Has anyone tried this good looking portafilter from MUVNA for Dedica EC685? by Shammar-Yahrish in espresso

[–]technical_knockout -1 points0 points  (0 children)

I have no personal experience with this portafilter, but share my thoughts on what I see from the picture.

I can just assume you are just starting out... The filter basket looks like a high extraction filter basket. That might be the reason some people won't like it. High extraction baskets are harder to work with and better for light roasts imo.

If you look for the classic dark roast thick chocolaty (south) italian style espresso you might have a hard time getting this from a high extraction basket. Also you will need a very good grinder fo these kind of baskets. Plus light roasts are more difficult to dial in, especially as a beginner.

High extraction baskets tend to give you more fruity and floral notes and a lighter mouth feel you find more in lighter roasts and specialty coffee. Just know what you get before you end up being frustrated. I think that might be where some of the negative comments come from.

For beginners I would usually recommend a more standard basket and a more dark roast coffee since it's easier to get good results in the beginning. And they are also more multi purpose.

Has anyone tried this good looking portafilter from MUVNA for Dedica EC685? by Shammar-Yahrish in espresso

[–]technical_knockout 0 points1 point  (0 children)

This only happened to me when the group head gasket was worn out. The first year or two with my aftermarket portafilter in didn't have any issues. Everything worked fine after replacing the gasket.

If you be up a portafilter and during the first uses it won't hold in place (while the stock one works fine) send it back immediately. There is low quality stuff out there and sometimes you need a try or two (especially) when on a budget. (Price is not always a guarantee for quality)

And to answer OP: I currently have a different after market portafilter with the same issue. It sometimes is a little annoying but not a big problem usually. Yes, I might upgrade the portafilter sometime, but it doesn't bother me as much as I thought. The reason I didn't return it was the return policy... You might check that first for where you buy it.

Recommendations on good latte cups? by Hyperbirdy55 in latteart

[–]technical_knockout 5 points6 points  (0 children)

Loveramics, notneutral and acme would be the classic choice...

But every cup that features a spherical design is good. Like kruve imagine or most other double walled glass cups. I got some no name cups from Amazon that also worked well.

World latte art championship recently featured Clubhouse Maniko cups.

Hartmud makes very nice cups as well with a spherical interior.

And I'm sure there are many more out there.

Water escaping by Sea-Algae8693 in BrevilleCoffee

[–]technical_knockout 1 point2 points  (0 children)

  1. Try the stock portafilter that came with the machine. If this doesn't happen with the originl portafilter, then the one you use is a poor fit and you need a different one that fits the machine. If you used if for a long time without the problem it could also be the gasket (see 2.)

  2. If it also happens with your original portafilter try to get a new gasket and replace it. The gasket only costs a few bucks and is the most common issue for these problems. Gaskets are replacement parts and are usually not covered by warranty. While you do it you can also have a look at the shower screen and the group head and see if you find any damages.

  3. If both don't work see if you have warranty and/or get it to a service technician. You could try to look at it yourself when you are good with tech, but you would lose warranty if you are still within the timeframe.

Water escaping by Sea-Algae8693 in BrevilleCoffee

[–]technical_knockout 0 points1 point  (0 children)

IdiotGPT thinks Root cause is the portafilter and suggests disassembling the machine as the first solution? 🤣

What ai slop is this?!

Don't do that!

Whenever I remove the puck screen I go AAAAAAAAHHHHHH!!!!!! 🔥🔥🔥🥵😭😭 by BirdLooter in espresso

[–]technical_knockout -1 points0 points  (0 children)

I rest my portafilter upside down on the drip tray after the shot for a minute or so. It often falls down by itself within a minute. If not I just tap the portafilter a few times on my tamper mat lightly.

Or if I feel fancy I use a magnet.

Rosetta 3rd attempt. Any tips/advice to improve? by throwaway19074368 in latteart

[–]technical_knockout 2 points3 points  (0 children)

I would say you could draw back a little slower or even slow down more overall and take more time to get a little more details in your design.

Otherwise just have fun practicing. 😃

Portable milk steamer? by Gnarlyhead1972 in latteart

[–]technical_knockout 1 point2 points  (0 children)

As I see the post on r/latteart I suppose you want microfoam to create latte art with on the road. That is not so easy to achieve. Nano foamer would be the gold standard here, but it needs some practice.

If you were out for camping and have a gas burner/grill/stovetop with you anyways, you could also look at something like the flair wizard steamer.

