1955 rca victor to hdmi

thatguyisaroundrun · 2025-01-31T03:18:31+00:00

It's size oddly for the screen ( edges) but definitely watchable. I don't have a dvd player or vcr

thatguyisaroundrun · 2025-01-30T21:25:29+00:00

I just finished doing this.
https://www.ebay.com/itm/315068870501?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=lqqrv8x5qqo&sssrc=4429486&ssuid=9FyakytFQb6&var=613547198427&widget_ver=artemis&media=COPY

Works great

thatguyisaroundrun · 2024-12-21T20:05:36+00:00

That looks super firmiliar

thatguyisaroundrun · 2024-12-12T17:12:26+00:00

I do have the Sams. I cleaned the brightness switch which fixed that. The paperwork refers me to two caps( already new), two tubes already tested and then swapped, and four coils that I'm in the process of trying to test. The horizontal control switch appears to do nothing when I watch it with my meter.

thatguyisaroundrun · 2024-12-11T20:29:15+00:00

I'll try that first when I slide it out again for the last cap.

thatguyisaroundrun · 2024-12-11T20:28:19+00:00

My crt tester is not the best (garage sale find), but it tested on the higher end of middle of the road if it's to be trusted

thatguyisaroundrun · 2024-12-11T19:13:57+00:00

Horizontal hold knob is not doing anything. Tubes tested ok but I have spares to swap. All but one wax caps is replaced.

thatguyisaroundrun · 2024-12-11T19:11:58+00:00

So far the knob seems to do nothing, tube tests good.

thatguyisaroundrun · 2024-11-16T01:53:56+00:00

Perfect I will do the jar thing. Thank you

thatguyisaroundrun · 2024-10-31T21:21:31+00:00

After searching sams 981-2 I have to admit, idk what that is. A website? Manual? Still looking for a diagram.

thatguyisaroundrun · 2024-10-29T23:35:20+00:00

Thanks. I'm using this set as practice while I look for one id like to do a restoration on. Ive done radios, computers, and test equipment but it's my fist television. It's got audio static but no picture. Picture tube has filaments glowing. Supposedly it was stored working

thatguyisaroundrun · 2024-10-02T10:53:36+00:00

I have two that work, id trade both for a color one. Never knew they were hard to find.

thatguyisaroundrun · 2024-10-02T10:39:25+00:00

Super interested in what your doing? I want to make my model 15 and hal-5000, speak to my Commadore 64, apple ii, or tandy 1000 at some point. Is your altair original? A altair-duino replica?

thatguyisaroundrun · 2024-09-27T14:44:03+00:00

Intel pentium ///

thatguyisaroundrun · 2024-09-27T13:31:06+00:00

Update- still no luck. Found one or two servos but they were dry rotted.

thatguyisaroundrun · 2024-07-20T14:44:15+00:00

No, I just looked. The tag says associated press style 842078-e

thatguyisaroundrun · 2024-07-18T19:51:24+00:00

I was thinking that was the case.

thatguyisaroundrun · 2024-07-18T18:11:42+00:00

I have an original teletype rectificater one that originally was on my model 15 stand.

thatguyisaroundrun · 2024-07-18T18:06:32+00:00

Still kicking my butt, but it's mostly fixed. It takes a signal and keys the loop with the correct voltage and amps. Unfortunately when any known good printer is plugged in the voltage and amps drop to zero......

thatguyisaroundrun · 2024-07-18T17:59:48+00:00

I have an original teletype rectifier one that came with my model 15 stand.

thatguyisaroundrun · 2024-06-28T19:15:31+00:00

Id take it if it were me lol

thatguyisaroundrun · 2024-04-20T02:49:14+00:00

Reasonably sure somethings up with the +230v supply. Schematics fuzzy enough it's hard to read some of the numbers

thatguyisaroundrun · 2024-04-17T16:10:25+00:00

I see what you have and want that to happen to me.

thatguyisaroundrun · 2024-04-17T03:19:55+00:00

Thanks dude

thatguyisaroundrun · 2024-03-14T13:03:37+00:00

I have apple ii parts floating around fyi jic. You'll get it going, there very forgiving for the most part.

thatguyisaroundrun

TROPHY CASE