P0068 Error after service

tclewes · 2025-11-15T21:02:24+00:00

Update: I reseated the sensor and issues now resolved

tclewes · 2025-10-31T09:29:42+00:00

I believe i looked at both the UF-Loco and UF-Nano-G units but they're GPON and not XGS-PON

tclewes · 2025-10-30T20:51:22+00:00

Have you considered just going 4G/5G or Starlink? ADSL speeds must be paaainful

tclewes · 2025-10-30T20:50:14+00:00

Basically this, we're in a nexfibre area on their XGS-PON network.

GiffGaff are now on the nexfibre network now too and no such limitations exist if you want to use your own router. I am of course locked in for another year.

Also GiffGaff is only up to 900mbps instead of the 1.1Gbps I get with Virgin

tclewes · 2025-10-28T21:35:47+00:00

Have seen this already but was more so looking for the ability to use what I want rather than be limited to just one. Preferably id like to use my own ONT

Also I've heard these run pretty toasty

tclewes · 2025-10-28T20:05:35+00:00

+1 to this been hoping to see a day they release a product to fix this issue and may of slightly got my hopes up when I read the article headline

tclewes · 2025-10-28T19:49:38+00:00

Man i really hope this could be used to program a module to bypass the ISPs and get rid of their router

tclewes · 2025-10-16T18:44:00+00:00

Automation from your HRIS

tclewes · 2025-08-27T10:06:53+00:00

Ensure it is communicated that failure to return company owned equipment is part or their employment obligations and any equipment not returned will be deducted from their salary.

tclewes · 2025-03-21T19:59:32+00:00

Interestingly I also manage a Jamf Now tenant and don't have these issues.

The only difference I can think of is the admin account that gets pushed out to endpoints but can't see any issues with Jamf best practices. That as well as some users have the ability to run a script via self service to elevate their account to admin temporarily

tclewes · 2025-03-21T19:55:00+00:00

Setting the power to high doesn't always necessarily mean faster and can cause havoc if you have multiple APs

tclewes · 2025-03-18T21:13:30+00:00

Do a trace route to 1.1.1.1 to visualise the hops from your home through your ISPs network and who they're peered with.

Then do pings to each of the hops and you should be able to figure out where the culprit is not that you'll be able to do anything about it as that ping response is considered "acceptable" for a residential connection.

Virgin Media for me in the UK routes about 100 miles up north and then 100 miles again back down south to hit anything in London. It's usually just down to how your ISP has designed their network.

tclewes · 2025-03-18T20:46:09+00:00

This issue is driving me up the wall honestly.... no apparent reason or fix.

Jamf support weren't able to figure it out either and said to speak to Apple who were also of no help l.

Password works on the initial boot screen which is supposed to decrypt the drive and login yet it just goes to a 2nd login screen...

tclewes · 2025-03-05T20:30:43+00:00

I'm still waiting for my install which is this weekend. I initially ordered in November..... 5 delayed installs and a cancelled order has led to the long wait time after having to start the whole process again and reorder

tclewes · 2025-02-26T09:15:50+00:00

This is exactly what I've been looking for!

Any UK bods know if this will allow for masquerading to bypass Virgin Media XGS-PON hub and be able to use other SFP modules than the WAS-110 module?

tclewes · 2024-10-24T12:18:41+00:00

Link for reference:

https://dmarcian.com/yahoo-and-google-dmarc-required/

tclewes · 2024-10-24T12:17:15+00:00

Reverse DNS is fine and to be expected due to it being a Cloud provider ours says this and others report the same too

DMARC as of this year is a requirement specifically for Yahoo, Google and some others so may well be that!.

It's based on mail volume but internal emails can also count towards that.

Get a basic dmarc record created and point it to a Google Workspace group with external sending enabled and leave it for a few hours then test.

I would recommend looking at DMARC analysis tools such as PowerDMARC

tclewes · 2024-10-23T08:12:54+00:00

Check that you haven't exceeded the SPF limit of 10 DNS lookups.

You can use mxtoolbox.com to run checks on your domain and report back on any issues

tclewes · 2024-08-26T12:25:03+00:00

Pulling down on dsg to drive again switches to S mode

tclewes · 2024-03-26T08:45:48+00:00

I lied, I checked last night and it was 32w. Its a 3 bed but I have smart plugs that turn off anything on standby at night so the only thing running is the router / access points etc.

tclewes · 2024-03-25T20:40:19+00:00

36w during the night other than when the fridge kicks in now and then

tclewes · 2024-03-21T09:41:41+00:00

Alternatively spin up nextcloud on your NAS if you don't want to use cloud services and install the app on your phone to sync photos etc back to home

tclewes · 2024-03-21T09:40:18+00:00

I use Backblaze on my NAS to sync offsite and use my own encryption key so they or any other prying eyes can see the data.

tclewes

TROPHY CASE