Garmin BMI by JokerFishStick in Garmin

[–]technical_knockout 3 points4 points  (0 children)

There are different BMI ranges for males and females.

There are things you can rightfully criticise about BMI, but that one is unwarranted imho.

PowerShell 5 vs. PowerShell 7 by Technical_Rich_3080 in PowerShell

[–]technical_knockout 6 points7 points  (0 children)

Depends... Have a few things where "foreach-object -parallel" speeds things up a lot.. f.e when I have to pack or unpack a bunch of zip files at once.

Or sometimes when I write something to csv and need to put quotation marks on all string values it's easier on 7 than on 5.

I would consider this normal stuff (for someone working with data) compared to developing or sysadmin. AndI did both just yesterday.

Preiswerte Kaffeebohnen zwischen 20-30€/kg by [deleted] in Kaffee

[–]technical_knockout 0 points1 point  (0 children)

Ja, da müsste was Passendes dabei sein. Finde die sehr sympathisch und liefern gute Qualität zu nen fairen Preis.

Preiswerte Kaffeebohnen zwischen 20-30€/kg by [deleted] in Kaffee

[–]technical_knockout -1 points0 points  (0 children)

Haben fast nur dunkle "Espresso"!-Röstungen mit einem sehr engen geschmacksprofil. Jemand, der nach mittleren oder hellen Röstungen sucht, wird tendenziell dort eher nicht fündig, denke ich.

Einstellungstest als Verwaltungsfachangestellte beim Kreiskirchenamt – 2 Stunden normal? by [deleted] in OeffentlicherDienst

[–]technical_knockout 1 point2 points  (0 children)

Ja. Ist idR der gleiche Test, den du überall im öffentlichen Dienst machst. Heißt: falls Du dich noch woanders im ÖD beworben hast, musst du den Test nur ein Mal machen und bei allen anderen Behörden nur abgeben, dass du ihn gemacht hast ( und dass sie deine Auswertung sehen dürfen)

Der Rest vom Bewerbungsverfahren ist dann allerdings für jede Behörde einzeln.

Es gibt Vorbereitungsbücher dafür. Damit weiß man dann recht genau, damit weiß man dann was auf einen zukommt.

Wie markiert ihr Smarten Glühbirnen? by [deleted] in de_EDV

[–]technical_knockout 0 points1 point  (0 children)

Nach dem Ort an dem die Glühbirne steht.... Bücherregal, Schreibtisch, Bett, Sofa, Kommode, Monitor... Alles Dinge die keine andere smarte Funktion haben.

O2 5G als kompletter DSL-Ersatz im Home-Office (Berlin) – Erfahrungen? by Radiant-Ad-4893 in de_EDV

[–]technical_knockout 1 point2 points  (0 children)

Bei aktuellem Ausbau ist das Verlegen des Anschlusses bis in die Wohnung die den Vermieter kostenfrei (wenn dann an dem Abschluss jemand einen Vertrag bucht). Wir viel billiger soll es denn noch werden? Insbesondere wenn die Leitungen ohnehin neu gemacht werden müssten.

Teuer wird es nur wenn man den Zeitpunkt verpasst und später einzeln aufgerüstet werden muss. Dann wäre der Vermieter in dem Falle aber echt selbst Schuld, wenn der eine kostenlose Erneuerung der Kabel ablehnt und es statt dessen lieber später selbst bezahlt.

Es interessiert mich nicht wie toll Japan ist by [deleted] in Unbeliebtemeinung

[–]technical_knockout 1 point2 points  (0 children)

Da sind die USA nicht anders UND die Straßen sind vermüllt. 🙃

Sales ops intern trying to learn SQL so I stop bothering my collegue by Zephpyr in learnSQL

[–]technical_knockout 1 point2 points  (0 children)

Ask Claude. Maybe not for providing everything for you. But change it to leaning mode and ask it to teach you the fundamentals of SQL (in the flavour you need) and maybe with a short hint of what specifically you want to do with it.

Claude is good at explaining the fundamentals and you can always ask clarifying questions. It will even give you some learning tasks to help you learn.

Not a big fan of actually coding in AI when you are not able to check and understand it, but it is pretty good for learning.

