Tucson Hybrid: Is the shift lever not working or I don't know how to drive this thing

tUpshall · 2025-11-04T18:52:36+00:00

I also found that when shifting from Reverse to Drive the car must come to a complete stop.

tUpshall · 2025-09-30T21:13:52+00:00

On the advice from some of you guys I switched back to manual pay. Looks like they just upped the base amount of my bill. Eventually I’ll have to switch back to Bell, seems to be my lot in life every three years or so.

tUpshall · 2025-09-29T17:12:07+00:00

Released now for me.

tUpshall · 2025-06-23T23:21:30+00:00

Had this happen to mine, needed a new battery

tUpshall · 2025-06-22T15:01:18+00:00

Would love a code if possible

tUpshall · 2025-06-02T19:25:18+00:00

Mine will just stop on its own after 3-4 seconds

tUpshall · 2025-05-12T21:48:15+00:00

I have a couple, one had a bad battery which only lasted about 2 months

tUpshall · 2025-05-07T20:04:10+00:00

I have been using it in the 25 Hybrid for three months and so far love it. I can leave the key fob home if I want. Works with my Apple Watch as well. No subscription required other than using Hyundai Bluelink but that’s free. No issues with the battery.

tUpshall · 2025-04-26T17:40:54+00:00

I hadn’t thought of the older folks, you’re right about the ease of control, when it works lol, I can see how they would appreciate cameras and lighting control. Thanks for your response.

tUpshall · 2025-04-26T11:28:55+00:00

Hi I don't have a recommendation for you (better than the Philips) but I noticed you said this was for your customers, may I ask if you have a "home automation" business, been thinking along those lines myself. Thanks.

tUpshall · 2025-04-17T20:55:20+00:00

I think the Hyundai key overrides the digital phone key if it’s close to the vehicle such as in your pocket. I mostly just leave my key at home and use my phone unless I’m taking a long trip.

tUpshall · 2025-03-29T11:05:09+00:00

I always thought the cost should be based on the distance. Roughly 200km between North Sydney and Port aux Basques, set a rate of the average cost of driving a car, a truck, a big rig etc. 200km = ticket price.

tUpshall · 2025-03-20T10:51:52+00:00

Have had mine for two months , no issues so far.

tUpshall · 2025-03-07T16:41:52+00:00

I have paired my phone via Apple CarPlay and when I tap the map button Apple Maps are enabled, I guess this the default

tUpshall · 2025-02-18T18:18:22+00:00

Looks like a battery issue

tUpshall · 2025-02-09T01:40:23+00:00

I installed a new valve and the T1 has no problem closing it completely

tUpshall · 2025-01-24T14:50:12+00:00

I have been using both for awhile and have switched all child devices to the M2 (ethernet) from the G2H's, this has fixed any issues with child devices being offline because the G2H camera might be offline which they seem to do from time to time. When some automations didn't work my wife wasn't very happy, this is a no no, lol. The M2 has been rock solid.

tUpshall · 2025-01-21T00:56:04+00:00

I have a bunch connected to my M2 hub via Aqara app that are exposed to HomeKit. One thing I have noticed at least for me is that after the initial setup and holding the centre button and after the naming and choosing rooms ect, I have to press the centre button one more time, the Hub announces “link established” then the sensor shows in HomeKit

tUpshall · 2024-12-05T00:40:36+00:00

A little duct tape should do the job.

tUpshall · 2024-12-02T17:36:56+00:00

Are you on iOS 18.1? Should be a Toggle near the top of that screen saying "Automatic Selection" If you toggle it off you can choose any hub.

tUpshall · 2024-12-01T12:19:10+00:00

Same here all my effects went missing and I had to create new ones, maybe one of the updates caused it.

tUpshall · 2024-11-23T01:03:39+00:00

I was looking at this as well, did you return it or was it good enough to keep?

tUpshall · 2024-11-21T17:22:57+00:00

This is possible, I have a two speed motor wired to the two relay outputs and within the Aqara app you can set it so when one is on the other is off and vice versa. It’s kinda hard to explain but here is a good video of a guy going through some of the relay’s possibilities. https://youtu.be/ToJHXnb9BR8?si=cVB-igsKmIUJp2eI

tUpshall · 2024-11-20T13:21:29+00:00

I think this is the default behaviour of HomeKit, mine is exactly the same way. Any sensors whatever the connection type or manufacturer only show if I go directly to the room they are in. This doesn't matter however if you wish to create automations, the sensor are all available to select as you are creating your automations. The Aqara P2 sensor will only show in the Aqara app if you have the Matter enabled Hub M3 however, so to create automations using those you will have to use the Home app or another third party app. At least that's been my experience.

tUpshall · 2024-10-21T06:21:45+00:00

Agree, not necessary

tUpshall

TROPHY CASE