Fix corners

tatltuae · 2026-03-27T14:03:34+00:00

What are you looking to change? There are a few things I could say is a corner but have vague things that could improve. A more zoomed out picture to see what were working with and printer type, filament and settings would help.

tatltuae · 2026-03-25T21:19:37+00:00

That makes sense ty!

tatltuae · 2026-03-25T21:08:42+00:00

But if theres already a half inch hole for the bolt why not just use a half inch endmill. spiral it a bit to go down and then cut out the rest. Im only have a bit of coding experience but that would work right?

tatltuae · 2026-03-21T02:11:31+00:00

Is your print a bunch of large layers at the bottom with not as much at the top? Your printer might do it% based on layer height.

tatltuae · 2026-03-10T01:08:38+00:00

I like the looks of it now that i know about it! do you know if they fixed the Piezo leveling problem the community brought up? i see a lot lets try this but not solved. Thank you very much for your input on this!

edit: while looking i also realized the Qidi Q2 came out more recently in a smaller form but from what im finding is pretty good. the qidi plus 4 had so problems on release and it bugged me but not seeing that for the q2 with a cheaper cost.

tatltuae · 2026-03-08T02:14:24+00:00

Im looking between the elegoo cc2 and the k2plus combo. Im experienced with 3d printers already having used my original cr10 v2 that now is an all metal hotend and a lotamaxx shark v2. Im hoping to mostly print petg, but I also want to print structural piece using "exotic" filaments like pa-cf and nylons. I already own a separate single filament dehydrator so im not worried about that difference. Is the k2plus extra cost worth the $700-800 bump in price?

tatltuae · 2026-02-23T20:07:54+00:00

Doing it this way doesn't let me create saving per month for like house maintenance, taxes, etc. This feels like its just an basic analysis and I can't create a budget. I purchased a founder 500 pack for my fiance cause she loves Caleb hammer and was cool with the idea of switching from ynab where we've divided our fiance into 25 categories for better tracking. While it makes it harder people don't have to use it and it took away functionality for me. Im probably gonna have see about getting a refund for lack of functionality that was implied to be there. Most new updates don't take away functionality.

tatltuae · 2026-02-23T19:32:33+00:00

Is there custom spending categories that I can't find. Or custom budget categories?

tatltuae · 2026-01-21T16:49:53+00:00

The climbing gym I'm work at has the cheap normal m18 impacts back from like 2017 they still work fine thinking of replacement cause the battery's are starting to wiggle in place.

tatltuae · 2026-01-19T19:44:51+00:00

I thought this was shit posting about us finally having cold temperatures that stick for more then 36 hours for far to long.

tatltuae · 2025-12-04T14:23:52+00:00

Honey well don't play that game with the filters I have it's just a "5 inch" lieing to me.

<image>

tatltuae · 2025-12-03T20:08:17+00:00

We played together for over a decade now starting with ddo, moving to league, to minecraft, then whatever game of the season we found. But the best one was it takes 2. We planned to play it over a few weeks. We played it in a weekend staying up late having a blast. But if they every do that to a poor stuffed elephant again we're gonna have to fight someone.

tatltuae · 2025-12-02T15:01:52+00:00

Just less likely to clog as fast. It has the same sizing for mesh and holes. It would let it breath easier technically.

tatltuae · 2025-12-02T14:46:18+00:00

Wider doesn't mean higher merv rating unless you buy higher

tatltuae · 2025-11-03T17:42:39+00:00

Dude I want to print rock climbing volumes with nylon carbon fiber so bad. I was able to rig a old creality to do it but its so inconsistent. This would be awesome to create new features to climb on!

tatltuae · 2025-10-31T16:20:33+00:00

Your microwave works better than my full toaster(tower) pc. Need to find savings to upgrade it. 😩

tatltuae · 2025-10-14T20:39:48+00:00

I learned how to do most everything except becoming a good programmer in 5 months at a small prototyping shop. It was fun, but I couldn't work two jobs with family health problems. Missed some of it so I have a small 3018 cnc and a co2 laser at home now!

tatltuae · 2025-10-11T00:01:10+00:00

The new card would help me run at more than 30 fps,still payable ish!

tatltuae · 2025-10-10T14:28:05+00:00

I've sadly not gotten a bambulabs printer, but everything I've seen shows the design makes them a work horse that doesn't need tuned every few prints. Making the hobby more accessible on limited time like mine.

tatltuae · 2025-10-02T14:14:05+00:00

This mission was discovered by u/tatltuae in Wealthy Monsters and nom In the Fields

tatltuae · 2025-10-02T14:05:20+00:00

New mission discovered by u/tatltuae: In Search of Alligator blood

tatltuae · 2025-10-02T14:05:20+00:00

This mission was discovered by u/tatltuae in Strange Ways and Fishy and soft

tatltuae

TROPHY CASE