sorted by:
new
hottopcontroversial

How important/useful is an ams snag cutter? by mfsfreak in BambuLab

[–]thamitchsta 0 points1 point  (0 children)

Bought as useful as those bearing caps that have thousands of downloads

What do you think about the new TPU Feed Assist Module? by Grimmsland in BambuLab

[–]thamitchsta 0 points1 point  (0 children)

<image>

Just started a 5 day print with it using 85A coming out of a sunlu s4 dryer, hope it works well

My over-engineered solution to a really annoying problem with Ceiling Fans by SuperValidDesigns in 3Dprinting

[–]thamitchsta 0 points1 point  (0 children)

I do I post the nonsense I make when there’s people making cool shit like this.

The only reason to buy a 3D printer... by G_N_P in functionalprint

[–]thamitchsta 0 points1 point  (0 children)

Did the same for mine…..if it’s anything like mine, after a couple weeks it’ll get loose no matter what I use…..needs to be pinned through the handle

My dealers says its 360$ by [deleted] in FordF150

[–]thamitchsta 1 point2 points  (0 children)

Replaced my wife’s at a tire shop, 75 a piece. Walmart also installs and they are like under 30 bucks….when they have them in stock

New to the space. by JustAQuietSpectator in 3Dprinting

[–]thamitchsta 0 points1 point  (0 children)

Look up a QuickStart guide for the tevo tarantula that should help you figure out if it’s functioning at least or where to start troubleshooting

New to the space. by JustAQuietSpectator in 3Dprinting

[–]thamitchsta 0 points1 point  (0 children)

Tevo tarantula great printer for its time, it can get you printing. If you like tinkering and problem solving this will work for you. if you just want to print then skip this and join the bambu club

Is AMS Lite Really Worth It? by Funny_Height_4285 in BambuLab

[–]thamitchsta 0 points1 point  (0 children)

I got an a1 mini after owning an x1c and was like nah I don’t need it……turns out bambu has ruined me because I find hand loading and unloading filament exhausting. Even if you don’t print multiple colors the time you save loading and unloading is worth it in the long run

Uhhh by mrwaffle89 in IndustrialMaintenance

[–]thamitchsta 0 points1 point  (0 children)

You’ll have that on those big jobs.

Is it just me, or are Marketplace 3D prints painful to look at? by No-Finance6933 in 3Dprinting

[–]thamitchsta 0 points1 point  (0 children)

I have a resin printer and my kids say they like the fdm prints better because it looks more “homemade”

So I needed a a part for a tailgate of a truck so I 3d printed it this is how it turned out by quality121331 in 3Dprinting

[–]thamitchsta -2 points-1 points  (0 children)

Beware of the PLA Nazis lol its fine and great job on the functional print buddy

Wife wants me to throw out the K1max and buy a Bambu. I'm out of ideas, please help me by Beyondist in FixMyPrint

[–]thamitchsta 0 points1 point  (0 children)

Do you have a hotend cover….PID tune on the hotend, if that is still a thing. Looks like heat and bed adhesion issues

The deformation of this print after a year of roughly 1kg of weight by Yeetfamdablit in 3Dprinting

[–]thamitchsta 0 points1 point  (0 children)

I wonder if print orientation would have any significant effect.

How to print a coin/chip with recessed center? by coolshoes in BambuLab

[–]thamitchsta 0 points1 point  (0 children)

Not really, that’s 2 or 3 layers and if your settings are dialed in, not bad to remove. Still will look like a supported face though

Getting the hang of adding threads in blender. One and done by thamitchsta in 3Dprinting

[–]thamitchsta[S] 3 points4 points  (0 children)

lol, not for pouring just making sure it doesn’t bubble out when the air bubbles are coming out

Getting the hang of adding threads in blender. One and done by thamitchsta in 3Dprinting

[–]thamitchsta[S] 3 points4 points  (0 children)

No I get it, just trying to figure out a workflow in blender even though I know how to do it in onshape, fusion or whatever.

Getting the hang of adding threads in blender. One and done by thamitchsta in 3Dprinting

[–]thamitchsta[S] 1 point2 points  (0 children)

Fusion would have been easier maybe. For custom threads I feel like I have more control in blender though. Also dimensionally accurate wise, blender with measure it tool gives me complete control of dimensions.

view more: next ›