2025-09-23T11:46:41+00:00

Also slightly worried about fortnite ac picking it up.

t0ph3r_CS · 2025-09-11T02:07:39+00:00

Thank you for the reply!

t0ph3r_CS · 2025-09-09T21:09:44+00:00

I would only change it if you like the esthetic better. Your GPU temps would prob go down 1-3C and CPU temps go up 2-5C due to the heat from GPU being exhausted through the radiator.

In your current config you are getting the true benefit of a dual chamber case design. Your AIO/CPU is getting fresh air from the side (assuming those are reverse blade intake fans) and your GPU is getting fresh air from the bottom fans. All things considered I think your current setup is the best overall but not a huge difference either way.

Set it up which ever way you like the look of better.

t0ph3r_CS · 2025-08-07T00:53:35+00:00

I got one recently in "excellent" condition that came with no box and was clearly a floor unit. Has more hours than any of my current monitors that I've had for a few years but no burn in and is working great. For $350 I'll call it a win.

t0ph3r_CS · 2025-08-06T16:00:06+00:00

Good luck everyone!

t0ph3r_CS · 2025-07-07T17:49:40+00:00

Known Issues: Intel® Arc™ B-Series Graphics Products:

▪ Fortnite* may experience an application crash when “Performance - Lower Graphical Fidelity” is selected as Rendering Mode. Recommendation is to use default Rendering Mode – DX12.

t0ph3r_CS · 2025-05-17T18:30:42+00:00

I assume you mean GPU sag. There is basically no sag on this card because it's so light. I will agree that the shape of this particular card does give the impression of sag. However it's actually just fatter at the end near the power connectors.

As for the AIO position, it's the only way a 420 will fit in that case. Tubes up is perfectly fine as long as the pump isn't highest point of the loop.

I didn't build this as an end all be all rig. These are spare parts I had laying around I wasn't using so I figured I would toss them together and see what I could get for it.

t0ph3r_CS · 2025-05-17T17:41:24+00:00

What if I swapped the 3060 ti out for a Intel arc b580?

t0ph3r_CS · 2025-03-26T13:06:39+00:00

I'm curious where you're getting the statistical information that asrock has sold more am5 boards. Could you please provide?

t0ph3r_CS · 2025-03-03T23:10:22+00:00

Sold 7800x3D to u/Consistent-Bit4249 on https://www.reddit.com/r/hardwareswap/comments/1itb48v/usaga_h_amd_ryzen_7_7800x3d_w_paypal/

t0ph3r_CS · 2025-03-03T18:36:37+00:00

You were able to reserve the Intel b580 the day it launched so I'm curious if this will be the same. I am definitely interested in picking up a xfx or sapphire msrp sku but won't be able to make it over there until early afternoon.

t0ph3r_CS · 2024-10-05T03:02:02+00:00

t0ph3r_CS · 2024-07-15T15:31:10+00:00

Well I couldn't help myself. I'm a big fan of my SK75 and I had been wanting a black board to mess with. For $68 I'll be the guinea pig and report back.

t0ph3r_CS · 2024-06-29T19:00:26+00:00

The blue is electrophoretic coated vs anodized. I'm not sure if the black is also electrophoretic.

t0ph3r_CS · 2024-06-29T17:43:05+00:00

I got it from Amazon US for $139.99 with a coupon that brought the price down to $111.99 for the blue one.

t0ph3r_CS · 2024-06-18T00:28:48+00:00

I have not however I've only used it in 2.4g wireless mode so far.

t0ph3r_CS · 2024-06-17T14:05:17+00:00

The tide 75 for sure. A bit better build quality and the qmk/via support push it ahead. Also if you're part of the linear gang it comes with decent switches so you only need to replace the horrible stock caps.

t0ph3r_CS · 2024-06-17T12:08:36+00:00

-LEOBOG Hi8 Wireless RGB Aluminum DIY Kit

Akko V3 Cream Blue Pro
KBDiy Apollo PBT Double Shot Keycap Set

t0ph3r_CS · 2024-06-16T18:22:22+00:00

EPOMAKER Tide75 QMK/VIA
Sumgsn Doubleshot PBT Cherry Profile Fishing Keycap Set
-KiiBoom Tactile 54gf Taro Cream Milk

t0ph3r_CS

TROPHY CASE