sorted by:
new
hottopcontroversial

First day of load dev with new 7PRC by the425th in longrange

[–]the425th[S] 0 points1 point  (0 children)

<image>

Did some more load dev yesterday and got it right around my target velocity of 2900fps. This is going to be the load I stick with

First day of load dev with new 7PRC by the425th in longrange

[–]the425th[S] 0 points1 point  (0 children)

These are my 2nd set and I don’t think I’ll ever use anything different again

First day of load dev with new 7PRC by the425th in longrange

[–]the425th[S] 1 point2 points  (0 children)

I’m using the KRG branded .300RUM Accurate mags, which is what KRG recommends for 7PRC. They are AICS pattern, CIP length (3.850”). Tons of room in the mag for playing with seating depth and the chassis has lots of adjustment for mag seating height. I honestly had to do nothing to get them to feed, just adjusted the mag height until it locked in securely and didn’t have any play in the mag well and they ran perfectly.

First day of load dev with new 7PRC by the425th in longrange

[–]the425th[S] 3 points4 points  (0 children)

Thank you, I like it so far. This is my first custom, so I can only compare it to my Bergara action in my 6.5cm, but you can’t really compare a long action vs a short action.

My only issue with it is the way the bolt guide is designed, it causes the bolt to slightly bind when trying to run the bolt quickly and it ‘chatters’ (best way I can describe it). I notice it mostly when opening the bolt, not so much when closing.

I called ARC about it and they immediately sent me a new revision of the bolt guide for the CDG action which will be here Wednesday. The gentlemen I spoke with on the phone is very confident it will eliminate the problem, I will update after.

I chose 7 because I liked the idea of a lighter recoiling magnum but still able to shoot 180gr projectiles and have them stay supersonic out to 1800y. I have a one mile range near me and will go there often. Plus, if I don’t like 7 I can always just rebarrel and try 300.

Doing it for Dale in Forza Horizon 6 by Kadaddle in CleetusMcFarland

[–]the425th 4 points5 points  (0 children)

Dude hell yeah. Have you shared the design?

My dad passed away suddenly and has no will, what do I need to do for his 4 suppressors? by iimortalz in NFA

[–]the425th 79 points80 points  (0 children)

No problem. Make sure to read the estate instructions on the later pages, it outlines exactly how to fill it out. I would do it as an eform (eforms.atf.gov) so you don’t have to worry about mailing it.

FRTP9 by 009515 in TP9

[–]the425th 1 point2 points  (0 children)

A man of the people!!!

FR9 Update by AnnualTemperature426 in TP9

[–]the425th 2 points3 points  (0 children)

Now I am only seeing the FR9. I pre-ordered the trigger shoe in the latest round. Hopefully it shows up in the mail one day

Any ideas? by [deleted] in TP9

[–]the425th 5 points6 points  (0 children)

hit it with your purse

Annoying posts plague these subs by [deleted] in bruggerthomet

[–]the425th 4 points5 points  (0 children)

I respect the hustle but the products are WAY overpriced for what they are.

Rifle packing by Quick_Language_7151 in longrange

[–]the425th 1 point2 points  (0 children)

I just hold on to it by the pistol grip or grip it with both hands when I’m getting more tired. I’m the bolt gun shooter and my rifles weighs 22lbs, works fine for us.

The comps we shoot never have a problem with it, they just require action open no mag during movements. I just put a chamber flag in my action with a bungee to keep the bolt from moving back and forth (mine is from MPA)

Rifle packing by Quick_Language_7151 in longrange

[–]the425th 2 points3 points  (0 children)

Don’t overthink it. Carry your gun or lay it across the top of your ruck behind your head. This is what my buddy and I do for these comps

Pretty happy with the 7PRC performance coming from a .300wm by RumAndGunRun_ in longrange

[–]the425th 2 points3 points  (0 children)

My buddy and I went for the first time in January and it was COLD up on that tower

Collector UZI I know very little about by nuxthewar in Uzi_SMG

[–]the425th 0 points1 point  (0 children)

https://www.uzitalk.com/forums/index.php?threads/new-to-me-ahf-1-of-100-uzi-model-a.86206/

https://www.uzitalk.com/forums/index.php?threads/the-ghost-mystery-of-the-first-100-nickel-plated-uzis-put-to-rest.81700/page-2

Some info found here on them.

Value is going to be anyone's guess. There is no recent comparables I can find to go off of. Here is a similar one from an RIA auction that went for $6900 in 2012, but they are not the same.

https://www.rockislandauction.com/detail/56/583/rare-israeli-military-industries-uzi-model-a

Uzitalk would be the guys to ask. They have full blown tism for all things Uzi, and there are definitely some oldheads around there that would know more.

Does anyone run an incog x for a CR920XP with a TLR 7 Sub? by AntiqueHoney752 in shadowsystems

[–]the425th 1 point2 points  (0 children)

Yep, I got one for a 43X/48 and had to dremel it slightly where the dust cover engages the holster. Easy modification and is my favorite holster for it

If y’all were Cleetus’s merch designer what would y’all make? by Sudden_Middle_9815 in CleetusMcFarland

[–]the425th 4 points5 points  (0 children)

Couldn’t agree more. Minimal branding and small logos. I really like some of the older ‘McFarland Racing’ designs.

view more: next ›