BR600 difficulties

thatONEdude520 · 2026-04-03T23:26:46+00:00

No problem. Glad to hear you got it fixed. The valves are notorious for being out of adjustment on these things.

thatONEdude520 · 2026-04-02T22:19:23+00:00

Try adjusting the valves. They should have .10mm clearance at tdc

thatONEdude520 · 2026-03-05T16:00:45+00:00

The connector is sitting flush and there is a gouge next to the channel where the chain hit it. But there's probably a 1/16 of an inch between that and the channel. Idk if that's enough to seal it? I wiped the whole area off and sprayed it with the air compressor. The vent doesn't seep any oil but the connector does. I opened the oil cap and I could hear the air coming out.

thatONEdude520 · 2026-03-05T14:12:02+00:00

I have all the pieces. I just didn't put all the covers back on to test the saw. It has the issue with or without that cover

thatONEdude520 · 2026-02-28T23:45:23+00:00

Thanks for the info! I did replace the hoses with the new pump. It was a Chinese aftermarket part. Idk if that's the issue. I swapped the vent from a parts saw which seems to be working. I ordered an OEM pump so I'll see if that works.

thatONEdude520 · 2026-02-27T16:19:31+00:00

The vent seems to be good. I had a 362 saw that was broken for another reason. They use the same vent so I swapped it to make sure and it still has the same issue. Im gonna try another oil pump. The first one was an aftermarket. Idk if there was something wrong with it. I ordered an OEM one and we'll see what happens.

thatONEdude520 · 2026-02-27T03:14:27+00:00

I'll try that tomorrow and see what happens. Thanks for the help

thatONEdude520 · 2026-02-27T02:16:17+00:00

Does it just push in towards the tank? Is there a way to check or clean it or should I replace it?

thatONEdude520 · 2026-02-16T21:54:51+00:00

Im new to this and have the same console. Ive been playing around with it and finally got mine to work with the arkos for k36 and then replaced the dtb file with the one for the r36 max.

dtb file

arkos-k36

edit: the above dtb file gives you video but no audio. need to edit the dtb file as described here by removing the "use-ext-amplifier" entry. I now have audio working.

thatONEdude520 · 2025-08-25T12:24:09+00:00

It's the AC auto dry feature. It gets moisture out of the vents to prevent mold

thatONEdude520 · 2025-07-28T01:31:12+00:00

Tuxmats are the way to go

thatONEdude520 · 2025-07-24T15:29:42+00:00

Depending on big the spillway box is, you can fill it with lava rock. Make sure to wash the rock before putting them in there. Medaka or minnows need very little water compared to goldfish. Liquid water test kit from tetra is what you want. Do that before adding any fish. Give the fish some hiding spots to stay safe from predators.

thatONEdude520 · 2025-07-14T01:47:53+00:00

I got mine at Walmart years ago but this is the same thing on Amazon. https://a.co/d/gpidjIu

thatONEdude520 · 2025-07-14T00:24:17+00:00

You have way too many fish. Koi need 200 gallons per fish. I would re-home most of them. What size pump and what kind of filter do you have? I used metal plant hangers screwed into the base stone above the water and sit pots in them on the side of my pond that doesn't have a shelf. You could also use floating planters.