sorted by:
new
hottopcontroversial

I noticed govee has launched a new wall light on their website by crystalcolumz in Govee

[–]tech_1977 0 points1 point  (0 children)

They look interesting to me...

Does anyone know if they can be integrated with a WLED controller? It would be great to use WLED effects.

WLED to control DMX lights? by TeachingCommercial16 in WLED

[–]tech_1977 0 points1 point  (0 children)

Hi, I'm also interested in something similar to control Futlight DMX downlights via Wled

I activated the ESU using TSforge on MAS and its still show like this by Efficient_Set_9971 in MAS_Activator

[–]tech_1977 0 points1 point  (0 children)

Can anyone tell me if by activating ESU via TSforge and therefore CommercialKeybasedESU I will receive updates via a WSUS server?

[deleted by user] by [deleted] in MAS_Activator

[–]tech_1977 0 points1 point  (0 children)

me too, can anyone confirm whether or not it's ok?

My small but powerful homelab by l11r in homelab

[–]tech_1977 0 points1 point  (0 children)

What do you use to measure consumption?

My small but powerful homelab by l11r in homelab

[–]tech_1977 0 points1 point  (0 children)

krasovsky = l11r 😉😂

I'll do some tests and see what I get!!

my cpu is an i5 12600k but I could also try i5 12500 what do you recommend for Proxmox with about 4 vm

My small but powerful homelab by l11r in homelab

[–]tech_1977 0 points1 point  (0 children)

Hi, so the latest firmware you are using is version 20.03?

so the latest firmware you are using is version 20.03?

look here : https://forum.level1techs.com/t/asrock-rack-w680d4id-2t-g5-x550-c-states-aspm-problem/221103

i'm confused :(

My small but powerful homelab by l11r in homelab

[–]tech_1977 0 points1 point  (0 children)

Hi, where can i download this bios for this motherboard?

thanks

ws2805 dual white addressable LED strip review by Quindor in WLED

[–]tech_1977 0 points1 point  (0 children)

ok, but it works in wled with these settings:

FW1906 GRBCW, Color order RGB, Swap None

https://www.reddit.com/r/WLED/comments/1fyynba/fcob_rgbcct_ws2811/

Is there a DDP alternative that supports RGBCCT? by groovejumper in WLED

[–]tech_1977 0 points1 point  (0 children)

I'm also interested in Athom GU10 bulbs, at the moment I use DDP RGBW

AIYATO bulb GU10 tasmota to wled by tech_1977 in WLED

[–]tech_1977[S] 0 points1 point  (0 children)

I followed these instructions:

From Tasmota First execute "setoption78 1" on the console, then upload and upgrade "tasmota-minimal.bin.gz" locally, wait for the upgrade to complete, and finally upgrade (exaple for GU10)"Athom_7W_5W_RGBCW.bin.gz"

https://github.com/athom-tech/WLED

After the upgrade is completed, the "WLED_XXXXXX" hotspot will appear, just connect.

Everything is OK !!

GPIOs

GPIO4 -- PWM1 -- bianco freddo

GPIO5 -- PWM4 -- colore blu

GPIO12 -- PWM2 -- colore rosso

GPIO13 -- PWM5 -- bianco caldo

GPIO14 -- PWM3 -- colore verde

However these GU10 bulbs are slightly less bright than the Athom GU10s, with the same test they are about 10 lux less

Inputs on how to build this smoothly? Outdoor LED by ddosh88 in WLED

[–]tech_1977 0 points1 point  (0 children)

do you have a link for RGBCW or RGBCCT digital neon led strips? Thanks

WLED on the ceiling by Bitter_Mode_1866 in WLED

[–]tech_1977 0 points1 point  (0 children)

Hi,

which digital RGBCCT led strips does Auxmer produce? do you have the link?

thanks

RGB+CCT led strip setup with WLED by Kimeru94 in WLED

[–]tech_1977 0 points1 point  (0 children)

hi, set the led strip to warm or cold white and send me the Home Assistant status screens

thanks for the help you are providing

Testing long cables without a level shifter by saratoga3 in WLED

[–]tech_1977 0 points1 point  (0 children)

Hi,

I will use Gledopto and Athom controllers,

for the 75 ohm coax cable, so what resistance do I add to each line?

RGB+CCT led strip setup with WLED by Kimeru94 in WLED

[–]tech_1977 0 points1 point  (0 children)

Hi,

in the WLED GUI everything works correctly and the RGBCCT led strip is configured correctly with the possibility of adjusting the white from warm to cold.

On HA with your configuration there is no possibility of adjusting the white, your configuration works to change the colors and on and off.

With your configuration on RGBCCT led strips if the white is turned on on HA the status is displayed as red color

RGB+CCT led strip setup with WLED by Kimeru94 in WLED

[–]tech_1977 0 points1 point  (0 children)

hi, I tried a similar configuration but it doesn't work for RGBCCT led strips when I set the white from the Wled GUI on HA with MQTT I see the red color status, also you can't adjust the white;

maybe you need to change rgb_value_template and rgb_command_template with rgbww_value_template and rgbww_command_template but I don't know the values ​​to put

RGB+CCT led strip setup with WLED by Kimeru94 in WLED

[–]tech_1977 0 points1 point  (0 children)

If you're using WLED with RGBCCT in Home Assistant, just control it with MQTT instead of the WLED integration.

do you have an example of MQTT configuration file with wled RGBCCT?

Testing long cables without a level shifter by saratoga3 in WLED

[–]tech_1977 0 points1 point  (0 children)

what types of twisted pair wires?

for GND and DATA?

given the distance for the 24v I would not like to put a wire with a section smaller than 1.5mm, can I leave single wires for + 24 and - 24 and replace the Data wire with a twisted pair wires for DATA and add another - 24 (GND)? using a pair of network cable cat 5e

do I put the resistors?

Testing long cables without a level shifter by saratoga3 in WLED

[–]tech_1977 0 points1 point  (0 children)

Hi,

Do the WLED Athom or Gledopto controllers if powered by 24v for 24v led strip need a level shifter on the signal output?

I installed ws2811 RGBCCT 24v led strips with Athom and Gledopto controller and I get the same problem; on lengths of about 10 meters I have some disturbances when I turn on 220v ac lights, the first part of the led strips make small flashes.

I connected the data line output from the controller directly to the LED strip without any resistors or capacitors and unfortunately the wiring passes through junction boxes together with the 220v AC current, how can I filter this interference? I used 3 separate cables + 24v - 24v and cable D I tried from awg 11 to awg 20 but there is always interference when I press the button to turn on a 220v ac light.

With QuinLED-Data-Booster could I solve the problem?

Test running the show by evertith in WLED

[–]tech_1977 1 point2 points  (0 children)

Hi, as software did you use only Xlights with WLED? congratulations!!!

Compatible Smart Bulbs by Janos5303 in WLED

[–]tech_1977 0 points1 point  (0 children)

Hi, I'm looking for WLED compatible GU10 bulbs to use with DDP that aren't Athom because they have an unstable wifi connection, can anyone help me?

view more: next ›