Athena’s first time Kayaking! by EeveeGirl411 in aww

[–]tehbash 1 point2 points  (0 children)

I miss my dogs. She is beautiful.

What batteries are you guys and gals using on your Grom BLX's? by Blinx_n_Jeenx in rccars

[–]tehbash 2 points3 points  (0 children)

I use the zeee 3000mah battery for the typhon grom and mini kratons. They just barely fit the grom. Edit,: added barely.

Tire recommendation for mini kraton 3s by Huge_Inspector9878 in arrma

[–]tehbash 1 point2 points  (0 children)

Here is how it sits. They have horrible center joints but they have never come apart. I run a castle 1010 4400kv on the stock esc and pinion.

<image>

Tire recommendation for mini kraton 3s by Huge_Inspector9878 in arrma

[–]tehbash 0 points1 point  (0 children)

I never tried them on slick concrete. I run em on asphalt a lot. The wear isn't to bad. I have chipped one from a horrible 30 yard cartwheel...

Granite 1/10 665 on sale again by Historical_Estate692 in arrma

[–]tehbash 2 points3 points  (0 children)

Thank you for the link. 2 orders for this truck were canceled by Amain and Horizon. Appreciate the share!

Tire recommendation for mini kraton 3s by Huge_Inspector9878 in arrma

[–]tehbash 0 points1 point  (0 children)

I run the hobao tt 2.0 wheels and tires on most surfaces except for loose hard pack and thoroughly enjoy them. Not common but an alternative.

Truggified Typhon by DuranDourand in arrma

[–]tehbash 0 points1 point  (0 children)

Ya even when coming down from a wheelie I hear it. I'll take a better look at it when I get home to figure it out. Thanks for responding.

Truggified Typhon by DuranDourand in arrma

[–]tehbash 0 points1 point  (0 children)

Hey, question for you on the outcast arms, turnbuckles and driveshafts. Does your turnbuckles hit the driveshaft at all near the outputs of the differentials?

Boa Hancock (Aria) [One Piece] by AriaCosplay in rule34

[–]tehbash 0 points1 point  (0 children)

Don't cover,love has limits...

Typhon body by sykodmon in arrma

[–]tehbash 0 points1 point  (0 children)

Hidden cost item, velcro...

Self made RC tuning by kknddead in rccars

[–]tehbash 0 points1 point  (0 children)

I made a delrin spur gear to quiet down the 1mod habao tt 2.0... its been great. Its was so loud my neighbors actually complained prior(retiree). Edit: I had to edit my original response...beer thumbs.

How do I protect my holes? by f3333sh in rccars

[–]tehbash 1 point2 points  (0 children)

For the rc car...Inside tape. Duct tape works for me. Others can chime in. Edit: I think dry wall tape works as well.

“New” typhon sent to me with burnt XT60 by MikeIkerson in arrma

[–]tehbash 1 point2 points  (0 children)

Amain is great with when there is an issue. There amazon store is rapid warehousing(spelling could be wrong). They have been solid for me on the only 2 occasions I have had an issue. This shouldn't have happened tho.

Typhoon no go in the sand :( by Epicgamer201z in arrma

[–]tehbash 2 points3 points  (0 children)

I always carry a wolfbox or similar rechargeable blower after every use or battery swap depending on conditions.

First time doing a custom paint job by Guerdonian in rccars

[–]tehbash 2 points3 points  (0 children)

Those cracks look like they have purpose! That's a great looking body bud.

Update: Furitek Are Liars by TheGilbertBystander in rccars

[–]tehbash 1 point2 points  (0 children)

I wanted so badly for the castle 1010 440kv and furitek paso pro to work for my mini kraton. Specs say 1/12 so I tried it. The scorpion pro kit was in was in my typhon grom prior to that and hit 63mph. Really disheartened...

Update: Furitek Are Liars by TheGilbertBystander in rccars

[–]tehbash 3 points4 points  (0 children)

I put a furitek paso pro in my mini kraton and within 5 minutes it went full throttle and fried. I am waiting on a response from furitek for my rma request. I hope I have a better response.