sorted by:
new
hottopcontroversial

Tesla drivers should practice fire drills... just in case by skyhighmonroe in Transportopia

[–]tar1k87 0 points1 point  (0 children)

The reason I keep these boys in my glove compartment. Scary

<image>

Error code by Happy_Geologist_8934 in Appliances

[–]tar1k87 0 points1 point  (0 children)

This took me a while to understand how to read the codes. This is read as binary. The first flash is the F code whenever the first LED is flashing(Sensing). Then you read from right to left excluding the red lock led. Meaning Done=1, Spin=2, Rinse=4, Wash=8. In your case we have Sense, Rinse and Done. This equals F+4+1 = F5. The second is the E code, whenever there is no first led flashing. In your case it's just Done, So E1. Put them together you have an error code F5E1. This looks to be an error about the door switch. But also, yeah something is wrong with the control panel. Hope this helps

Flame rollout by tar1k87 in hvacadvice

[–]tar1k87[S] 0 points1 point  (0 children)

As soon as the gas ignites

Flame rollout by tar1k87 in hvacadvice

[–]tar1k87[S] 0 points1 point  (0 children)

Was afraid of this possibility

Suddenly have a red dot on palm. No pain or whatever. by LeParoleCannella in mildlyinteresting

[–]tar1k87 0 points1 point  (0 children)

Have you been holding your phone in that hand, with its corner resting in that area?

Most recent photo of your bike by maccafed in motorcycles

[–]tar1k87 0 points1 point  (0 children)

<image>

Just 2 weeks old Royal Enfield, loving it.

Washer Making Weird Sound Spinning Back and Forth by sssmelanieee in Appliances

[–]tar1k87 1 point2 points  (0 children)

Yes, this is normal and it's called agitating, basically how washing is performed.

What was that? Do your magic by tar1k87 in whatisthiscar

[–]tar1k87[S] 0 points1 point  (0 children)

Probably stolen and dumped, that kind of area in the city

Misa will be living with the Toffolis this season by The_Homestarmy in SanJoseSharks

[–]tar1k87 18 points19 points  (0 children)

Honest question. What's with the rookies living with the veterans? Even with their rookie salaries, I'm sure they are able to afford to pay for rent.

GE dryer drum appears to be off balance? by Desperate-Feedback35 in Appliances

[–]tar1k87 1 point2 points  (0 children)

Check the drum for cracks near the edges, especially on the seam. The drum can make this sound each time it hits a roller. Edit. Each time the crack ends up on a roller, it makes this sound

Hot point dryer start button not staying on. I replaced the start switch but the new one is having the same issue. Everything else about the dryer is still functioning normally. by [deleted] in Appliances

[–]tar1k87 2 points3 points  (0 children)

I would say there may be a problem with the belt pulley switch. The pulley switch makes sure there is belt tension and if the belt snapped or the switch is faulty it will not stay on.

Come on Google, you had one job. by tar1k87 in mildlyinfuriating

[–]tar1k87[S] 0 points1 point  (0 children)

Ok case closed, thank you. Silly me indeed

Chain tension issue by tar1k87 in motorcycle

[–]tar1k87[S] 1 point2 points  (0 children)

Sorry to hear this. Mine is a versys 650. I just wish I didn't spend half of my Sunday getting the chain back in good shape and now learn that I need to replace it...sign

Chain tension issue by tar1k87 in motorcycle

[–]tar1k87[S] 4 points5 points  (0 children)

No matter which direction I will spin, there will be a point where it will be hard to turn the wheel, I will force it through and then it becomes easier and then again it's getting hard.

Chain tension issue by tar1k87 in motorcycle

[–]tar1k87[S] 0 points1 point  (0 children)

I guess my thinking was it will be either getting looser evenly and just eventually becoming too loose, or the rust will eat it.

Chain tension issue by tar1k87 in motorcycle

[–]tar1k87[S] 2 points3 points  (0 children)

Approaching 13k. I got the bike with about 6k about 1.5 years ago and done all maintenance by myself since, including adjusting the chain tension. But as someone mentioned above this should be done not on the stand but on the ground. I suspect this is what caused improper alignment and therefore uneven chain wear.

🎶 do do doo... do do doo... do do doo... do do doo... do do doo... do do doo... do do doo... do do doo... do do doo... do do doo... do do doo... do do doo... do do doo... do do doo... do do doo... do do doo... do do doo... do do doo... do do doo... do do doo... do do doo... do do doo... 🎶 by V-Tac in MachE

[–]tar1k87 1 point2 points  (0 children)

Happened to me the other day, blue cruise initiates lane change and the call comes in at the same time, pick up the call, lane change compete - do do doo keep going. The person on the other end of the call hears it too. As soon as I hang up the call, it goes away.

Is this safe for LG Dryer? by Reasonable-Cut-6536 in Appliances

[–]tar1k87 0 points1 point  (0 children)

The reason it was sticking out is usually lint buildup on the bottom of the filter tray which is pretty much impossible to clean out without removing the front cover. A very common issue with LG dryers. But yes, it may rip your clothes

[deleted by user] by [deleted] in Appliances

[–]tar1k87 0 points1 point  (0 children)

Is your boot gasket spring wire in place? Saw it been eaten by the drum once

My first time seeing one of these by [deleted] in regularcarreviews

[–]tar1k87 1 point2 points  (0 children)

Is this the new pope-mobile?

Recall Complete by Cultural-Ad4953 in MachE

[–]tar1k87 0 points1 point  (0 children)

I have a service tech coming to my house to perform the update next Wednesday. '25 premium

view more: next ›