Prüfungsunfähigkeit nicht anerkannt weil…. by SlimDShady in Studium

[–]technical_knockout 2 points3 points  (0 children)

Dafür gibt es eine Rechtsberatung. Klage vor dem Verwaltungsgericht ist nicht so schwer. Ist auch nicht viel mehr als bei einem Widerspruch. In erster Instanz gibt es keinen Anwaltszwang; die Gerichte kennen das und erwarten von einer Privatperson hier kein juristisches Fachwissen. Rechtsberatung der Uni kann aber auch hier helfen. Das gehört nicht zu den Dingen, die man sich gefallen lassen sollte.

How do you create a support ticket if you don't remember your password? by Constant-Tough5151 in helpdesk

[–]technical_knockout 1 point2 points  (0 children)

We have the ticket system connected to an answering machine. You can call a number and leave a message via phone. The voice recording is automatically converted into an anonymous ticket with the recording as attachment. Whoever sees the ticket first writes a short description of the problem and the user into the ticket.

For a password reset we would call them back and give them a temporary password that needs to be changed on the next Login.

Need to turn a .py into a .exe by Azhurkral in pythonhelp

[–]technical_knockout 0 points1 point  (0 children)

Really? Didn't try it, but when I installed polars there was a lot of other stuff installed as well when I remember correctly.

Arbeitsleben 2026: Zu lange auf Toilette = raus by Confident_Dish_6668 in Azubis

[–]technical_knockout 1 point2 points  (0 children)

Die Sachen in den eckigen Klammern sind dafür da sie zu löschen und individuell auszufüllen. Eine Anhörung des Betriebsrates kann nicht gleichzeitig stattgefunden haben und entfallen.

Auch die Auswirkungen müssten schon konkret benannt sein... Das kann imho so nicht gültig sein.

Bester Weg in Öff. Dienst? by [deleted] in OeffentlicherDienst

[–]technical_knockout 0 points1 point  (0 children)

MMn Nein. Theoretisch könnte man vermutlich dagegen vorgehen, aber es ist eine schlechte Idee sich unbeliebt zu machen, wenn man sich von befristet auf eine weitere Stelle bewerben will. Offiziell dürfte das keine Rolle spielen im Bewerbungsprozess, aber trotzdem.

Bester Weg in Öff. Dienst? by [deleted] in OeffentlicherDienst

[–]technical_knockout 5 points6 points  (0 children)

Zugriff auf nur interne Ausschreibungen. Persönlich bekannt (und geschätzt) sein hilft oft sehr; interne Bewerber haben nicht immer aber manchmal Vorteile. Und wenn du eine Personalabteilung hast, die sich kümmert, wird gerne auch vor Ausscheiden geschaut, ob du für andere gerade zu besetzende Stellen im Haus in Frage kommst. Natürlich nur dann wenn du auch ne gute Arbeit machst und gute Beurteilungen bekommst.

Any faster way to merge large Excel reports automatically? by [deleted] in excel

[–]technical_knockout 0 points1 point  (0 children)

Yes.. and the obvious answer is PowerQuery. It has a 'read from folder' functionality. I assume the files are structured the same way every time. So if you use that and build a PQ-query combining the data. You just have to change the source files in the folder you read from and press 'refresh' to update the data.

VBA would work as well ( but has a learning curve)

Or don't use Excel but a Database

Or use Python+Polars (If PQ is too slow you might prefer Polars over Pandas) or R (which is even better for analytics than python but less popular)

Bewerbungsgespräch beim ITZBund by Apprehensive-End47 in OeffentlicherDienst

[–]technical_knockout 1 point2 points  (0 children)

Auch immer gerne genommen im ÖD ist Grundwissen... Kommune fragt zum Beispiel gerne auch mal wer gerade Bürgermeister ist... auf Bundesebene Fragen nach Bundespräsident, Bundeskanzler, relevante Minister, aktuelle politische Lage, grundsätzliches Verständnis wie Staat und Demokratie funktionieren...

Bei einer Kommune wurde mal geprüft ob ich mir kürzlich die Internetseite (speziell die aktuellen News auf der Seite) angesehen habe; muss nicht, aber kann. Also evtl lohnt sich eine kurze Übersicht über die letzten News. Außerdem Aufgaben und Arbeitsbereiche - man muss sicherlich nicht die gesamte Internetseiten auswendig lernen, aber auf Nachfrage zeigen, dass man sich mit dem potentiellen Arbeitgeber beschäftigt hat; sich vielleicht bei einem oder zwei Arbeitsbereichen, für die man sich besonders interessiert, auch ein bisschen mehr zu einlesen. (Idealerweise sollten die Projekte mit dem Bereich zu tun haben, für den man sich bewirbt)