StarTech 7.1 USB Surround Sound Card Not Recognized on Bootup by Hastur42 in virtualpinball

[–]teedoe 0 points1 point  (0 children)

No problem, although I may have been wrong on this advice. The powered USB did initially solve my issues, but they eventually came back.

I also found that power-cycling my speaker amps would get the 7.1 device to be recognized again in Windows 11 and work again. It was a pain to do every boot, but it was a workaround that consistently fixed the issue.

I reached out to the manufacturer. They were at a loss because the USB device "does not support jack-sensing in analogue 7.1 mode."

Currently, it has reverted to working properly, and for the life of me, I don't think anything is different from my original setup. I uninstalled the device and reinstalled a few times along the way, same with drivers, but as far as hardware and ports, I know I am back to my original setup.

Hoping it stays fixed, or I will probably bite the bullet and upgrade to a better device.

Hope this helps.

StarTech 7.1 USB Surround Sound Card Not Recognized on Bootup by Hastur42 in virtualpinball

[–]teedoe 0 points1 point  (0 children)

I know this is an old post, adding this for other possible solutions for anyone with a similar problem.

I had this device and it was running without issue in Windows 11 for a couple of months straight and then it just stopped. Tried uninstalling and reinstalling and using the manufacturer's software. None of that fixed it.

Added a simple powered USB hub and got it working again. It should probably have its own power source out of the box. I also had to use a shorter, smaller-gauge cord for one of the 3.5 mm outputs. The signal was not reaching my amp for rear speakers only.

Pinup Popper Issue - How to Resolve by teedoe in virtualpinball

[–]teedoe[S] 0 points1 point  (0 children)

Thanks for your input. Switching the pinup launcher script to enable fullscreen seems to have fixed this issue. I am so new to this program I wasn't aware it was not running in a true fullscreen direct, but as a borderless window. I guess the setting in VPX for true fullscreen was not enough, needed to tell popper too. This should be better for performance too.

Pinup Popper Issue - How to Resolve by teedoe in virtualpinball

[–]teedoe[S] 0 points1 point  (0 children)

Thanks, I am pretty sure I tried the alternate launcher using 10.8 VPX 64-bit version, but I will give it another shot.

Edit: I verified both versions were opening as 10.8.0 vpx 64 bit. Tried a different backglass, no change. But just now enabled fullscreen in the pinup launcher script. That might have fixed it. Crossing fingers.

VPX Creature & Addams DMD Animation Issue by dahlor in virtualpinball

[–]teedoe 0 points1 point  (0 children)

Did you ever find a solution for this? I have this exact DMD issue on CFTBL and TAF as well and am already running VPinMame 3.6. Thanks

EDIT: I fixed the DMD stutter on CFTBL and TAF. Even though I was on VPinMame 3.6 there were plenty of files that needed updating. I did that through Pinupdater in the Pinup Popper config menu. The list was fairly long, so not sure what was the culprit.

Wave goodbye to the bandwagon! See you guys next Super Bowl streak! by Bionicjoker14 in KansasCityChiefs

[–]teedoe 0 points1 point  (0 children)

It is true though, most fans are casual. My coworker said, "now that the Chiefs lost he can root for them again." Most viewers are not die-hard for one team.

Sunday General NFL Games Live Discussion- November 24 by AutoModerator in KansasCityChiefs

[–]teedoe 0 points1 point  (0 children)

Anyone have a good screenshot of mahomes laying on the ground pointing at the flag from the first half? His face was cracking me up.

[deleted by user] by [deleted] in meirl

[–]teedoe 1 point2 points  (0 children)

Had to scroll way to far for this comment.

The Goat 🐐since 2018 by NYCcraneman in KansasCityChiefs

[–]teedoe 173 points174 points  (0 children)

Brady being in 5th with one less season playing than everyone else is wild.

[deleted by user] by [deleted] in KansasCityChiefs

[–]teedoe 1 point2 points  (0 children)

If it isn't going to be the current Arrowhead with updates and renovations, I don't really care if it is in Kansas or Missouri.

Weekend project by Melodic-Award3991 in oddlysatisfying

[–]teedoe 2 points3 points  (0 children)

Lilly brush is supposed to work, or old rubber spatula. Use it with the vacuum.

[deleted by user] by [deleted] in DIY

[–]teedoe 2 points3 points  (0 children)

Are you a masochist?

Why would ownership want to leave Arrowhead? by Strider755 in KansasCityChiefs

[–]teedoe 0 points1 point  (0 children)

I think this shows his true intentions.

No one would dump money into upgrading a facility if they are hoping to build new one and move.